Early Black Friday savings are here.  Shop Event

Overview

Model # PTC120-7W-009-WY Store SKU # 1001798852

A burst water pipe in the dead of winter can be a huge inconvenience and completely replacing the insulation needed to prevent pipes in perimeter walls and crawlspaces from freezing can be cost-prohibitive. To keep your most vulnerable pipes from freezing, the simple and DIY-friendly solution is to install a PRO-Tect heating cable for pipes. This 120 V plug-in heating cable generates heat (7 watts per linear foot) which will keep your pipes from freezing in low temperatures. The integrated thermostat control, located between the non-heating lead cable and the heating wire itself, will ensure a consistent temperature while minimizing energy use. The thermostat turns the heating cable on when exposed to temperatures below 37.4°F (3°C). It will shut the heating cable off when the pipe has been heated to a temperature of approximately 50°F (10°C). The cable is covered by a 2-year warranty.

  1. This 9' cable is great for 3/8” – 3/4" diameter pipes up to 11’ long and 1” – 1 1/2” diameter pipes up to 9' long
  1. Easy plug-in operation with indicator light and integrated thermostat
  1. Stops pipes from freezing at temps as low as -40°F/-40°C
  1. 7 watts per linear foot (constant wattage)
  1. This kit includes 1 plug-in heating cable
  1. Safe: cUL Listed, CSA Listed, and cETLus Listed

Specifications

Dimensions

Packaged Depth (in inches)
7
Packaged Height (in inches)
12
Packaged Weight (In lbs)
3
Packaged Width (in inches)
10

Details

Assembled Depth (in inches)
0.31
Assembled Height (in inches)
0.31
Assembled Weight (in lbs)
1.1
Assembled Width (in inches)
108.0

Warranty / Certifications

9 Ft Pipe Heating Cable Kit Plug_In 120VWarmlyYours 9 Ft Pipe Heating Cable Kit Plug_In 120VA burst water pipe in the dead of winter can be a huge inconvenience and completely replacing the insulation needed to prevent pipes in perimeter walls and crawlspaces from freezing can be cost-prohibitive. To keep your most vulnerable pipes from freezing, the simple and DIY-friendly solution is to install a PRO-Tect heating cable for pipes. This 120 V plug-in heating cable generates heat (7 watts per linear foot) which will keep your pipes from freezing in low temperatures. The integrated thermostat control, located between the non-heating lead cable and the heating wire itself, will ensure a consistent temperature while minimizing energy use. The thermostat turns the heating cable on when exposed to temperatures below 37.4°F (3°C). It will shut the heating cable off when the pipe has been heated to a temperature of approximately 50°F (10°C). The cable is covered by a 2-year warranty.
WarmlyYours
1001798852
CAD85.982026-11-13
The Home Depot Canada
00