Découvrez nos produits Depot Drop hebdomadaires - En ligne seulement + livraison gratuite!  Magasiner maintenant

Aperçu

Modèle # HA3JAW Internet # 1001814950

1/2 po. cliquet sans clé pour des changements de bit faciles. Manche en métal pour durabilité robuste. Utiliser uniquement en mode rotation.

  1. 1/2 po. Capacité à trois mâchoires avec la tige SDS-plus
  1. Cliquet sans clé pour verrouiller rapidement les bits en place
  1. Pour une utilisation avec des bits de forage à tige droite
  1. Peut être utilisé en mode de forage uniquement

Spécifications

Dimensions

Hauteur assemblé (en pouces)
7.75
Hauteur de l’emballage (en pouces)
7.75
Largeur assemblée (en pouces)
4.249
Largeur de l’emballage (en pouces)
4.25
Poids assemblé (en livres)
0.82
Poids de l’emballage (en livres)
0.82
Profondeur assemblé (en pouces)
1.759
Profondeur de l’emballage (en pouces)
1.76

Détails

Ampérage
0
Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Fonctionne bien par temps froid
Idéalement utilisé avec
Outils Bosch, 18 V
Matériau de la mèche
Acier
Matériau de la pointe
Acier
Nombre de pièces dans lensemble
1
Pays d'origine
DE-Germany
Type d'accessoire pour outils à moteur
Mèches et accessoires pour outils rotatifs
Type d'applications
Forage
Type de tige
SDS Plus
Utilisation
Métal

Garanties et certifications

12 Mois
Chuck à trois mâchoires sans clé avec la tige SDS-PlusBosch Chuck à trois mâchoires sans clé avec la tige SDS-Plus1/2 po. cliquet sans clé pour des changements de bit faciles. Manche en métal pour durabilité robuste. Utiliser uniquement en mode rotation.
Bosch
1001814950
CAD70.982024-06-19
Home Depot Canada
Chuck à trois mâchoires sans clé avec la tige SDS-Plus est évalué 4.1 de 5 de 142.
  • y_2024, m_6, d_18, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_23, tr_119
  • loc_fr_CA, sid_1001814950, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 74ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par Makes my rotary hammer more versatile I am able to use my rotary hammer for more things than just concrete drilling. I am able to use the torque of my Bosch Bulldog to run big hole saws and spade bits. You can NOT use the hammer function while using this attachment. That is the only downside. I bought this attachment for that reason at the time. It wasn't until I got it home did I read the directions and realized that. I needed to use a 1/8th inch masonry drill bit and I can't find a SDS one. The smallest they go is 5/32. I had to buy a smaller hammer drill with a normal chuck to complete my project. I would think the chucks in the hammer drills and this attachment should be about the same but I guess not.
Date de publication: 2015-06-05
Rated 4 de 5 de par Great accessory . . . but . . . This adapter locks into the Bosch SDS chuck and enables you to use your non-SDS bits and accessories. I was using my Bosch Bulldog hammer drill in the drill mode with a 3-inch hole saw to cut 16 3-inch holes through two thicknesses of 2X lumber to install vents. After cutting 12 of the 16 3-inch holes, this adapter quit working, The 3-inch hole saw was installed, the adapter would not loosen or tighten for me to change bits. In fact, the hole saw arbor is still locked into the adapter . . . don't know how to get it out. May have been that I put too much torque or something on it -- it was a tough job. Except for that incident, I am, 100% pleased. Am ordering another one plus a spare. Meanwhile, I know the Bosch Bulldog uses the SDS system. I wish Bosch or someone made the following with SDS shanks: -- Wood boring bits up to 1-inch diameter -- Hole saw arbor -- Regular high speed drill bits
Date de publication: 2019-03-20
Rated 4 de 5 de par VERSATILITY Lets me use so many other bits and attachments I had previously
Date de publication: 2017-07-19
Rated 5 de 5 de par Excellent addition for an excellent drill. The chuck is easy to use, well made, and rugged. Jus... Excellent addition for an excellent drill. The chuck is easy to use, well made, and rugged. Just pop it in the SDS-Plus jaw of the drill and you're ready to go. Just make sure you select "drill only" on your hammer drill when you use this chuck. Bosch has quality that shows. I haven't experienced any loosening of bits in the 1/2 in. jaw that others have mentioned, but I have a habit of tightening a key-less chuck every so often when I work with this type of tool. I have no complaints. The 1/2 in. chuck is worth the money.
Date de publication: 2020-05-31
Rated 5 de 5 de par Why BOSCH doesn't promote this key-less chuck when buyers of... Why BOSCH doesn't promote this key-less chuck when buyers of the tool already have dozens of non-proprietary drill in their bags and don't need to re-buy SDS chucked bits. Sellers of the tool rarely have the key-less chuck; buyers and tool staff in the store often don't know it exists.I think it is WONDERFUL.... but it is sad that it is under appreciated.
Date de publication: 2019-11-26
Rated 3 de 5 de par Probably okay for light/normal duty, but it was toast after... Probably okay for light/normal duty, but it was toast after several days of driving tapcons into concrete block. Used in drill mode only per the instructions, only after drilling pilot holes. Pilot holes drilled using SDS bit, not with this chuck, in case that was not clear.
Date de publication: 2018-10-16
Rated 5 de 5 de par I read unfavorable reviews on this product but wanted to see for myself. I could not find any oth... I read unfavorable reviews on this product but wanted to see for myself. I could not find any other solutions to convert my sds chuck to a keyless chuck that would except my 1" x 14" drill bit. I have had zero failures and given that I am drilling a tree stump 12" deep with over 50 1" holes I am happy with the product and would recomend it. I have really tested its limits and it performed to my expectations.
Date de publication: 2018-05-15
Rated 1 de 5 de par The back end of this chuck almost immediately came off... The back end of this chuck almost immediately came off with use. Unfortunately Bosch isn't what it used to be. Its all made in China and its all junk.
Date de publication: 2020-07-01
  • y_2024, m_6, d_18, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_23, tr_119
  • loc_fr_CA, sid_1001814950, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 47ms
  • REVIEWS, PRODUCT

What size sds plus shank is it?

Is the sds plus shank 3/4”?
Posée par: MikeC
SDS plus is 10 mm SDS top is 14 mm SDS max is 18 mm
Répondue par: Dre
Date de publication: 2023-05-06

Is this made in China? If not, where? Thanks.

Is this made in China? If not, where? Thanks.
Posée par: Karl
Germany
Répondue par: O1Scotts
Date de publication: 2020-12-28

Bosch 1/2 in. 3-Jaw Keyless Chuck with SDS-Plus Shank ...

Bosch 1/2 in. 3-Jaw Keyless Chuck with SDS-Plus Shank can this be used as a nut driver , wood screws , metal screws , bolts , lag bolts driver etc. ?
Posée par: mace
This is a drill chuck that converts an SDS-plus drill into a standard drill, so any straight shank drill bit or hex bit will fit in this chuck.
Répondue par: Barney
Date de publication: 2023-02-12

will it work on Milwaukee sds m 18 hammer drill

Posée par: oldhippy
The HA3JAW Chuck is used with SDS-plus Rotary Hammer to accept standard drill bits. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Répondue par: BoschTools
Date de publication: 2023-05-07

Will this fit my ryobi P222

Posée par: Toc
The Ryobi P222 is a SDS-Plus Rotary Hammer Drill and will allow the Bosch keyless chuck with SDS-plus shank to be used with it in the same way that any SDS or SDS-plus bits are used.
Répondue par: Oldman
Date de publication: 2023-05-05

Drill chuck assembly for Makita Hammer Drill HR 2475

Hi, I bought new makita hammer drill HR 2475 now I WANA buy drill chuck assembly , I found this part online of chuck assembly ( Model # HA3JAW ). I WANA know does this chuck fits with makita hammer drill model HR 2475 ? Thanks, Sal
Posée par: Sal
Thank you for your question. The Bosch HA3JAW has an SDS-Plus shank. If your hammer drill accepts SDS-Plus bits then this adapter should work.
Répondue par: BoschTools
Date de publication: 2023-05-02

will sds max bit fit in this chuck?

i want to use sds max bit in my sds plus.. will this chuck accomodate sds max bit to use for sds plus tool?
Posée par: trud
No, It's the opposite. This chuck fits an SDS drill motor. You can use this chuck with standard straight shank drill bits on your SDS type drill motor.
Répondue par: JRay
Date de publication: 2023-05-05

Will this work with a large hole saw (6-inch holesaw with 3/8in shank)? Looking to drill 6-inch range hood exhaust hole through pressure-treated lumber without seizing up and kicking back (regular drill). This with my SDS Plus rotary hammer and holesaw?

Posée par: ks2k
Hi there! Using a bi-metal hole saw may do the job. For further assistance with your application please contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST so we may further discuss with you options.
Répondue par: BoschTools
Date de publication: 2023-05-07
  • y_2024, m_6, d_18, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_fr_CA, sid_1001814950, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT