Appliances Bath Blinds & Window Coverings Building Materials Cleaning Décor & Furniture Doors & Windows Electrical Floors & Area Rugs Hardware Heating & Cooling Kitchen Lighting & Ceiling Fans Lumber & Composites Outdoor Cooking & BBQs Outdoor Living & Patio Paint Plumbing Smart Home Storage & Organization Tools All Departments Refresh for Less Bath Event
Our checkouts are officially plastic bag free! Remember to bring your reusable bag or purchase one of ours online or in store.  Shop Now
Varathane Professional Oil-Based Clear Finish in Semi-Gloss Clear, 236 mL

Varathane Professional Oil-Based Clear Finish in Semi-Gloss Clear, 236 mL

Model # Y100061|Store SKU # 1000111858

Overview

Model # Y100061 Store SKU # 1000111858

Varathane Professional Clear Finish is specifically developed to enhance the natural beauty of wood while providing the best scratch and stain resistance available. Varathane Professional Clear Finish is ideal for all interior projects such as furniture, doors, cabinets, and trim. Over twice as durable as traditional wood finishes, Professional Clear Finish adds a warm, golden glow to your project. It has the fastest dry time of any oil-based polyurethane and is self leveling to save you time. Recommended use with Varathane Premium Oil Stains and Premium Gel Stains.

  1. ideal for all interior projects such as furniture, doors, cabinets, and trim
  1. Over 2X as durable as traditional wood finishes
  1. Fas the fastest dry time of any oil-based polyurethane and is self leveling to save you time
  1. Recommended use with Varathane Premium Oil Stains and Premium Gel Stains

Specifications

Dimensions

Assembled Depth (in inches)
2.85
Assembled Height (in inches)
2.85
Assembled Weight (in lbs)
9.85
Assembled Width (in inches)
2.85
Packaged Depth (in inches)
2.875
Packaged Height (in inches)
3
Packaged Weight (In lbs)
0.667
Packaged Width (in inches)
2.875

Details

Base Material
Oil-Based
Can Size (L)
0.236
Colour Family
Clear
Country of Origin
CA-Canada
Coverage Area (Sq. Ft.)
37
Eco Options Category
None
Low VOC
No
Process Step
Protection
Sheen
Semi-Gloss
Special Features
Dries Clear
Stain & Sealer in One
No
Transparency
Clear Toner

Warranty / Certifications

For questions, concerns and comments regarding Rust-Oleum products, please contact 1-800-387-3625
Oil-Based Clear Finish in Semi-Gloss Clear, 236 mLVarathane Professional Oil-Based Clear Finish in Semi-Gloss Clear, 236 mLVarathane Professional Clear Finish is specifically developed to enhance the natural beauty of wood while providing the best scratch and stain resistance available. Varathane Professional Clear Finish is ideal for all interior projects such as furniture, doors, cabinets, and trim. Over twice as durable as traditional wood finishes, Professional Clear Finish adds a warm, golden glow to your project. It has the fastest dry time of any oil-based polyurethane and is self leveling to save you time. Recommended use with Varathane Premium Oil Stains and Premium Gel Stains.
Varathane Professional
1000111858
Oil-Based Clear Finish in Semi-Gloss Clear, 236 mL is rated 4.3 out of 5 by 81.
  • y_2023, m_2, d_6, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_49, tr_32
  • loc_en_CA, sid_1000111858, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 72ms
  • REVIEWS, PRODUCT
Rated 2 out of 5 by from Poor quality Have used this on a couple projects and not impressed with the quality. I much prefer the minwax to this brand as the minwax has given me a smoother finish and proven more durable to the wear and tear of my young children. I did like the quick drying time but overall disappointed in the product.
Date published: 2013-02-09
Rated 1 out of 5 by from Avoid! First off, I would have given this zero stars since I returned it after tirelessly trying to get a smooth finish but, to no avail. This product is too thick and dries too fast. you apply too thin you’ll get brush strokes, any more you get bubbles, which don’t settle. I’ve followed the instructions on the label and the PDF online and you just can’t work with this stuff. $25 natural brush, near empty jar and sandpaper all being returned. I did 4 coats, and wasted too much time with this stuff. Save yourself. Gloss/Colour is nice though. Lol
Date published: 2019-12-10
Rated 1 out of 5 by from Used to be good This used to be really good finish. The formula or something changed and this is nowhere near professional result. I would not recommend to use this on anything that gets actual use like table top or furniture. After less than 1 year the finish starts to flake off (and no this is not a one bad batch this happens with different cans). Low quality at ridiculous price and the worst thing is HD doesn't offer any competitive alternative anymore either (what happened to MinWax?)
Date published: 2021-11-10
Rated 1 out of 5 by from Satin Finish it is not! I bought this and received it in curb side delivery from Home Depot. Can't find out how to get a refund so I guess I'm stuck with it, When you buy "Satin" you expect a satin finish. It was at least Semi Gloss. Lucky I still had a competitors product to finish my project. Buyer beware.
Date published: 2020-04-28
Rated 4 out of 5 by from Great Finish but one tip I used this product to spray a stained cabinet door. The first coat worked out perfect, level and even shine. When finished I immediately inverted the can and sprayed until there was air to clear the nozzle so I could reuse the can for the second coat. 30 minutes later I went to spray the second coat and it sputtered (small blobs) creating a not so nice 2nd coat. I am going to guess some varathane dried up in the nozzle. So I am going to suggest varathane Aerosol is a one time use unless the manufacture can respond with a solution around this issue of second use.
Date published: 2022-01-18
Rated 5 out of 5 by from Finish on fir floors looks beautiful I really liked the product but the applicator that we were told to spread it was awful and caused so many bubbles. We applied it on stairs with a brush and it’s absolutely beautiful.
Date published: 2020-05-18
Rated 5 out of 5 by from Good Went on smoothly without all the bumps one usually gets, so no sanding in between was needed. We did buff if after the third coat tho', using different stages of 1000+ grit sanding paper. Nice glossy shine.
Date published: 2020-08-11
Rated 5 out of 5 by from No Comparison to Water-Based Products Amazing product. Will purchase again. Matte finish hides floor imperfections. Varnish dries to a hard durable finish, which is impervious to light scratches and liquids, unlike water based varnish. Also protects wood floors from drying out with reduced humidity during the winter. Applied 3 coats. Major odour dissipates within few hours. Dry within 5 hours but left to dry at least 12 hours before light sand and recoating.
Date published: 2021-03-27
  • y_2023, m_2, d_6, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_49, tr_32
  • loc_en_CA, sid_1000111858, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Can you finish painted particleboard or MDF with this product?

Asked by: Jbeca
I am not a professional but, from experience with what I believe to be a similar product,my opinion is that as long as the surface is COMPLETELY sealed by the paint it should be o.k.
Answered by: Old hobbyist
Date published: 2021-02-02

A Home Depot employee suggested this to cover/seal a white arborite kitchen countertop. The can & description online it says it dries with an amber (or warm) effect/finish. I would a clear finish. Which product should I buy?

Asked by: MeJaneMac
Hi MeJaneMac, We have not tested our Oil-Based Clear Finish on laminate surfaces like arbonite. Our clear finishes were designed for wood that is bare or stained. We recommend our Stoneffects High Gloss Clear Epoxy instead.
Answered by: Rust-Oleum Answers
Date published: 2023-01-26

Is this product food-safe?

Asked by: TBear
I don't believe it is, if you are building or refinishing a cutting board or something that is going to used for food - try WATCO Butcher Block oil and finish -
Answered by: John
Date published: 2022-02-11

I plan on keeping the woods natural colour and not staining. The wood is alder, do I still need to use a wood conditioner?

Asked by: CaraP
I have used this oil product on Fir and Hemlock without a wood conditioner. It brings the grain and character of the wood to life. So much better than a Diamond water based product does.
Answered by: Scotty
Date published: 2021-11-24

Is this product good for restoring old wall wood panels? the paneling still has a nice pecan color.

Asked by: ed82
Yes, Varathane Pro Finisher would be an excellent choice for wood panels. If you suspect a previous coating has already been applied, clean the surface well, and scuff it with 220 grit sandpaper before applying the Varathane Pro Finisher.
Answered by: Rust-Oleum Answers
Date published: 2018-04-19

I'm looking for a clear coat oil-based for an external stained wood door. Can this be applied on external stained wood door? If not, can you suggest an alternative.

Asked by: JJJJ
The Varathane Pro Finisher is designed for interior use only. However, Varathane does manufacture an Exterior Oil-Based Finish that would work very well to finish your stained wood door.
Answered by: Rust-Oleum Answers
Date published: 2018-08-08

What is the temperature rating of this product when it is cured? I'm looking to use it for a workbench table top in my uninsulated garage.. Would it be OK if I assumed it's environment reached between -40C & 120C?

Asked by: Benny
Hi Benny, Once our Professional Oil-Based Clear Finish has cured, depending on the number of coats (3-4 weeks), the coating will be fine in those temperatures.
Answered by: Rust-Oleum Answers
Date published: 2021-10-13

Can I use this over a lacquered finish?

Asked by: Snowbird
Hi Snowbird, As long as the lacquered finish has dried hard, we do not see an issue with applying the Professional Oil-Based finish overtop. However, this is something you would have to test on your own. That being said, lacquer finishes are a harder finish and does not require another clear finish overtop.
Answered by: Rust-Oleum Answers
Date published: 2022-08-12
  • y_2023, m_2, d_6, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_CA, sid_1000111858, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 79ms
  • QUESTIONS, PRODUCT