Articles pour l’extérieur et terrasses Climatisation et chauffage Cuisine Cuisson à l'extérieur et barbecues Décor et Meubles Électricité Électroménagers Luminaires et ventilateurs de plafond Maison intelligente Matériaux de construction Organisation et entreposage Outils Peinture Plomberie Portes et fenêtres Produits nettoyants Quincaillerie Revêtements de sol Salle de bain Stores et habillages de fenêtre Terrasses, bois de consturction et composite Tous les départements Décorations Halloween Rénovez à bon prix Dewalt événement puissance MAX
Liste d'entretien de la maison.  Apprendre encore plus!

Arrow Commander Remise a usages multiples (10 Pi. x 20 Pi.)

Modèle nº CHD1020|Nº UGS 1000769710

Arrow Commander Remise a usages multiples (10 Pi. x 20 Pi.)

Aperçu

Modèle # CHD1020 Internet # 1000769710

La remise utilitaire de jardin de 3,0 x 6.1 m / 10 x 20 pi vous offre avantage et espace. Cette ouverture extra grande à portes pivotantes accommode facilement les outils et équipements de grande taille. Idéal comme atelier ou centre de hobby!

  1. Capacité de 38.1 m3 / 1,346 pi3 pour ranger une grande variété de doutils et déquipements
  1. Hauteur intérieure de plus de 2,3 m / 7 pi 7 po au centre vous assurant un dégagement et espace de travail additionnels
  1. Ouverture extra large à portes pivotantes permettant le rangement de tracteurs de jardin avec plate-forme jusquà 137 cm / 54 po de largeur
  1. Année après année, une solution de rangement durable en acier galvanisé
  1. Design de fermes de toit à bas profil pour plus de résistance de la structure
  1. Pièces coupées et forées au préalable, pour assurer un assemblage plus rapide

Manuel

  1. Instructions_1000769710.pdf

Home Depot fournira sur demande un document PDF en version accessible. Veuillez nous contacter au
1-800-628-0525.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
93
Hauteur de l’emballage (en pouces)
17
Largeur assemblée (en pouces)
124
Largeur de l’emballage (en pouces)
34
Poids assemblé (en livres)
575
Poids de l’emballage (en livres)
585
Profondeur assemblé (en pouces)
244
Profondeur de l’emballage (en pouces)
80

Détails

Assemblage
Assemblage rapide
Capacity (Gal.)
38142
Dimensions de la remise (en pieds carrés)
Grand format (plus de 90 pi2)
Dimensions du remise (pi)
10 x 20
Espace de stationnement
Abri d'auto double
Famille de couleurs
Crème
Forme
Rectangulaire
Matériau de larmature
Acier
Options relatives au plancher
Sans plancher
Pays d'origine
US-United States
Résistance au vent maximale
61 - 120 km/h
Style de toit
Toit à pignon
Superficie (pi²)
200
Type de remise
Rangement

Garanties et certifications

Guarantie limitee de 15 ans
Commander Remise a usages multiples (10 Pi. x 20 Pi.)Arrow Commander Remise a usages multiples (10 Pi. x 20 Pi.)La remise utilitaire de jardin de 3,0 x 6.1 m / 10 x 20 pi vous offre avantage et espace. Cette ouverture extra grande à portes pivotantes accommode facilement les outils et équipements de grande taille. Idéal comme atelier ou centre de hobby!
Arrow
1000769710
CAD37292023-10-04
Home Depot Canada
Commander Remise a usages multiples (10 Pi. x 20 Pi.) est évalué 3.3 de 5 de 28.
  • y_2023, m_10, d_4, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_fr_CA, sid_1000769710, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 77ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Awesome. This isn't a cheap tin shed. It was a lot of work. 84 man hours. Get some help. If you are not good at interpreting and following directions, get a lot of help. Make sure that your base is level, or the building will tweak, and it will be hard to line up the holes. Common sense. The end result is well worth the effort. I think it is a great value for the buck. And it looks great. Would do it again. Recommended for those looking for a longer lasting quality shed.
Date de publication: 2014-05-20
Rated 2 de 5 de par way over priced 20 foot shed This shed takes 2 men 3 to 4 days to build--many of the holes didn't line up--your base must be perfectly level--it is made of a very weak metal--if you lean on it or your kids hit it with a ball, it dents--buy a wooden shed--it will last longer and be more secure
Date de publication: 2014-06-24
Rated 3 de 5 de par Nice Shed I had this delivered a month ago because of the dimensions posted on the website. However I could have saved myself $200.00 because it came in 4 boxes and would have fit in my 1/2 tonne. All the holes in the frame to secure the outside tin were too small for the Screws that came with the building so they ALL needed to be pre drilled bigger to fit the screws. We are used to carpentry and it still took us over 3 full weekends to assemble even though the floor was built and levelled before the shed showed up. Don't waste the $200 for delivery if your home depot is close and pre drill your holes to give you less grief.
Date de publication: 2018-11-19
Rated 5 de 5 de par Easy to assemble I needed a shed to enclose my well pump equipment but I decided to make it bigger. I chose the Arrow 10 x 20 foot shed. The instructions are clear and concise, amazingly accurate. Every hole lines up with a little help from an icepick. The hardware is lacking gripper nuts but a bent open end wrench and power screwdriver are helpful. A few days are needed to complete the shed. Time will tell how the shed holds up to the weather but I am pleased with the purchase.
Date de publication: 2014-04-08
Rated 3 de 5 de par Do not try to put this together without an awl, I am very thankful I saw that recommendation by a... Do not try to put this together without an awl, I am very thankful I saw that recommendation by another review. 25 hours to put together is a good estimate (I have 10' by 20'). The directions are relatively easy to follow, there are a few confusing issues, but it isn't that tough. The hardest part of the entire operation is putting together the trusses, believe it or not, screwing the screws into the pre drilled holes is very difficult (you can forget using a power drill) and left my hands in blisters. Worst part was that there were numerous parts missing. I had two key parts to one truss missing, plus a few other parts that I was able to replace with stuff I bought at Home Depot. This dropped my review significantly. Best part was the price, easily half the cost of similar sized sheds sold at Home Depot in the store. I put my shed on a concrete floor 4-6 inches thick. Probably the hardest part of the whole job.
Date de publication: 2017-02-22
Rated 3 de 5 de par What a pain to assembly Ok once assembled this building is nice so the three star rating is because of assembly. For the 10x20 their is 4 truss assembly's you must put together which each have 22 pieces each. This thing is like a large erector set and is a pain to put together. The hardware you get is cheap screws you get for the roof is small screws with plastic washers you must put on every screw. I opted not to install those in my roof because the plastic will crack over time in the sun and leak. I used self tapping sheet metal screws with rubber gaskets for a better seal. Pre drilled holes don't all line up so it makes it harder. One piece of advice I have is to ensure you are level and square during the whole assembly process. I would also consider the assembly time which took two of us 2 1/2 weekends and look at a wood model yes more expensive but would be so much easier to put together. And yes we both know about construction. The only way I would suggest this product is if you only bought the 10x10 because the larger you go like the one I bought the 10 x 20 you get two 5 foot expansion modules and the holes and extruded pieces are not exactly the same probably due to poor QA during manufacturing I hope this review informs you of what to expect with this building and if size vs cost is you main consern as it was for me than this may be for you just be prepared for some labor and irritation.
Date de publication: 2013-09-24
Rated 3 de 5 de par too exspensive for the quality Extremely tedious to put together. Very small screws and nuts, the metal is so thin and weak that if you lean against it you will dent it.
Date de publication: 2014-05-13
Rated 5 de 5 de par What a cool economical way to have a large shed. It took a little work, but well worth it. A much larger shed than we could have gotten in a wood shed for the price.
Date de publication: 2014-07-15
  • y_2023, m_10, d_4, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_fr_CA, sid_1000769710, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 54ms
  • REVIEWS, PRODUCT

Is the metal thick enough to wall mount let's say TVs, shelves?

Posée par: Ruben
I don’t think so.
Répondue par: Fan
Date de publication: 2023-05-06

Does the Commander 10ft X 20ft hot dipped galvanized steel shed come with a flooring kit?

Posée par: Kristina
No, no flooring or foundation is included with the Commander 10 ft. x 20 ft. Hot Dipped Galvanized Steel Shed.
Répondue par: Communityanswer
Date de publication: 2023-05-03

How long of a trailer do I need to pick up the 10x20 kit--is 8 feet enough???

Posée par: wildyank130
There are five boxes about six feet long and six inches thick, each weighing approx. 100 pounds. It all fit in my six foot pickup bed. Singlehanded and 73 years young, it took me about a week of five hour days to erect. I am pleased with the shed that I built as a barn for my grandkids chickens.
Répondue par: 56443
Date de publication: 2023-05-03

What tools do I need to assemble 10' x 20'

Posée par: Waterdawg
An awl, a phillips head screw driver, hammer, string, pliers, an 8 foot ladder, and you'll need at least two extra pair of hands for a couple of hours as you put the trusses together.
Répondue par: SW
Date de publication: 2023-05-04

If I order a shed, do I have to put it together or the company has someone to do it?

Posée par: Mont
You have to put it together.
Répondue par: Communityanswer
Date de publication: 2023-05-06

How many 80lb bags of concrete would I need to pour a pad for this shed?

Posée par: Ashley
Please review the owner's manual (link attached) as to base construction and preparation. The instructions here are for a 10 x 10' model. Larger bases would have to be extended in 5 foot increments, but the width would remain the same. For the best advice on exactly how much base (concrete) materials would be needed, please note the instructions for the base or print out the page with those instructions/specifications and take to the Home Depot lumber/contractor service desk for assistance in the amount of materials you will need for the mix. http://www.homedepot.com/catalog/pdfImages/ac/ac42cfab-de7a-4b3a-a354-26e06bec05cf.pdf
Répondue par: Ted
Date de publication: 2023-05-03

What are the recommended dimensions for building a wood floor for this model?

Posée par: GMAN
The recommended foundation size is 122 1/4" x 242 1/2" for the Commander 10X20.
Répondue par: Arrowsheds
Date de publication: 2023-05-03

Do you build the shed?

Posée par: NS
Wood
Répondue par: Ronald
Date de publication: 2023-05-06
  • y_2023, m_10, d_4, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_39
  • loc_fr_CA, sid_1000769710, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 73ms
  • QUESTIONS, PRODUCT