• Panier
  • NOS PRIX SONT IMBATTABLES NOUS LE GARANTISSONS.Certaines conditions s’appliquent

    BE Pressure Laveuse à Pression de 3200 PSI (eau froide)

    Modèle nº BE3265HA|Nº UGS 1000745098

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # BE3265HA Internet # 1000745098

    Cette laveuse à pression est idéale pour nettoyer les entrées, lextérieur des édifices, les enclos danimaux, les parcs de stationnement et pour préparer les surfaces pour vos travaux de peintures. Elle inclus 4 buses à connexion rapide pour vous permettre de choisir langle adéquat du jet selon le travail de nettoyage prévu. Elle possède également un injecteur de produits chimiques pour permettre un nettoyage au savon. Vous pouvez nettoyer jusquà 270 pieds carré en moins de 15 minutes de travail avec cette laveuse à pression à eau froide. Cette machine fonctionne à l'aide dun moteur à essence Honda GX200 et d'une pompe industrielle triplex, et comprends un tuyau à haute pression de 25' & un pistolet de pulvérisation.

    1. Pression maximum de 3200 PSI, Débit maximum de 2.8 GPM
    1. Nettoie 270 pieds carré en 15 minutes
    1. Fonctionne grâce à un moteur à essence industriel Honda GX200, avec témoins d'huile afin de prévenir des bris au moteur
    1. Pompe industrielle triplex est une pompe à grand débit de 2.8 GPM qui maximise le nettoyage. Fonctionnalités incluent une tête en laiton durable, des pistons en céramique, témoin d'huile, dispositif de marche à vide ajustable, et un filtre à eau transpare
    1. Inclus les buses à connexion rapide de 0°, 15°, 40° et la buse à savon pour satisfaire une variété de projets.
    1. Inclus un tuyau à haute pression en acier tressé de 25 pieds, des buses à connexion rapide. Le tuyau est résistant aux flammes et aux nœuds. Inclus un pistolet de pulvérisation industriel et un injecteur chimique fixe.

    Spécifications

    Dimensions

    Hauteur assemblé
    24
    Hauteur de l’emballage (en pouces)
    25
    Largeur assemblée
    22
    Largeur de l’emballage (en pouces)
    23.5
    Poids assemblé
    91
    Poids de l’emballage (en livres)
    92
    Profondeur assemblé
    22
    Profondeur de l’emballage (en pouces)
    23.5

    Détails

    Fabrication du moteur
    Honda
    Longueur du tuyau darrosage (en pieds)
    25
    Pays d'origine
    CA-Canada
    Pression maximale (en livres par pouce carré)
    3200
    Puissance (HP)
    6.5
    Type dalimentation
    Essence
    Type de pompe
    Triple
    Usage
    Commercial

    Garanties et certifications

    Ce produit est garantie sous un usage normal; non-commercial. 3 ans de garantie sur la pompe et 90 jours sur les autres pièces. Contactez le 1-866-850-6662 afin de vous renseignez sur la garantie complète.
    Laveuse à Pression de 3200 PSI (eau froide)Photo of productCette laveuse à pression est idéale pour nettoyer les entrées, lextérieur des édifices, les enclos danimaux, les parcs de stationnement et pour préparer les surfaces pour vos travaux de peintures. Elle inclus 4 buses à connexion rapide pour vous permettre de choisir langle adéquat du jet selon le travail de nettoyage prévu. Elle possède également un injecteur de produits chimiques pour permettre un nettoyage au savon. Vous pouvez nettoyer jusquà 270 pieds carré en moins de 15 minutes de travail avec cette laveuse à pression à eau froide. Cette machine fonctionne à l'aide dun moteur à essence Honda GX200 et d'une pompe industrielle triplex, et comprends un tuyau à haute pression de 25' & un pistolet de pulvérisation.
    BE Pressure
    1000745098
    CAD748
    The Home Depot Canada
    Laveuse à Pression de 3200 PSI (eau froide) est évalué 4.0 de 5 de 29.
    • y_2019, m_12, d_12, h_1
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_7, tr_22
    • loc_fr_CA, sid_1000745098, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 63ms
    • REVIEWS, PRODUCT
    Rated 4 de 5 de par Nearly Perfect For The Price I purchased this unit today after a few hours researching comparable units with Honda GC/GX horizontal drive pumps. For the price you pay, this unit is well built, simple and should prove to be very reliable. I put a couple of hours on it this afternoon and overall don't regret the purchase. The engine started after a couple of pulls and the adjustable throttle and choke are nice features to have. The engine is surprisingly quiet, infact the unit isn't as noisy as the Honda GCV160 powered vertical shaft unit it is replacing. My only complaints are that the wand is somewhat cheap bends easily, doesn't fit into the wand holder as I expect it was intended to and the hose is quiet short. You can put a slight bend in the upper wand rest and it'll stay put though. Additionally the wheels seem pretty cheap but they may hold up fine. Otherwise the hose appears to be of excellent quality and resists kinks well, and wraps up easily when done. It's compatible to a quality rubber air compressor hose. Unlike previous reviews, this unit came with the correct quick release fittings on both ends. Purchased Oct 2019 for reference. I nicer wand for a $750 dollar pressure washer would make this a 5 star. Seems this unit is custom for the HD market so it's possibly the wand was replaced with a different model to meet pricing criteria and therefore doesn't fit well in the standard frame. Not sure what is going on there as it seems to be a common complaint in the reviews. Overall a good product.
    Date de publication: 2019-10-03
    Rated 2 de 5 de par Conseption à revoir (Très frustrant, manque de sup Je suis déçu de ce produit que j'ai acheté en ligne, lors de la réception du produit j'ai tout de suite remarqué un problème car la conception de la laveuse ne permet pas de vérifier le niveau d'huile du moteur. J'ai été chez clinique de l'outillage MP à Québec et eux ne peuvent pas m'aidez car c'est un problème de conception ???
    Date de publication: 2019-08-22
    Rated 4 de 5 de par Good unit Good, solid machine. Would have given a five but the wand doesn't fit properly into the receiver on the frame. Not a big deal and an easy fix for the manufacturer.
    Date de publication: 2019-07-15
    Rated 4 de 5 de par Seems to be rock solid. So far this pressure washer has been flawless. It's a huge contrast to the last time I bought one. We bought a Generac and ended up returning it because the motor was awful. It leaked oil and ended up spewing oil into the air filter and wouldn't run. This one, by contrast, has a Honda motor on it and has worked perfectly since we got it. It arrived nicely packaged and undamaged and has done everything I've needed it to. BE Commercial was recommended to me by a friend who also had a bad Generac. The key here seems to be that it's a very simple machine with high quality components. It's a Honda motor and some well-known brand pump and a frame and not much else. I'd give it 5 stars but there's a couple of shortcomings in the simplicity that could be addressed. Firstly, I haven't found a way to empty the soap tank or to siphon from an external container so following the directions that say to rinse it out with clean water after using it is an issue. Secondly, the Generac did have a very nice wand with a dial on it to regulate the pressure. I'd buy one of those on its own if I could find it for sale separate from their units. This one is just a basic wand which works perfectly fine but knowing it could be better knocks the rating a little.
    Date de publication: 2019-07-11
    Rated 5 de 5 de par For those who don't like reading the manual Some work could go into the 'Quick Start' part: 1. Get yourself a garden house shut-off coupler (Home Depot - Model # 91707|Store SKU # 1000121282. $10ish ), THEN attach hose to the pump intake. 2. Make it large and clear in this section - 'Remove the black SOAP fitting when done with 'soap', then, spray for two minutes using any OTHER fitting in order to clear soap residue from pump and hose.' 3. Check - how much should your soap agent be diluted? Most are sold as a Concentrate Otherwise, it's a great rig. ENJOY!
    Date de publication: 2019-06-28
    Rated 4 de 5 de par Great pressure washer Just bought this and despite a few issues this pressure washer worked great right out of the box. Moving up from a Briggs & Stratton 2550PSI 2.4 gph pressure washer and there is little to compare. This has noticeably more pressure and volume of water than my old one. The Honda motor started easily and shows no strain to run the pump. The biggest complaint I have is the engine oil level / fill plug can not be removed without loosening off the engine mounting bolts to gain enough space between the cap and the frame of the washer(see pictures). There needs to be about 1/4" of space between the bottom of the motor and the base plate to get the oil cap out just so you can check the oil, not looking forward to this constant requirement. I might make a spacer plate to alleviate this loosening off of the mounting bolts. The next issue someone else has mentioned is the owner's manual states the pressure hose should have quick connect couplings on both ends, sadly it does not. Only one end has the quick connect and the other is threaded right to pressure wand handle. On the plus side this fitting on the handle is a swivel fitting so I will count this as a trade straight across. BE needs to update the owners manual to reflect this change if this is the norm. I found another issue with the owner's manual and the sequence they set out for start up of the pressure washer. If as I mentioned previously the washer hose is already attached to the spray gun being the norm, line #6 can eliminated. They could also remove point #10 from the sequence; it states "Connect the garden hose to the water inlet. Tighten by hand". You have already done this in step #3. A minor oversight by whomever wrote the manual and subsequent editing. Lastly I noticed an old, stale fuel smell from the fuel tank when I opened it which was also noted on another review. I had no issues with startup unlike the other reviewer but it might be an idea for BE to use a little fuel stabilizer in the tank when they do their testing.
    Date de publication: 2019-06-15
    Rated 5 de 5 de par Easy to start and powerful. Awesome quality for the price. The honda engine started on second pull. The hose is good quality but 25 feet is quite short. The wand works awesome and the soap injector is quite practical. The pump is annovi reverberi jrv series which is a commercial pump. The adjustable unloader allows for quite low pressure for car washing all the way up to 3000 or so psi which can clean concrete or anything else. I might buy a longer hose. The machine is assembled in Be Power Equipment in Abbotsford BC to top it off and shipped right from their plant. The delivery was quite long (almost a month) but not unreasonable seeing it had to cross 3/4 of the country all the way to Quebec but was delivered securely fastened to a wooden pallet so the box and machine were in pristine condition. Quite happy with my purchase. Using some pump saver every few times I use it and before winter storage, the machine should last me decades of residential use.
    Date de publication: 2019-05-14
    Rated 4 de 5 de par Out of box and fired up no issues Only used afew times but works great with lots of cleaning power.
    Date de publication: 2019-05-10
    • y_2019, m_12, d_12, h_1
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_7, tr_22
    • loc_fr_CA, sid_1000745098, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 31ms
    • REVIEWS, PRODUCT

    What pressure pump is supplied with that model? There is absolutely no information on this model on BE power equipment website, is it discontinued model?

    Posée par: mike
    Hi Mike, This is not a discontinued model and it is a custom unit for Home Depot, the pump is Annovi Reverberi 3200 psi
    Répondue par: BE POWER EQUIPMENT
    Date de publication: 2018-11-01

    Is the current build of this pressure washer suppose to have disconnects on both ends of the hose? I picked up one built in March 2018 and there's a quick disconnect on the washer side, but threaded onto the gun. The manual shows otherwise.

    Posée par: Colin
    Hi Colin, Can you please call or hotline 1-800-663-833, ask for Ted, he already knows about this case and is more than happy to assist you with your question.
    Répondue par: BE POWER EQUIPMENT
    Date de publication: 2019-08-07

    I just purchased this pressure washer and noticed that there is a perfectly circular hole (in other words, it was machined) in the silver casted piece between the engine and pump. The hole is open, is there supposed to be something plugging it? Thanks!

    Posée par: Jimmy
    Hi Jimmy Thank you very much for the image you sent us about your question. This hole serves different functions, depending on the pressure washer and what build structure used in manufacturing, for your pressure washer this hole is an inspection viewing port to confirm the location of the locking key, the locking key stock engages the drive shaft from the engine to the drive collar on the high pressure pump. Perfectly designed for its application during the service inspection procedure. Thank you,
    Répondue par: BE POWER EQUIPMENT
    Date de publication: 2019-04-15

    Can I run hot water in this pressure washer?

    Posée par: gradford
    Hi Gradford and thank you very much for your question. You can run warm water up to a maximum temperature of 100°F through the pump, but please note that cold water is better for preserving the integrity of the seals and valves.
    Répondue par: BE POWER EQUIPMENT
    Date de publication: 2019-04-11

    Does this unit ship with oil already in the engine?

    Posée par: Oakville
    Hi Oakville Yes motor oil does come in engines the only time it doesn’t is if we have to air freight product.
    Répondue par: BE POWER EQUIPMENT
    Date de publication: 2019-08-07

    I can't tell by the picture because i can't see the pump on the back side... Are you able to adjust the pressure on this model

    Posée par: blair
    Hi Blair Yes! you can adjust water pressure by backing off set screw and adjusting Allen key.
    Répondue par: BE POWER EQUIPMENT
    Date de publication: 2019-04-11
    • y_2019, m_12, d_12, h_1CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_6
    • loc_fr_CA, sid_1000745098, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 62ms
    • QUESTIONS, PRODUCT