• Panier
  • <?xml version="1.0" encoding="utf-8"?>
    NOS PRIX SONT IMBATTABLES. NOUS LE GARANTISSONS.Certaines conditions s’appliquent
    <?xml version="1.0" encoding="utf-8"?>

    Agri-Fab Chip-n-Vac

    Modèle nº 45-0540|Nº UGS 1001357723

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # 45-0540 Internet # 1001357723

    Le Chip-N-Vac Agri-Fab avec son moteur Briggs and Stratton 208 cc puissant est fourni avec un chariot, un combiné aspirateur-déchiqueteur et un adaptateur de plateforme de coupe de tracteur. Conçu pour s'adapter à 40 plateformes de coupe différentes, cet appareil a un capot rigide pour réduire la poussière, une capacité de 26 boisseaux (0,9 m3) et un pouvoir aspirant de 80 mph (128 km/h). Peut déchiqueter des branches de 2 po (5 cm) de diamètre en paillis utilisable ou pour en faciliter l'élimination. L'appareil est livré assemblé à 75 %; en un rien de temps, vous pouvez terminer l'assemblage et l'utiliser.

    1. Sa grande capacité de 26 boisseaux (0,9 m3) signifie moins d'arrêts
    1. Déchiquette facilement les branches de 2 po (5 cm) de diamètre
    1. Le pouvoir aspirant de 80 mph (128 km/h) suffit pour les feuilles, les aiguilles de pin et les tontes de gazon
    1. Conception polyvalente permettant son installation sur 40 plateformes de tracteur différentes de 54 po (137 cm) de largeur gabarits inclus
    1. Les plus grandes plateformes et tondeuses à rayon de braquage zéro exigeront un ensemble de rallonge de tuyau (no 65640)
    1. Le concept à capot rigide ventilé durable réduit les poussières en suspension dans l'air

    Spécifications

    Dimensions

    Hauteur assemblé
    62
    Hauteur de l’emballage (en pouces)
    55
    Largeur assemblée
    33
    Largeur de l’emballage (en pouces)
    33.5
    Poids assemblé
    350
    Poids de l’emballage (en livres)
    370
    Profondeur assemblé
    96
    Profondeur de l’emballage (en pouces)
    52.25

    Détails

    Pays d'origine
    US-United States

    Garanties et certifications

    Garantie limitée de 3 ans
    Chip-n-VacPhoto of productLe Chip-N-Vac Agri-Fab avec son moteur Briggs and Stratton 208 cc puissant est fourni avec un chariot, un combiné aspirateur-déchiqueteur et un adaptateur de plateforme de coupe de tracteur. Conçu pour s'adapter à 40 plateformes de coupe différentes, cet appareil a un capot rigide pour réduire la poussière, une capacité de 26 boisseaux (0,9 m3) et un pouvoir aspirant de 80 mph (128 km/h). Peut déchiqueter des branches de 2 po (5 cm) de diamètre en paillis utilisable ou pour en faciliter l'élimination. L'appareil est livré assemblé à 75 %; en un rien de temps, vous pouvez terminer l'assemblage et l'utiliser.
    Agri-Fab
    1001357723
    CAD3098
    The Home Depot Canada
    Chip-n-Vac est évalué 4.1 de 5 de 54.
    • y_2019, m_9, d_19, h_19
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_54
    • loc_fr_CA, sid_1001357723, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 169ms
    • REVIEWS, PRODUCT
    Rated 5 de 5 de par I assembled the Agri-Fab in less that an hour. The... I assembled the Agri-Fab in less that an hour. The vacuum portion of the rig work awesome, still looking forward to using the chipper portion.
    Date de publication: 2019-05-15
    Rated 5 de 5 de par Glad I bought it! This unit works very well. I used a Billy Goat vacuum last year and the leaves on my two acres were too much for it and me. I am 75 years old and wanted something requiring less labor and that would last. It worked well but I emptied the bags over 50 times and still didn’t finish. I have already used this new machine to clean up the leftovers from last year and it does a great job. Definitely reduced my labor. I would suggest they make improvements in how the hoses attach. It is difficult to prevent the hoses from slipping off during turns. It would also be nice if they would engineer the attachment to the mower so it is easier to change between the mower and the vacuum. I have seen it done with other manufacturers so I know it is possible.
    Date de publication: 2019-05-14
    Rated 5 de 5 de par Performs very well. Good suction. I have 2 acres with... Performs very well. Good suction. I have 2 acres with lots of trees/leaves. Last year I used a Billy Goat to clean up. I emptied over 50 bags and still didn’t get all. This spring I finished the clean up with the new Agri-fab and filled it twice. Definitely glad I purchased. Home Depot had the best price I could find. Cons: Hoses come off fairly easy due to hose clamp system they use. Tilt trailer not very useful for clean out but easy enough with rake. Whoever assembles needs to be somewhat handy and better if done by two people.
    Date de publication: 2019-05-14
    Rated 5 de 5 de par It wasn’t hard to put together, I did it myself,... It wasn’t hard to put together, I did it myself, the tricky part was mounting the motor myself. It was about an hour to put it together.
    Date de publication: 2019-05-10
    Rated 4 de 5 de par I’be had one over 10years, got 2 acre of grass & trees, it has The Tecumseh 8hp engine starting to getting wore out, the change I made was have a guy weld about 12” channel up right on the tongue and weld a lift on it with a caster on it. Do not have to lift any more and roll around without lifting unit that was always the hardest thing to do. First time this year after de-thatching my yard used to pick up thatch, useally on Did leaves in the fall chipper/vac twigs/leaves.
    Date de publication: 2019-04-26
    Rated 4 de 5 de par A great tool -- in the right hands Have had my Chip-N-Vac for 2 years -- it has some quirks, but overall has been a great investment. It does take a bit of work to set up for your mower -- but the templates provided take some of the guesswork out of making the initial cuts to fit your brand of mower. The hose extension is a must for a zero-turn mower, but it then drags and gets caught on the back of the mower. I had to add a bar/brace that sticks off the side of the back of my zero-turn to strap the hose to -- in order to keep the hose from dragging the ground. I'll echo the sentiment of a lot of the reviews on here -- the Chip-N-Vac needs some type of electric start. I appreciate the use of the Briggs and Stratton engine, but perhaps looking at a cheaper alternative might allow for an electric start while keeping the unit at the same price point. Even Briggs and Stratton make a 208cc engine with electric start -- all of the snowblowers use them. Pull starting the Chip-N-Vac is nearly impossible after it has sat up for a week or two.
    Date de publication: 2019-04-03
    Rated 4 de 5 de par Almost Perfect I love it and would give it a 5 if the tongue weight wasn't so much. Bending low to lift it is no way to go, but I made and extension to the handle. Would be a nice touch to have the guard over the exhaust painted red. And there was no template for it to fit my 48" exmark deck. I made an adapter. Other that that I love the way way it licks everything up and mulches it as fine as it does. Very pleased with its performance.
    Date de publication: 2019-04-01
    Rated 4 de 5 de par 1st use It worked great for 2 hours the vac hose broke at blower
    Date de publication: 2019-03-30
    • y_2019, m_9, d_19, h_19
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_54
    • loc_fr_CA, sid_1001357723, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 32ms
    • REVIEWS, PRODUCT
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 108ms
    • QUESTIONS, PRODUCT
    • bvseo-msg: The resource to the URL or file is currently unavailable.;
    <?xml version="1.0" encoding="utf-8"?>