L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # EZ6565LVCRCC Internet # 1001301066

Voici la remise EZEE Shed de la gamme des produits d'entreposage Arrow une remise qui s'assemble en deux fois moins de temps. La remise EZEE Shed est fabriquée en acier galvanisé durable et faite pour durée. Elle comprend le système d'installation rapide Snap-IT qui réduit le temps d'assemblage de moitié comparé à la plupart des remises en acier sur le marché aujourd'hui. La remise EZEE Shed comprend un nombre réduit d'éléments de fixation pour les murs, le plafond et les portes et aucun raccordement de boulons et d'écrous difficiles à installer l'assemblage est donc plus facile et plus rapide que jamais! La remise EZEE Shed est non seulement la remise la plus solide et la plus rapide à assembler, mais elle offre aussi une finition plus moderne et plus attrayante que les autres remises extérieures! La remise EZEE Shed est offerte dans une palette de couleurs au goût du jour pour créer des solutions d'entreposage modernes et élégantes pour la cour arrière, le patio et les espaces de jardin. La remise EZEE Shed n'a pas seulement une apparence plus soignée; elle offre aussi un meilleur espace de rangement. La conception robuste et solide des jolies portes battantes de la remise EZEE Shed vous permet d'accéder plus facilement à vos équipements. Les portes sont installées sur trois charnières pour assurer une durabilité accrue. La remise EZEE Shed est une alternative solide et moderne aux remises de jardin conventionnelles et représente un avancée technique en terme d'assemblage et de conception des remises de jardin en acier.

  1. Remise en acier galvanisé EZEE 6 x 5 pi à toit bas Crème avec bordures Charcoal
  1. L'assemblage plus facile et amélioré grâce au système d'assemblage rapide Snap-IT : vous n'avez qu'à mettre les panneaux en place et à utiliser les rainures en acier pour les fixer les panneaux et les murs les uns aux autres
  1. Le système d'assemblage unique de la remise EZEE Shed fait en sorte que les panneaux se chevauchent à tous les 12 po, ce qui augmente à la fois l'épaisseur des murs et la solidité générale de l'unité
  1. Les nouvelles portes battantes offrent jusqu'à 33 % d'ouverture de plus en largeur, ce qui permet de ranger plus facilement que jamais les gros équipements encombrants.
  1. Procédé d'assemblage amélioré du toit, comparativement aux remises conventionnelles : assemblez le toit de votre remise au sol, ce qui permet de le fixer plus facilement et plus rapidement à la structure et aux murs de la remise par la suite
  1. Les bouches d'aération à même les pignons permettent une meilleure circulation de l'air et une régulation de la température à l'intérieur de votre abri en acier

Spécifications

Dimensions

Hauteur assemblé (en pouces)
72
Hauteur de l’emballage (en pouces)
6.8
Largeur assemblée (en pouces)
69.75
Largeur de l’emballage (en pouces)
16
Poids assemblé (en livres)
107
Poids de l’emballage (en livres)
107
Profondeur assemblé (en pouces)
62
Profondeur de l’emballage (en pouces)
74.88

Détails

Assemblage
Assemblage rapide
Charge de toit
0 à 10 lb/pi2
Dimensions de la remise (en pieds carrés)
Petit format (de 0 à 39 pi2)
Dimensions du remise (pi)
6 x 5
Dimensions populaires (pouces)
6 x 5
Espace de stationnement
Abri d'auto simple
Famille de couleurs
Crème
Forme
Rectangulaire
Matériau de larmature
Acier
Options relatives au plancher
Sans plancher
Pays d'origine
US-United States
Résistance au vent maximale
0 - 60 km/h
Style de toit
Toit à pignon
Superficie (pi²)
30
Type de remise
Rangement

Garanties et certifications

Limitée 12 Ans
Remise EZEE Shed à pignon bas, 6 pi x 5 pi, acier galvanisé, crème et garniture anthraciteArrow Remise EZEE Shed à pignon bas, 6 pi x 5 pi, acier galvanisé, crème et garniture anthraciteVoici la remise EZEE Shed de la gamme des produits d'entreposage Arrow une remise qui s'assemble en deux fois moins de temps. La remise EZEE Shed est fabriquée en acier galvanisé durable et faite pour durée. Elle comprend le système d'installation rapide Snap-IT qui réduit le temps d'assemblage de moitié comparé à la plupart des remises en acier sur le marché aujourd'hui. La remise EZEE Shed comprend un nombre réduit d'éléments de fixation pour les murs, le plafond et les portes et aucun raccordement de boulons et d'écrous difficiles à installer l'assemblage est donc plus facile et plus rapide que jamais! La remise EZEE Shed est non seulement la remise la plus solide et la plus rapide à assembler, mais elle offre aussi une finition plus moderne et plus attrayante que les autres remises extérieures! La remise EZEE Shed est offerte dans une palette de couleurs au goût du jour pour créer des solutions d'entreposage modernes et élégantes pour la cour arrière, le patio et les espaces de jardin. La remise EZEE Shed n'a pas seulement une apparence plus soignée; elle offre aussi un meilleur espace de rangement. La conception robuste et solide des jolies portes battantes de la remise EZEE Shed vous permet d'accéder plus facilement à vos équipements. Les portes sont installées sur trois charnières pour assurer une durabilité accrue. La remise EZEE Shed est une alternative solide et moderne aux remises de jardin conventionnelles et représente un avancée technique en terme d'assemblage et de conception des remises de jardin en acier.
Arrow
1001301066
CAD7792024-03-04
Home Depot Canada
Remise EZEE Shed à pignon bas, 6 pi x 5 pi, acier galvanisé, crème et garniture anthracite est évalué 2.8 de 5 de 157.
  • y_2024, m_3, d_3, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_7, tr_150
  • loc_fr_CA, sid_1001301066, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 72ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par Smaller then I thought This is a great sturdy cute shed... Actually sturdier than I would have thought for the price.. I would highly recommend for outside tools and a few extra items definitely not big enough for major items.. great for stacking snap containers on one another and extra equipment.. due to limited space I'm actually ordering another one so I can put them back to back and it's still cheaper than if I got one the size I needed but do not have the space where I placed it... I hope this was of some help.. I really do not believe you will be disappointed.. also one of the easiest sheds I've ever seen go up... GOOD LUCK
Date de publication: 2017-11-30
Rated 3 de 5 de par The snap together panels did not snap easily. I had to use construction adhesive to hold them to... The snap together panels did not snap easily. I had to use construction adhesive to hold them together. This was slow because I had to put the adhesive on snap together as best as possible and then put weights on the seams and wait for it to dry. Once all the panels were assembled the shed assembly went well and everything lined up well. Seems very sturdy now that it is all together. I would probably look for screw together panels if I were to do it again.
Date de publication: 2019-07-10
Rated 1 de 5 de par Updated review My previous review was 3 stars and stated- It took 4 of us to put it together but for the price, not a bad deal. This shed is cheap for a reason. Since I’ve bought it we’ve had 2 wind storms and both times I’ve went outside and found the shed collapsed. The first time it happened I put the shed back together and added 2x4s for support and used my own screws instead of the cheap ones that come with it . Just walked outside and it’s collapsed again . Unless you live in an area where the weather is always calm , don’t buy this shed .
Date de publication: 2019-01-19
Rated 5 de 5 de par I read a lot of reviews on here before purchasing and had some doubt, but I must say, this shed i... I read a lot of reviews on here before purchasing and had some doubt, but I must say, this shed is excellent. I read a lot of negative reviews about the screws and how they'd strip or thread would break. I didn't face any issues there (maybe it was a bad batch or they changed material specs to fix the issue. Just make sure you don't over tighten. The metal is very thin gauge and easy to strip. I was looking for a decent size shed at a low cost and this is about as low as I could find for the size. The panels snap together, pretty easily. There were a few cases where I needed needle nose pliers to slightly bend some metal tabs where they snap together (you can easily bend by hand since it's very thin). Once you see how the panels snap together you can see if the ends need a slight bend. No fault of the product itself, with this thickness of metal things bend very easily. Also, a few holes didn't line up perfectly when putting the frame together, a 5/64" drill bit easily made new holes. One improvement I found on assembly instructions is that the "frame" pieces that snap on to the top and bottom of the wall panels, can actually slide on instead of snapping on. I found it difficult to snap on, but you can slide them on and off much easier. I was able to put this together, by myself in about 4-5 hours. Multiple tables / people will make it go faster (you can make the wall sub-assemblies multiple at a time). The part that requires the most help is putting the 4 panels together. I did it myself, but could have used help there. Once that is done, the rest is pretty easy. Roof panels are light and easy to put on solo. Also, 2 of us moved the shed to it's final location after assembly. It's ~100 lbs so not too bad to move by lifting the roof from inside. As for tools, all I needed was a step ladder (or something to stand on), battery drill (for drilling a few extra holes and installing the screws), and a socket wrench. That was it. Be sure to wear gloves since the metal is thin, I'd think it would cut skin easily.
Date de publication: 2018-09-24
Rated 2 de 5 de par I've purchased and assembled 4-5 arrow sheds in the last few years for customers. This is the fir... I've purchased and assembled 4-5 arrow sheds in the last few years for customers. This is the first time using one with the "snap-it quick assembly". I was not impressed with the shed and prefer to assemble the older style with the extra screws/washers. I spent more time re-assembling walls and adjusting the snap-it areas due to them not staying together well while adding other walls. Overall, not happy with the product. Once it was assembled, I used adhesive in corners to re-enforce the strength. It will serve the purpose my customer wanted but I will look for a different type in the future.
Date de publication: 2020-04-07
Rated 3 de 5 de par Arrow Sheads Be very careful dont even open the box until you have tape and a marker the nubers for the items that you are supposed to mach up with picture directishions need to be labled because they come off very easly .Condinsaion in the air makes them go away making it almost imposabe to put together .Have a helper read off the nubers you marked then assembel placing each section in a clear spot .This will make things alot more easly when building.
Date de publication: 2019-04-16
Rated 4 de 5 de par I am rating purely on finished product. This shed looks nice once completed. However, if I was ba... I am rating purely on finished product. This shed looks nice once completed. However, if I was basing my review of this product on ease of putting it together I would describe it as a nightmare with zero stars. It took two days to construct. There are no written instructions only slightly discernible pictures. Luckily on the second day of putting the shed together, I read a comment that said the numbers would wipe off. So before the numbers had completely disappeared I wrote on the back of the panels with permanent marker. This was very useful when the dew set in. I also learned after putting the guide rail on wrong that instead of tilting the guide rail onto the panels it could slide on, this would have been a great time saver. Also, the support on the back of the door kept catching so I drimmeled a small piece of the door frame to allow the door to open properly as this imperfection would have ultimately weakened the integrity of the shed. I had to take the roof off three times because the directions did not say which side the little holes on the panel should be facing, and because the screw holes didn't line up without some pulling of other panels I thought I had it wrong, only I discovered I had it right the first time. My suggestion would be use gloves and only put this shed together when you have a lot of time and patience.
Date de publication: 2018-10-30
Rated 5 de 5 de par I read a lot of reviews on here before purchasing and had some doubt, but I must say, this shed i... I read a lot of reviews on here before purchasing and had some doubt, but I must say, this shed is excellent. I read a lot of negative reviews about the screws and how they'd strip or thread would break. I didn't face any issues there (maybe it was a bad batch or they changed material specs to fix the issue. Just make sure you don't over tighten. The metal is very thin gauge and easy to strip. I was looking for a decent size shed at a low cost and this is about as low as I could find for the size. The panels snap together, pretty easily. There were a few cases where I needed needle nose pliers to slightly bend some metal tabs where they snap together (you can easily bend by hand since it's very thin). Once you see how the panels snap together you can see if the ends need a slight bend. No fault of the product itself, with this thickness of metal things bend very easily. Also, a few holes didn't line up perfectly when putting the frame together, a 5/64" drill bit easily made new holes. One improvement I found on assembly instructions is that the "frame" pieces that snap on to the top and bottom of the wall panels, can actually slide on instead of snapping on. I found it difficult to snap on, but you can slide them on and off much easier. I was able to put this together, by myself in about 4-5 hours. Multiple tables / people will make it go faster (you can make the wall sub-assemblies multiple at a time). The part that requires the most help is putting the 4 panels together. I did it myself, but could have used help there. Once that is done, the rest is pretty easy. Roof panels are light and easy to put on solo. Also, 2 of us moved the shed to it's final location after assembly. It's ~100 lbs so not too bad to move by lifting the roof from inside. As for tools, all I needed was a step ladder (or something to stand on), battery drill (for drilling a few extra holes and installing the screws), and a socket wrench. That was it. Be sure to wear gloves since the metal is thin, I'd think it would cut skin easily.
Date de publication: 2018-09-24
  • y_2024, m_3, d_3, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_7, tr_150
  • loc_fr_CA, sid_1001301066, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 23ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 67ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;