NOS PRIX SONT IMBATTABLES. NOUS LE GARANTISSONS.Certaines conditions s’appliquent

BEHR DECKplus - teinture imperméabilisante pour bois de couleur opaque - Base foncée no 213, 3,79 L

Modèle nº 21301C|Nº UGS 1000155130

Aperçu
Spécifications
Évaluations

Aperçu

Modèle # 21301C Internet # 1000155130

Une teinture latex 100% acrylique de première qualité d'une couleur unie opaque pour tous les types de bois. Cette formule latex 100% acrylique procure une excellente adhérence et forme un fini hautement protecteur et durable, qui résiste aux éraflures, craquelures, écaillures et au cloquage.

  1. Idéal pour terrasses en bois, clôtures, bardages et meubles de patio en bois
  1. Nettoyage facile à l'eau
  1. Satisfaction garantie pour 15 ans sur surfaces verticales
  1. Protection UV contre la décoloration
  1. 83 couleurs sur mesure disponibles
  1. Fini durable hydrofuge

Spécifications

Dimensions

Hauteur assemblé
8.25
Hauteur de l’emballage (en pouces)
8.25
Largeur assemblée
12.25
Largeur de l’emballage (en pouces)
12.25
Poids assemblé
13.7
Poids de l’emballage (en livres)
13.7
Profondeur assemblé
9.25
Profondeur de l’emballage (en pouces)
9.25

Détails

Antimoisissure
Oui
Certifié
Oui
Lavables
Oui
Pays d'origine
US-United States
Quantité dans le contenant (L)
3.79
Résistance aux rayons UV et à la décoloration
Oui
Résistance à lhumidité
Oui
Surface couverte (pi²)
300
Transparence
Printemps, été
À lépreuve des intempéries
Oui

Garanties et certifications

Pour obtenir des renseignements sur la garantie de ce produit, veuillez contacter notre Service à la clientèle Internet au 1-800-435-4654.
DECKplus - teinture imperméabilisante pour bois de couleur opaque - Base foncée no 213, 3,79 LPhoto of productUne teinture latex 100% acrylique de première qualité d'une couleur unie opaque pour tous les types de bois. Cette formule latex 100% acrylique procure une excellente adhérence et forme un fini hautement protecteur et durable, qui résiste aux éraflures, craquelures, écaillures et au cloquage.
BEHR
1000155130
CAD45.97
The Home Depot Canada
DECKplus - teinture imperméabilisante pour bois de couleur opaque - Base foncée no 213, 3,79 L est évalué 4.4 de 5 de 174.
  • y_2019, m_10, d_19, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_174
  • loc_fr_CA, sid_1000155130, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 96ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par I spray applied this stain on my deck and it made it look great! I don't know about the longevity... I spray applied this stain on my deck and it made it look great! I don't know about the longevity yet, but so far so good! It has been on the deck for a little over a month and I have seen no signs of wear to date.
Date de publication: 2019-09-19
Rated 3 de 5 de par 3 Star Review Rating provided by a verified purchaser
Date de publication: 2019-02-07
Rated 4 de 5 de par 4 Star Review Rating provided by a verified purchaser
Date de publication: 2019-02-07
Rated 5 de 5 de par 5 Star Review Rating provided by a verified purchaser
Date de publication: 2019-02-07
Rated 5 de 5 de par 5 Star Review Rating provided by a verified purchaser
Date de publication: 2019-02-07
Rated 4 de 5 de par 4 Star Review Rating provided by a verified purchaser
Date de publication: 2019-02-07
Rated 5 de 5 de par Very easy to apply ... Very easy to apply
Date de publication: 2019-02-05
Rated 5 de 5 de par 5 Star Review Rating provided by a verified purchaser
Date de publication: 2019-02-05
  • y_2019, m_10, d_19, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_174
  • loc_fr_CA, sid_1000155130, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 29ms
  • REVIEWS, PRODUCT

instructions for 2 part epoxy application

Posée par: Anonyme
For complete instructions please contact Behr. I have attached the preparation directions for Behr's 2-Part Epoxy. PREPARATION* (The following steps are recommended for best results.) For New or Uncoated Concrete • New concrete must cure for a minimum of 30 days. • The surface must be clean, dry and free of dust, dirt, grease, oil, curing agents and all other contaminants. • For proper penetration and adhesion of topcoat, use BEHR® NO. K-109924 CONCRETE CLEANER & ETCHER (included in kit). Wear protective clothing, eye goggles and acid resistant rubber gloves and footwear. Dissolve all concentrated powder with 1 gallon (4 litres) of warm water in a plastic container and stir. Pre-wet the surface with water. Apply all solution using a plastic watering can. One gallon of dissolved solution will etch and clean approximately 200-250 sq. ft. (19-23 m2). Allow product to stand for 10 minutes, then scrub vigorously using a stiff plastic brush. • Rinse surface thoroughly using a garden hose with the nozzle set in a stream pattern or pressure wash for best results. Allow the surface to dry completely. For Previously Coated Concrete (Oil or Water Base Finishes) • Previously painted concrete may be repainted only if it has excellent adhesion to the floor. • Remove any loose or peeling paint by sanding (medium grit paper) or wire brushing the surface. To completely remove all existing coating, use BEHR NO. 992 CONCRETE & MASONRY PAINT STRIPPER. • Dull glossy surfaces by scuff-sanding or using a chemical deglosser. • The surface must be clean, dry and free of dust, dirt, grease, oil or other contaminants. Use BEHR® NO. K-109924 CONCRETE CLEANER & ETCHER to clean the surface. Follow all label instructions. • Rinse surface thoroughly using a garden hose with the nozzle set in a stream pattern. Allow the surface to dry completely. Important : • Excess residue may interfere with the adhesion of the BEHR® PREMIUM 2-PART EPOXY GARAGE FLOOR COATING. Wipe your fingers over the clean floor to check for dust or powder. If residue is visible on your fingers, repeat the rinsing step. Remove excess water with a squeegee or mop. • Remove any remaining oil or grease spots on your concrete using BEHR® NO. 990 CONCRETE & MASONRY CLEANER/DEGREASER. Follow all label instructions. • Note: The floor must be thoroughly cleaned, completely rinsed and dry for the coating to adhere properly to the surface.
Répondue par: HildaL
Date de publication: 2013-10-23

What product should I use to paint the wood floor in an enclosed car trailer that will be durable and non-slip?

Posée par: Anonyme
It would be best to use a coating recommended that is tire resistant and can be applied to wood floors. Unfortunately, Behr does not have this type of product at this time.
Répondue par: HildaL
Date de publication: 2013-10-23

what paint coatings are reccomended for basement floors?

Posée par: Anonyme
Basement floors can be coated with Behr 1-Part or 2-Part Epoxy, Behr Porch and Floor Paint, or Behr Semi-Transparent or Solid Color Concrete Stain. I would strongly recommend that the surface be checked for hydrostatic pressure and prepared according to label instructions prior to applying the paint. I should also mention that except for the 2-Part Epoxy, all bare concrete should be primed with Behr No. 800 prior to applying any of these products.
Répondue par: BehrExperts
Date de publication: 2013-10-23

What is coverage for Behr 2-part epoxy coating?

My concrete garage floor has some spots with serious surface roughness from road salt and some cracks. What do you recommend for patching the cracks?
Posée par: Anonyme
Applying an even coat using a 3/8” nap roller cover at a spread rate will give you about 200-250 sq. ft. per gallon. The surface imperfections must be patched, but before patching the cracks, clean and etch the concrete. Use patching materials that contain polymer additives or blended cements. Patching materials that contain these things often stick much better to older concrete. If you see the words "acrylic", "vinyl", or "gypsum cement" on the label, chances are you are in good shape. You can also use liquid additives. Some of these additives are mixed with the patching compound, while others are applied to the surface to be patched. 100 percent epoxy patching compounds are also available. If the patching material they use contains cement, they should allow at least 30 days for curing, then acid etch to reduce alkalinity before applying the 1-Part Epoxy Paint.
Répondue par: BehrExperts
Date de publication: 2016-06-30
  • y_2019, m_10, d_19, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_fr_CA, sid_1000155130, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 85ms
  • QUESTIONS, PRODUCT
<?xml version="1.0" encoding="utf-8"?>