Waterline Pex Crimp Ring Handi Pac

1/2" Pex Crimp Ring Handi Pac is intended for water distribution systems. They come in a conveniently sized pack, are made of forged brass making it approximately 15% stronger than brass counterparts and are virtually free of imperfections. This plug is high quality as it is certified by the Canadian Standard for Pex Pipe and Fittings, as it has passed pressure testing at three temperatures. It has a maximum working pressure of 690kPa at 82C.

Waterline 1/2 Inch Pex Crimp Ring

1/2" pex crimp ring is used for water distribution systems. it is made from forged brass, making it approximately 15% stronger than brass counterparts and are virtually free of imperfections. this crimp ring is high quality as it is certified by the Canadian standard for pex pipe and fittings, as it has passed pressure testing at three temperatures. it has a maximum working pressure of 690kpa at 82c.

Waterline 1/2" PEX Barb Coupling

For use with pex pipe, can be used with copper crimp rings or stainless steel pinch clamps. Good for hot and cold potable water up to 200psi and 180 degrees for hot.

Waterline 1/2 Inch Pex Tee Water Hammer Arrester

Water-Rester's Water Hammer is a pressure surge caused when water flow is forced to stop or change direction suddenly. This sudden stop results in a spike of pressure, causing rattling and shaking pipes. Water Hammer Arresters prevent damage to the plumbing system due to excessive water pressure. This pressure creates a potential failure of plumbing connections, fixtures and appliances. Water Hammer Arresters absorb the pressure spike, controlling water hammer.