Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

Avanti Pro 10 pouces x 60 carbure de dent incliné mitre finition fine / lame de scie de table pour la coupe du bois

Modèle nº PC1060X|Nº UGS 1000710896

Choisissez vos options

Aperçu

Modèle # PC1060X Internet # 1000710896

Faites des coupes propres dans le bois franc, le bois résineux, le contreplaqué et les panneaux de fibres de densité moyenne (MDF) avec la lame de scie à finition fine AvantiPRO de 10 po x 60 dents. Il a été conçu spécifiquement pour les entrepreneurs professionnels. Il a un bord mince de kerf et un revêtement de jante de frottement-réduction pour résister à la fixation et à la traînée. Le renfort durable en carbure prolonge la durée de vie de la lame.

  1. Idéal pour les entrepreneurs professionnels
  1. Idéal pour le bois franc, le résineux, le contreplaqué et le MDF
  1. Fait d'acier de haute qualité avec renfort en carbure pour plus de durabilité
  1. Conception mince de kerf pour l'exécution améliorée de découpage
  1. Revêtement de jante spécial pour une fixation et une traînée réduites

Spécifications

Dimensions

Hauteur assemblé (en pouces)
12
Hauteur de l’emballage (en pouces)
14
Largeur assemblée (en pouces)
14
Largeur de l’emballage (en pouces)
12
Poids assemblé (en livres)
1.90
Poids de l’emballage (en livres)
1.8
Profondeur assemblé (en pouces)
0.25
Profondeur de l’emballage (en pouces)
0.25

Détails

Appareils recommandés
Scie circulaire
Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Roues
Diamètre de la lame
10
Fini
Finition fine
Idéalement utilisé avec
Scies circulaires
Matériau de la lame
Carbure
Matériau de la pointe
Carbure
Nombre de dents
60
Nombre de pièces dans l'ensemble
1
Pays d'origine
CN-China
Taille de larbre (en po)
5/8
Type d'accessoire pour outils à moteur
Lames pour scies circulaires
Utilisation
Bois
Épaisseur de la lame (en po)
0.25

Garanties et certifications

Ce produit porte une garantie de retour de 60 jours. Veuillez nous contacter au 1-800-263-7016 ou à l'adresse canadasupport@freudtools.com si vous avez des questions ou si vous souhaitez obtenir des informations supplémentaires.
10 pouces x 60 carbure de dent incliné mitre finition fine / lame de scie de table pour la coupe du boisAvanti Pro 10 pouces x 60 carbure de dent incliné mitre finition fine / lame de scie de table pour la coupe du boisFaites des coupes propres dans le bois franc, le bois résineux, le contreplaqué et les panneaux de fibres de densité moyenne (MDF) avec la lame de scie à finition fine AvantiPRO de 10 po x 60 dents. Il a été conçu spécifiquement pour les entrepreneurs professionnels. Il a un bord mince de kerf et un revêtement de jante de frottement-réduction pour résister à la fixation et à la traînée. Le renfort durable en carbure prolonge la durée de vie de la lame.
Avanti Pro
1000710896
CAD34.982022-09-25
Home Depot Canada
10 pouces x 60 carbure de dent incliné mitre finition fine / lame de scie de table pour la coupe du bois est évalué 4.2 de 5 de 186.
  • y_2022, m_9, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_59, tr_127
  • loc_fr_CA, sid_1000710896, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 201ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Great blade, even better value! I've had this blade in my saw for 3 months, I use it every working day as a carpenter. I originally bought these as a band-aid while waiting for my Diablo's to be sharpened. I haven't had a reason to take this out of the saw yet. I"ve cut just about everything with it, baseboard, solid maple crown moulding, melamine, plywood - everything basically. I always get very good clean straight cuts. The blade runs true and doesn't deflect or bog down while cutting. After 3 months and thousands of cuts later I'm still on the first blade. It always help to clean the pitch off the blades every so often to keep it sharper longer.
Date de publication: 2016-10-29
Rated 4 de 5 de par Good for casual cutting. I certainly would not buy this blade if I were a pro, I would spend the extra money to get a more rugged and known brand / model. This blade, however, is great for the DIY and handy-person type work. I certainly cuts better than the dull blade I replaced. It was straight (no wobbling), sharp, and a good direct replacement 10" blade. It has already started showing wear and will not hold its edge as long as a pro would like. I did two medium sized decks and cuts are getting slower and sloppier. Not BAD, just that the sharpness is starting to wane. If money is no problem - get a better blade. If you're on a budget or don't do a lot of cuts, this blade will work well for you.
Date de publication: 2020-07-29
Rated 1 de 5 de par Not good for laminate Bought this to rip a few laminate blades. The 140 teeth count seemed good as the experts say the more teeth the better when cutting laminate flooring. I got half way through the first the first plank with difficulty. The saw was jamming and the laminate was burning. Pulled the saw out and never used the blade. It was new first time using it. Very disappointed. I ended up using a jigsaw with laminate blades and worked like a charm. Don't buy this as a cheap alternative to expensive laminate blades you can use for a project and throw away. You won't get past the first plank.
Date de publication: 2017-10-10
Rated 5 de 5 de par Great saw blade I wasn't expecting such a smooth cut from a 40 tooth avanti blade but this saw blade really surprised me. Smooth rips through solid oak flooring. Cut through melamine, and painted mdf without any chips or tears. Mind you, I did run it through the saw at a slower speed but it did a fantastic job. Did such a great job on my table saw, decided to get a 12" 80 tooth for my mitre saw. Avanti Pro's are giving my diablos a real run for their money. I've only been running them in my saws for a month so I can't comment on longevity. If I get 3-4 months out of each and at least 1 resharpen I'll be very happy.
Date de publication: 2016-07-12
Rated 1 de 5 de par Very Poor Cut Sorry, I probably received the only bad blade ever made. I put this blade into my compound miter saw, tried to cut a piece of 1/2" plywood.....the blade shredded it. I checked the installation by removing it and reinstalling it to make sure there wasn't anything wrong. Tried another cut...shredded again. Removed the blade and replaced my old blade, made a cut and the cut was smooth and straight. Being totally confused after reading all the other reviews, I installed the blade in my table saw, tried to cut a 1/2" piece of plywood, and the same results....shredded the wood. Replaced my old blade and it cut smooth and straight. I'm sure that my case is an isolated defective blade, but based on my experience, I can't recommend it.
Date de publication: 2012-06-04
Rated 3 de 5 de par Poor Plywood Cutting Bought this today. Did 2 test cuts on cabinet grade plywood. Tear out was awful. Unusable for cutting plywood. Probably ok for fir, cedar and other softwoods. Do not recommend for good plywood.
Date de publication: 2020-08-04
Rated 5 de 5 de par Great product and value I originally purchased a 150 tooth blade thinking it would be great to make nice precise cuts for a laminate floor and molding and my 40 teeth that came with the miter had done it's time cutting 2x4s but it was a disaster. After talking with the HD guy he suggested 60 teeth would be better for this aplication so I purchased this value pack to replace both my table saw and miter saw. The blades cut through the laminate floor like butter. I'm very impressed with the quality of this pro version. I had not even realized that this is the same company that makes Diablo, just middle of the road, which is perfect for me. Also I saw a review saying it does not fit Ryobi. My miter saw is a Ryobi and at first I had the same impression as it seems that the bolt did not go all the way through the hole of the blade. Knowing this was next to impossible I measured both old and new and they are exactly the same. Simply rotating the blade an inch one way or the other and it goes in perfectly and everything works fine. This value pack is really worth it because even if Diablo last a little longer, you're getting two so you'll do a lot more mileage and in my case was able to replace two for the price of one.
Date de publication: 2018-01-04
Rated 4 de 5 de par Worth the money An excellent set of blades but the arbour bore seemed too precise, even +/- 0.0001 would have been good. The bore measured 5/8” exactly on a vernier, I love precision but don’t like feeling like I may be deforming the blade or the arbour bolt when the tightening of the arbour nut is the only way for me to push the blade on. I love these blades and all three qualities that this company offers, you can’t go wrong with them. Clear when needed and they work super hard before they need to be sharpened.
Date de publication: 2020-07-30
  • y_2022, m_9, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_59, tr_127
  • loc_fr_CA, sid_1000710896, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 50ms
  • REVIEWS, PRODUCT

What is the kerf? Is it standard or narrow?

What is the kerf? Is it standard or narrow?
Posée par: Bud
Standard
Répondue par: chilly
Date de publication: 2018-05-15

Is this the correct blade to use in a miter saw to cut trim?

Posée par: slv44
Yes , That is what I bought it for. the cut on oak trim was smooth
Répondue par: Rick
Date de publication: 2022-09-05

How are these for cutting 3/16 Lexan and acrylic?

Posée par: Staniloo
Great nice clean cut just use zero clearance throat plate for you table saw 
Répondue par: Picman
Date de publication: 2022-05-11

ok so what is it, 5000 rpm or 6000 rpm max revs? How can anyone trust a company that can't even check if the writing on their product is correct or well translated. Sorry can't buy this product.

Posée par: jack
6000 rpms max is what is written on the packaging. (I believe it's the same company as the Diablo saw blades which are their higher quality ones that cost a fair bit more.) I bought these blades in Jan of 2018 and would say the quality is decent. I still have the first blade (of two in the package) on my table saw and expect it will continue to serve me well.
Répondue par: blah blah
Date de publication: 2020-08-08

Can this blade be sharpened?

Posée par: doop
yes I used to get them sharpened but now I watch for them to go on sale for 40.00 per pack...it cost 25.00 to sharpen one blade
Répondue par: Willy
Date de publication: 2022-01-08

can this blade be used on a dewalt miter saw?

can this blade be used on a dewalt miter saw?
Posée par: Sean
Yes, this can be used on a Dewalt miter saw.
Répondue par: Communityanswer
Date de publication: 2020-03-24

Where are these blades made?? China or US

Posée par: Burklie
The blades are made in China
Répondue par: The Home Depot Canada
Date de publication: 2018-04-23
  • y_2022, m_9, d_24, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_fr_CA, sid_1000710896, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 154ms
  • QUESTIONS, PRODUCT