Canada Day Event is on now. Don't wait!  Shop Now

Overview

Model # 682048 Store SKU # 1000682048

Upgrade your deck with the classic elegance of Veranda! With Veranda, you'll find the perfect finishing touches to truly complete your deck. Start with our range of Aluminum Deck Rail Kits and Aluminum Stair Rail Kits. Choose from round balusters, rectangular balusters or baroque balusters to suit your style. Then, complement your railing with our Pre-Assembled Aluminum Arched Deck or Fence Gate. Finally, accessorize with our Plastic Diamond Fence and Gate Accent, or our range of Plastic Post Caps and Plastic Deck Rail Brackets. Veranda products combine long-term durability with simple yet elegant design to enhance any outdoor setting. These patented Rigid Plastic 4-Sided Deck Rail Brackets are ideal for attaching bottom horizontal rails to deck posts. Constructed from rigid plastic, these rail brackets are stronger than toenailing and prevent the rail from twisting. Each package comes with two pre-drilled rail brackets.

  1. 4-sided rail brackets
  1. Ideal for attaching bottom horizontal rails to deck posts
  1. Rigid plastic construction for long-term durability
  1. Stronger than toenailing and prevent rails from twisting
  1. Pre-drilled for convenience
  1. Package includes 2 rail brackets

Specifications


Colour Family

Black


Material

Plastic


Accessory Type

Other


Features

Fasteners Included

Dimensions

Assembled Depth (in inches)
0.6
Assembled Height (in inches)
4
Assembled Weight (in lbs)
0.38
Assembled Width (in inches)
2
Packaged Depth (in inches)
20
Packaged Height (in inches)
9.75
Packaged Weight (In lbs)
0.38
Packaged Width (in inches)
5.5

Details

Accessory Type
Other
Colour Family
Black
Country of Origin
CN-China
Features
Fasteners Included
Material
Plastic

Warranty / Certifications

For more information, please contact Peak Products customer service at 1-877-883-7325
2-inch W x 4-inch H Rigid Plastic 4-Sided Deck Rail Brackets in Black (2-Piece)Veranda 2-inch W x 4-inch H Rigid Plastic 4-Sided Deck Rail Brackets in Black (2-Piece)Upgrade your deck with the classic elegance of Veranda! With Veranda, you'll find the perfect finishing touches to truly complete your deck. Start with our range of Aluminum Deck Rail Kits and Aluminum Stair Rail Kits. Choose from round balusters, rectangular balusters or baroque balusters to suit your style. Then, complement your railing with our Pre-Assembled Aluminum Arched Deck or Fence Gate. Finally, accessorize with our Plastic Diamond Fence and Gate Accent, or our range of Plastic Post Caps and Plastic Deck Rail Brackets. Veranda products combine long-term durability with simple yet elegant design to enhance any outdoor setting. These patented Rigid Plastic 4-Sided Deck Rail Brackets are ideal for attaching bottom horizontal rails to deck posts. Constructed from rigid plastic, these rail brackets are stronger than toenailing and prevent the rail from twisting. Each package comes with two pre-drilled rail brackets.
Veranda
1000682048
2-inch W x 4-inch H Rigid Plastic 4-Sided Deck Rail Brackets in Black (2-Piece) is rated 4.5 out of 5 by 26.
  • y_2024, m_6, d_24, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_15, tr_11
  • loc_en_CA, sid_1000682048, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 57ms
  • REVIEWS, PRODUCT
Rated 2 out of 5 by from Very tight fit... The clips are difficult to install on even slightly swollen 2x4 lumber (PT or cedar). Best to dry lumber a few days at lower humidity or at least keep it dry before installing... I used an orbital sander with 80 grit sand paper to lightly bevel each end of the 2x4 before hammering the clip on. The clip could have been 1/8th of an inch larger... Instructions say to remove an extra 1/2 inch from the lumber to allow space for the clip on each side. I removed a little less (7/16th) for a better fit. A couple of the screws provided (on 20 sets) had defects that rendered them useless (i.e. head clogged with metal or deformation). In these cases I used regular deck screws in the hidden part of the clip (center/middle holes). The clip does solidly secure the rail to post!
Date published: 2014-09-12
Rated 5 out of 5 by from Fit perfect look great I installed about 35 ft of railing and we did not want a cap as we live across from a park, so we installed the closed bracket on the top and bottom for a nice finish. We were using the pro pack of railings so we had to buy the clips anyway. The caps fit perfect on the pre-drilled wood that is sold as part of the railing system. - we are very pleased with the result, looks really spart
Date published: 2020-06-27
Rated 4 out of 5 by from So easy to use and solid as a rock Other reviews have mentioned the sizing was a bit too tight, but mine were like they were custom fit for my rails (just cedar from the lumber yard, no special rail system). I'm not sure if there's been a change to the mold or something, but out of 26 pairs of these on my project, only one set was too tight. I suspect that the one rail was oversize or wet and that's why the brackets were tight. A quick couple of scrubs on the rail end with a sanding block took care of the issue. The clips look really professional and do a great job of holding that rails in place. They're strong, and have kept the rail from twisting so far. My only grief about them is the cost. I wish they were a little bit less money, but then you can say that about a lot of things. They work well, are quick and easy to use, and on my deck they added a nice visual element at the bottom of the railings.
Date published: 2015-06-24
Rated 5 out of 5 by from I am really pleased with these clips Several reviewers have complained about the clips being too tight or too loose. This is due to shrinkage or swelling of the 2x4. I had one piece of lumber that as too tight on one end and too loose on the other. If too loose, no worries, the back screws do most of the initial holding. The side and end screws press the clip tight. If too tight, sand the edges a bit and tap the clip on. The plastic is very tough and will take the pounding. One reviewer commented about the required 1/2" less rail length to allow for the thickness of these clips and suggested to allow 7/16" for a tighter fit. I measured the clips with a Vernier caliper and they are exactly 1/2". So measure the space between posts accurately, allow for your own skill in measuring and subtract 1/2". You'll be fine. The real problem I had was that my posts were twisted and hence the rails were up to 6º off perpendicular. I made appropriate final fitting using a belt sander. And even with this slight angle, the clips were still just fine. Finally I want to say that my railing design was to have a top cap all around. I discovered that rather than using the two sided variety of this clip for this purpose, I was able to cleanly cut away the side without the screw hole to make a flush-fitting 3 sided clip. The plastic cuts easily without shattering on a table saw with a regular carbide blade. See photos
Date published: 2020-11-12
Rated 5 out of 5 by from Works as expected! Just used these to install my top and bottom rails for my deck. Others seemed to have issues with fitment, but they worked just perfectly for my 2x4 pressure treated wood. The fitment is tight, but with a few seconds of making sure they're going on straight, they worked wonderfully and keep the rails absolutely solid.
Date published: 2016-04-28
Rated 3 out of 5 by from When they fit they are great, however... I used these clips on green pressure treated 2x4s. More often than not the studs would not fit into the clips (wood too big, clips too small). The solution was to beat the edges of the 2x4s in with another piece wood rounding them off. When that didn’t work I had to trim the edges off. Eventually I had to switch to the open ended clips. They probably would have worked well with 2x4s that were aged a bit and shrinkage had occurred.
Date published: 2018-08-14
Rated 4 out of 5 by from Clips worked well The 6 foot kit has one set of clips so if you need to cut the 6 foot rail into 2 shorter sections, you need an extra set of clips. These were a little tight on dry wood but was able to seat them with a mallet, It is worth noting this DOES include the screws which the product description does not mention. The finish is a little shinier than the original clips.
Date published: 2019-07-11
Rated 1 out of 5 by from Does not fit a standard PT 2x4 These are too small to fit over the end of a standard 2x4. Clearly meant for a rail system of some kind, but not for standard dimension lumber.
Date published: 2014-08-20
  • y_2024, m_6, d_24, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_15, tr_11
  • loc_en_CA, sid_1000682048, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms
  • REVIEWS, PRODUCT

Do they come with screws? If not what kind of screws are needed?

Asked by: Anton
Complete with screws
Answered by: munk
Date published: 2023-03-28

What is the difference between the 4 sided and 2 sided?

Asked by: Catou1608
Hello Catou1608, thank you for question. The 4 sided clips are for the bottom rail and the 2 sided clips are for top rail or stair railings.
Answered by: Product Expert
Date published: 2024-06-14

Do they come with screws?

Asked by: Mick
Hi Mick, thanks for your question. Yes these clips come with fasteners. Thank you.
Answered by: Product Expert
Date published: 2021-06-08

Can these be installed with posts at an angle of between 30-45 degrees?

Asked by: Jason
Those rail brackets only work on horizontal rails , they have four flanges, that are sized to fit a 2x4 rail which when seated in the opening can be fastened through the flanges If you need to use an angle cut on a 2x4 you should use the stair rail bracket that only has two side flanges and the top and bottom are open to allow the longer angle cut to overlap the bracket and be fastened through the side flanges
Answered by: Pete27
Date published: 2023-09-11

What screws should be used with these?? For people ordering on line, you really should post more information.

Asked by: der_rittmeister
Hello, Thank you for your question. Kindly note these clips come with fasteners required assembly. For more information you can contact us directly at toll-free +1 (877) 883-7325.
Answered by: Product Expert
Date published: 2023-01-23
  • y_2024, m_6, d_24, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_CA, sid_1000682048, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 66ms
  • QUESTIONS, PRODUCT