• Mobile Menu
    La propreté et la sécurité de nos magasins est l'une de nos principales priorités.En savoir plus

    Bora Serre-joints de 31 po (ensemble de 2)

    Modèle nº 571131T|Nº UGS 1001234083

    Aperçu

    Modèle # 571131T Internet # 1001234083

    BORA sait à quel point il est important de fixer fermement vos marchandises encaissées et autres projets de menuiserie. Une stabilité à toute épreuve produira un travail plus précis et un produit fini faisant preuve de savoir-faire et de fierté. Notre attache à serrage parallèle est le serre-joint que les amateurs et les professionnels recherchent lorsqu'ils travaillent sur leurs projets. Avec une pression parfaite (1100 lb/500 kg), trois passe-lames de 89 mm avec pinces capitonnées et des tailles allant de 12 à 50, il devient un outil extrêmement polyvalent pour vos besoins de serrage. Ajoutez les petits extras qui font ressortir tous les produits BORA. une attache de serrage passive avec verrou inférieure et une grande poignée facile à saisir. C'est presque comme si vous auriez conçu cette pince vous-même.

    1. Pour les meubles en bois et les autres projets de menuiserie nécessitant un serrage précis, la pince à serrage parallèle accomplira le travail
    1. Notre conception maintient le serrage en place lors de l'attachement de la pince
    1. Pas trop desserré, pas trop serré - juste comme il faut avec 500 kg/1100 livres de pression de serrage
    1. Disponible en plusieurs tailles, cette pince à serrage parallèle BORA répond à tous vos besoins de serrage

    Spécifications

    Dimensions

    Hauteur assemblé
    38.5
    Hauteur de l’emballage (en pouces)
    38.5
    Largeur assemblée
    2.5
    Largeur de l’emballage (en pouces)
    2.5
    Poids assemblé
    14
    Poids de l’emballage (en livres)
    14
    Profondeur assemblé
    5.5
    Profondeur de l’emballage (en pouces)
    5.5

    Détails

    Pays d'origine
    CN-China
    Résistance de serrage (en lb)
    1100

    Garanties et certifications

    Durée de vie limitée
    Serre-joints de 31 po (ensemble de 2)Bora Serre-joints de 31 po (ensemble de 2)BORA sait à quel point il est important de fixer fermement vos marchandises encaissées et autres projets de menuiserie. Une stabilité à toute épreuve produira un travail plus précis et un produit fini faisant preuve de savoir-faire et de fierté. Notre attache à serrage parallèle est le serre-joint que les amateurs et les professionnels recherchent lorsqu'ils travaillent sur leurs projets. Avec une pression parfaite (1100 lb/500 kg), trois passe-lames de 89 mm avec pinces capitonnées et des tailles allant de 12 à 50, il devient un outil extrêmement polyvalent pour vos besoins de serrage. Ajoutez les petits extras qui font ressortir tous les produits BORA. une attache de serrage passive avec verrou inférieure et une grande poignée facile à saisir. C'est presque comme si vous auriez conçu cette pince vous-même.
    Bora
    1001234083
    CAD138
    Home Depot Canada
    Serre-joints de 31 po (ensemble de 2) est évalué 4.4 de 5 de 8.
    • y_2020, m_10, d_26, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
    • cp_1, bvpage1
    • co_hasreviews, tv_2, tr_6
    • loc_fr_CA, sid_1001234083, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 96ms
    • REVIEWS, PRODUCT
    Rated 5 de 5 de par Wow, I absolutely love these clamps by Bora. The passive lock design is a nice feature that allow... Wow, I absolutely love these clamps by Bora. The passive lock design is a nice feature that allows you to square up the clamp...then just twist the screw portion to tighten everything up. The face of the clampis wide and non-marring with a nice rubber grip pad. I recently used these clamps to make a picture frame and keep everything square as the glue dried. The clamps are easy to disengage as well. I absolutely love these and I highly recommend for the professional or DIY enthusiast [This review was collected as part of a promotion.]
    Date de publication: 2018-07-09
    Rated 5 de 5 de par These clamps are made to work well. There is absolutely no wiggle when they are clamped down so ... These clamps are made to work well. There is absolutely no wiggle when they are clamped down so they are excellent for furniture and cabinet building. There is a non-marring coating to protect your project and at 31" these will be very useful in most applications. They are a bit hard to open when first used but I think that will improve with time. Overall a very good clamp. [This review was collected as part of a promotion.]
    Date de publication: 2018-06-13
    Rated 4 de 5 de par These clamps are very heavy, duty. They are relatively easy to operate, once you know how to. To ... These clamps are very heavy, duty. They are relatively easy to operate, once you know how to. To open the clamps, pull the twist handle away from the steel shaft and then it slides easily either direction. Instructions would be helpful. The clamping pads look off when slid together, but the pads come together evenly when the screw handle is tightened to apply even pressure along the clamp surface. One clamp arrived with the steel shaft discolored. Not sure why, but it can be seen in the photos below. It could just be a slight defect, or something else. [This review was collected as part of a promotion.]
    Date de publication: 2018-06-02
    Rated 4 de 5 de par These clamps will be a go-to item for the woodworking crowd (unfortunately, the plastic parts will preclude their use in welding fit up), with the acme-threaded lead-screw providing true parallel jaw movement to facilitate glue-up. The integral bar maintains the alignment of the fixed and moveable jaws, while the plastic end retainer serves to keep the clamp “on the level” when resting on the work surface. The retainer incorporates a cam-type locking mechanism to secure it to the desired location on the bar. Care should be taken when securing the end retainer to avoid over torquing the securing knob (hopefully replacement parts are available, though nothing was found on the manufacturer’s website). The jaws have removable faces which are resistant to glue. Again, nothing was noted regarding replacement parts, but these faces will, no doubt, at some point have to be replaced. The clamps can be used utilizing the full 3 ½ inch x 1 ¾ inch face or, if orientation requires, the ¾ inch “side” face (with the bar abutting the work piece). After using, for years, clamps using a section of pipe as the backbone element, the major improvement of this style of clamp, not having to concern oneself with the rotation of the jaws, is apparent. An additional plus is the one-handed operation (lifting up on the handle allows one to slide the jaw) to adjust the movable jaw and then snug it down, using the acme-threaded leadscrew (one will probably want to use some dry lubricant on the threads). The 31 inch bar will handle most general clamping needs in the home shop (as well as the commercial ones). The manufacturer’s specification indicate the clamp is capable of applying 1100 pounds…(which, for the 6.125 square inch jaws results in about 180 pounds per square inch) sufficient for most glue ups. The moveable jaw can be reversed, if it is necessary to apply spreading pressure. The handle has a softer durometer insert material to provide comfort while applying pressure to the work piece. There is no provision for auxiliary torque input (square shaft or hex insert), however, it was possible to apply the necessary amount of clamping pressure unaided. The manufacturer offers a lifetime warranty should any defects manifest themselves. Their ruggedness was proven by virtue of suffering no damage to the clamps, even though the shipping damage to the carton was significant (see photo).If a ready source of replacement jaw inserts as well as intermediate stand-offs (to keep the workpiece off of the bar) was available, a fifth star would be deserved. [This review was collected as part of a promotion.]
    Date de publication: 2018-06-02
    Rated 4 de 5 de par This is the first set of parallel clamps I've owned. I like the square bases that allow the clam... This is the first set of parallel clamps I've owned. I like the square bases that allow the clamps to stand on their own,and the replaceable jaw faces that allow for non marring clamp pressure. The headstock is easy to rotate to use as a spreader clamp. Since there were absolutely no instructions with the clamps, it took a bit to figure out how to slide the head back and forth on the bar. It is the first clamp I've had that the screw handle pushes down toward the bar to release from the teeth on the bar. Either a printed or web based instructional would be very helpful. [This review was collected as part of a promotion.]
    Date de publication: 2018-05-30
    Rated 5 de 5 de par Picked up a pair of 31 in Parallel Clamps, Bora Portamate, for a furniture repair project. I have... Picked up a pair of 31 in Parallel Clamps, Bora Portamate, for a furniture repair project. I have numerous similar appearing clamps, but I needed more grip spread over a larger area. These parallel clamps fill the bill. These clamps bring a new meaning to the phrase "heavy duty"! They are large, heavy, and clamp very well. At first glance the clamping areas were not parallel and I was worried about too much pressure in a very small area. But the clamp flexes to become parallel without flexing any further. Lift up on the pressure screw handle and slide the clamp jaws either closer or farther apart. There is a plastic stop bar at the end of the clamping bar that is adjustable for making repetitive clamp uses at the same width very easy. 1100 lb clamping pressure, 3.5 in throat depth, and best of all Lifetime Warranty! What a great find! [This review was collected as part of a promotion.]
    Date de publication: 2018-05-19
    • y_2020, m_10, d_26, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
    • cp_1, bvpage1
    • co_hasreviews, tv_2, tr_6
    • loc_fr_CA, sid_1001234083, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 26ms
    • REVIEWS, PRODUCT
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 79ms
    • QUESTIONS, PRODUCT
    • bvseo-msg: The resource to the URL or file is currently unavailable.;