Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

Avanti Pro Lame de scie à onglets fines à pointe en carbure de dents de 10 po x 60 po/lame de scie à table pour la coupe du bois (2 paquets)

Modèle nº PC106060PP|Nº UGS 1000712441

Choisissez vos options

Aperçu

Modèle # PC106060PP Internet # 1000712441

Créez des coupes fines et lisses dans une variété de types de bois avec ces lames de scie à finition fine AvantiPRO de 10 po x 60 dents (paquet de 2). Les lames sont fabriquées en carbure pour une durabilité exceptionnelle et des performances de coupe à long terme. L'ensemble de 2 est bien adapté pour une utilisation sur le contreplaqué, le bois franc, le bois résineux, les moulures et les MDF.

  1. Le matériel de carbure assure la longue vie de lame
  1. 60 dents créent des coupes fines et lisses
  1. Conçu pour s'adapter aux tonnelles de 5/8 po
  1. Coupe le contreplaqué, le bois franc, le bois résineux, les moulures et les MDF
  1. Le revêtement spécial de jante aide à réduire la liaison et la traînée
  1. L'ensemble comprend 2 lames de scie
  1. Non recommandé pour une utilisation supérieure à 7000 tr/min

Spécifications

Dimensions

Hauteur assemblé (en pouces)
14.50
Hauteur de l’emballage (en pouces)
14.5
Largeur assemblée (en pouces)
11
Largeur de l’emballage (en pouces)
11.25
Poids assemblé (en livres)
3.40
Poids de l’emballage (en livres)
3.42
Profondeur assemblé (en pouces)
0.25
Profondeur de l’emballage (en pouces)
0.38

Détails

Appareils recommandés
Scie circulaire
Article individuel, Ensemble
Ensemble
Caractéristiques des accessoires pour outils à moteur
Roues
Diamètre de la lame
10
Fini
Finition fine
Idéalement utilisé avec
Scies circulaires
Matériau de la lame
Carbure
Matériau de la pointe
Carbure
Nombre de dents
60
Nombre de pièces dans l'ensemble
2
Pays d'origine
CN-China
Taille de larbre (en po)
5/8
Type d'accessoire pour outils à moteur
Lames pour scies circulaires
Utilisation
Bois
Épaisseur de la lame (en po)
0.38

Garanties et certifications

Ce produit porte une garantie de retour de 60 jours. Veuillez nous contacter au 1-800-263-7016 ou à l'adresse canadasupport@freudtools.com si vous avez des questions ou si vous souhaitez obtenir des informations supplémentaires.
Lame de scie à onglets fines à pointe en carbure de dents de 10 po x 60 po/lame de scie à table pour la coupe du bois (2 paquets)Avanti Pro Lame de scie à onglets fines à pointe en carbure de dents de 10 po x 60 po/lame de scie à table pour la coupe du bois (2 paquets)Créez des coupes fines et lisses dans une variété de types de bois avec ces lames de scie à finition fine AvantiPRO de 10 po x 60 dents (paquet de 2). Les lames sont fabriquées en carbure pour une durabilité exceptionnelle et des performances de coupe à long terme. L'ensemble de 2 est bien adapté pour une utilisation sur le contreplaqué, le bois franc, le bois résineux, les moulures et les MDF.
Avanti Pro
1000712441
CAD54.982022-09-24
Home Depot Canada
Lame de scie à onglets fines à pointe en carbure de dents de 10 po x 60 po/lame de scie à table pour la coupe du bois (2 paquets) est évalué 4.3 de 5 de 1032.
  • y_2022, m_9, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_131, tr_901
  • loc_fr_CA, sid_1000712441, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 75ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Great blade, even better value! I've had this blade in my saw for 3 months, I use it every working day as a carpenter. I originally bought these as a band-aid while waiting for my Diablo's to be sharpened. I haven't had a reason to take this out of the saw yet. I"ve cut just about everything with it, baseboard, solid maple crown moulding, melamine, plywood - everything basically. I always get very good clean straight cuts. The blade runs true and doesn't deflect or bog down while cutting. After 3 months and thousands of cuts later I'm still on the first blade. It always help to clean the pitch off the blades every so often to keep it sharper longer.
Date de publication: 2016-10-29
Rated 5 de 5 de par I'm floor installer this pack of deal comes great for me and they last a long time . we have try ... I'm floor installer this pack of deal comes great for me and they last a long time . we have try different brands but can't hold up to the task like these. having 60-tooth give us a much smooth cut for a good price. i like that is easy to install and have the the arrows to sow you which way the blade sold face. we have been using them since 2013 when a friend recommended them. for the price and the tooth and the durability it exceeds my expectations and we use these for commercial every day use . for a normal use it will last you a long time.
Date de publication: 2016-11-12
Rated 4 de 5 de par Good for casual cutting. I certainly would not buy this blade if I were a pro, I would spend the extra money to get a more rugged and known brand / model. This blade, however, is great for the DIY and handy-person type work. I certainly cuts better than the dull blade I replaced. It was straight (no wobbling), sharp, and a good direct replacement 10" blade. It has already started showing wear and will not hold its edge as long as a pro would like. I did two medium sized decks and cuts are getting slower and sloppier. Not BAD, just that the sharpness is starting to wane. If money is no problem - get a better blade. If you're on a budget or don't do a lot of cuts, this blade will work well for you.
Date de publication: 2020-07-29
Rated 1 de 5 de par Not good for laminate Bought this to rip a few laminate blades. The 140 teeth count seemed good as the experts say the more teeth the better when cutting laminate flooring. I got half way through the first the first plank with difficulty. The saw was jamming and the laminate was burning. Pulled the saw out and never used the blade. It was new first time using it. Very disappointed. I ended up using a jigsaw with laminate blades and worked like a charm. Don't buy this as a cheap alternative to expensive laminate blades you can use for a project and throw away. You won't get past the first plank.
Date de publication: 2017-10-10
Rated 5 de 5 de par Great saw blade I wasn't expecting such a smooth cut from a 40 tooth avanti blade but this saw blade really surprised me. Smooth rips through solid oak flooring. Cut through melamine, and painted mdf without any chips or tears. Mind you, I did run it through the saw at a slower speed but it did a fantastic job. Did such a great job on my table saw, decided to get a 12" 80 tooth for my mitre saw. Avanti Pro's are giving my diablos a real run for their money. I've only been running them in my saws for a month so I can't comment on longevity. If I get 3-4 months out of each and at least 1 resharpen I'll be very happy.
Date de publication: 2016-07-12
Rated 1 de 5 de par So I bought a pair of these in 12 inch for my chop saw. I needed a 10 inch for my table saw. Kno... So I bought a pair of these in 12 inch for my chop saw. I needed a 10 inch for my table saw. Knowing how well the 12 inch sat around in the package I decided to buy a pair of 10 inch blades. Put it on and went to cut a important door jamb cut and it cut horrible, and upon looking at the 80 inch cut it was incredibly crooked... how does this happen on a table saw? Put on my old blade and every thing was back to good. Turns out that when the blade was manufactured the cut height of the carbide tip (left and right) were different. Easy to see when looking at the blade after one cut only half of the carbide tips had paint removed the others were half, which lead to a terrible binding ordeal.
Date de publication: 2020-03-16
Rated 5 de 5 de par Two blades for half the price of one of the 60T red ones! Made in China vs. Italy. I am a DIYer... Two blades for half the price of one of the 60T red ones! Made in China vs. Italy. I am a DIYer who installs laminate, frames walls, and makes hardwood spice racks, etc. for my family. This blade is on my miter chop saw. It cuts like a hot knife blah, blah, blah.... Here is a tip for cutting laminate: Laminate will dull a blade quickly if you cut with the laminate side up (70 -100 cuts). If you cut with the laminate side down, the blade will remain sharp much longer. However only do this on cuts that will be covered by floor molding as there will be slight chipping of the laminate. Since almost all cuts ARE covered, conserve your blades by cutting laminate this way.
Date de publication: 2017-11-13
Rated 3 de 5 de par Decent for the price These blades are perfect for general use like rough cutting lumber or wood that won't be seen on the finished project. The cut quality is not as good as a Diablo blade but at $10-$15 per blade it's hard to compare. One super annoying problem with these blades is the blue paint color. It will rub off on your workpiece until it gets worn down. I was making test cuts on a 2x4 and it took a good 20-30 cuts before the blue had mostly gone away. I still have blue marks occasionally that need to be sanded off. Diablo blades are worth every penny but there is no point in spending the extra cash for cutting building materials. If your intention is to use this blade for woodworking I think you would be better served with the Diablo blade.
Date de publication: 2020-04-07
  • y_2022, m_9, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_131, tr_901
  • loc_fr_CA, sid_1000712441, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 24ms
  • REVIEWS, PRODUCT

What's the thickness of these blades please? Is it a fine thin kerf or "standard"

What's the thickness of these blades please? Is it a fine thin kerf or "standard"
Posée par: Windguy
Cross Reference the model number P1060X: Circular Saw Blade, Primary Saw Application Wood, Tip Material Carbide, Blade Type Wood Cutting, Blade Dia. 10 In., Number of Teeth 60, Arbor Hole 5/8 In., Kerf 0.095 In., Diamond Knockout No, Tooth Grind ATB, Hook Angle 7.0 Degrees , Max. RPM 7000, Plate Thickness 0.071 In., Application For Wood Cutting, For Use With Circular and
Répondue par: caa60126
Date de publication: 2021-02-27

Can this blade be used for cutting laminate flooring?

Can this blade be used for cutting laminate flooring?
Posée par: BDavis
yes I used it for this purpose and it did a beautiful job
Répondue par: red 54
Date de publication: 2021-01-04

Can I cut laminate with this blades?

Posée par: Ceso
Yes you can. Here is a tip for cutting laminate: Laminate will dull a blade quickly if you cut with the laminate side up (70 -100 cuts). If you cut with the laminate side down, the blade will remain sharp much longer. However only do this on cuts that will be covered by floor molding as there will be slight chipping of the laminate. Since almost all cuts ARE covered, conserve your blades by cutting laminate this way.
Répondue par: Frumious
Date de publication: 2019-11-29

Looking for a blade to use in a radial arm saw. Anyone know the hook angle on these?

Posée par: Tim
Cross Reference the model P1060X: Circular Saw Blade, Primary Saw Application Wood, Tip Material Carbide, Blade Type Wood Cutting, Blade Dia. 10 In., Number of Teeth 60, Arbor Hole 5/8 In., Kerf 0.095 In., Diamond Knockout No, Tooth Grind ATB, Hook Angle 7.0 Degrees , Max. RPM 7000, Plate Thickness 0.071 In., Application For Wood Cutting, For Use With Circular and
Répondue par: caa60126
Date de publication: 2019-11-29

bought this two pack at salem,nh. home depot. has the same number p1060x which is supposed to be ...

bought this two pack at salem,nh. home depot. has the same number p1060x which is supposed to be rated for 7000 rpms. my blade set is rated 6000 rpms and has the same number as this set of blades. why?
Posée par: fred
Your answer has two parts. First, the rated speed of the blade is for safety concerns. A blade running faster than its rated speed may vibrate, heat up, warp and eventually damage your saw. The amount of teeth on 7,000 or 6,000 rpm blades does not matter. The amount of teeth on a ten-inch blade or amount on a 7 1/4 inch blade determine how smooth your cut will be.
Répondue par: TxJhawk
Date de publication: 2017-12-12

Could someone please measure the hook angle? Or product rep give some specs on kerf thickness and...

Could someone please measure the hook angle? Or product rep give some specs on kerf thickness and hook angle?????
Posée par: caa60126
Cross Reference the model number P1060X: Circular Saw Blade, Primary Saw Application Wood, Tip Material Carbide, Blade Type Wood Cutting, Blade Dia. 10 In., Number of Teeth 60, Arbor Hole 5/8 In., Kerf 0.095 In., Diamond Knockout No, Tooth Grind ATB, Hook Angle 7.0 Degrees , Max. RPM 7000, Plate Thickness 0.071 In., Application: For Wood Cutting
Répondue par: caa60126
Date de publication: 2021-11-26

Is this a combination blade or a box joint blade?

Is this a combination blade or a box joint blade?
Posée par: Morgan
It's not a box blade. It's more of a finishing blade. Too many teeth for a combination blade. I use a 40 tooth for combination.
Répondue par: Gunman40
Date de publication: 2020-11-20

Can this blade be used to cut aluminum? Specifically, cutting 1 inch tall gallery rail.

Can this blade be used to cut aluminum? Specifically, cutting 1 inch tall gallery rail.
Posée par: HJ
That’s not what these are designed for. These are for woods, plastics, & etc.. What you are wanting is more of a “Cut off blade” as they are designed specifically to cut metals and these types of materials.
Répondue par: DonN
Date de publication: 2018-09-27
  • y_2022, m_9, d_23, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_fr_CA, sid_1000712441, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 73ms
  • QUESTIONS, PRODUCT