Achetez en ligne et ramassez en magasin ou dans le stationnement  En savoir plus

Aperçu

Modèle # MP500T Internet # 1001010534

Les forets polyvalents Daredevil de Bosch aident les utilisateurs à avoir un impact dans le métal et la maçonnerie, ainsi que dans d'autres matériaux. Sa tête multi-meules améliorée est résistante au métal et permet de percer jusqu'à 85 % plus rapidement dans le métal que les forets standard, ce qui en fait un véritable foret tout-en-un. Pour une polyvalence ultime dans de multiples matériaux, ces embouts à impact ont des tiges hexagonales, pour une utilisation avec des marteaux perforateurs ou des tournevis à impact. Les embouts sont adaptés aux métaux plus épais tels que les cornières, ainsi qu'aux tôles, à l'aluminium, à la maçonnerie, aux briques, aux blocs, aux tuiles, au bois et au PVC. Ils sont dotés de cannelures abruptes avec nervures pour un dépoussiérage rapide, ainsi que de pointes conçues pour réduire le déplacement de l'embout et obtenir des trous propres. Les embouts sont fabriqués selon les spécifications exactes de Bosch et sont dotés de pointes innovantes en carbure de tungstène, pour une durée de vie jusqu'à 9 fois supérieure à celle des embouts standard dans les applications multi-matériaux.

  1. Perce le carreau, la maçonnerie, le bois, le métal et le béton
  1. Construction longue durée - offre une durée de vie jusqu'à 9 fois supérieure à celle des embouts standard dans les applications multi-matériaux.
  1. Conception de l'embout sans patin - permet de réaliser des trous plus propres
  1. Plaque innovante au carbure de tungstène - Compatible avec des travaux tout usage
  1. Arêtes coupantes affûtées au diamant - Pour un perçage rapide, même dans les matériaux durs comme la céramique et le béton
  1. Tête de perçage robuste - Offre une durée de vie prolongée pour les travaux de perçage avec ou sans percussion
  1. Têtes multibroyeurs améliorées - permettent de percer le métal jusqu'à 85 % plus rapidement qu'avec les mèches standard.
  1. Tiges hexagonales et résistance aux chocs - permettent une utilisation dans les perceuses à percussion et les marteaux perforateurs pour une plus grande polyvalence.
  1. Bords coupants affûtés - conçus pour des performances avancées
  1. Cannelures profondes avec nervures - pour un enlèvement de matière rapide dans de nombreux matériaux.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
7.47
Hauteur de l’emballage (en pouces)
6.95
Largeur assemblée (en pouces)
1.57
Largeur de l’emballage (en pouces)
2.86
Poids assemblé (en livres)
0.44
Poids de l’emballage (en livres)
0.42
Profondeur assemblé (en pouces)
1.57
Profondeur de l’emballage (en pouces)
0.63

Détails

Article individuel, Ensemble
Ensemble
Caractéristiques des accessoires pour outils à moteur
Universel
Certifié
Diamètre de la mèche (en po)
5
Idéalement utilisé avec
Perceuses à percussion
Matériau de la mèche
Carbure
Nombre de pièces dans l'ensemble
5
Pays d'origine
CN-China
Type d'accessoire pour outils à moteur
Maçonnerie et percussion
Type de mèche
Mèche pour utilisations spécialisées
Type de tige
Hexagonale
Utilisation
Plastiques et composites, Aluminium

Garanties et certifications

Seulement défauts
Ensemble de 5 forets MultipurposeBosch Ensemble de 5 forets MultipurposeLes forets polyvalents Daredevil de Bosch aident les utilisateurs à avoir un impact dans le métal et la maçonnerie, ainsi que dans d'autres matériaux. Sa tête multi-meules améliorée est résistante au métal et permet de percer jusqu'à 85 % plus rapidement dans le métal que les forets standard, ce qui en fait un véritable foret tout-en-un. Pour une polyvalence ultime dans de multiples matériaux, ces embouts à impact ont des tiges hexagonales, pour une utilisation avec des marteaux perforateurs ou des tournevis à impact. Les embouts sont adaptés aux métaux plus épais tels que les cornières, ainsi qu'aux tôles, à l'aluminium, à la maçonnerie, aux briques, aux blocs, aux tuiles, au bois et au PVC. Ils sont dotés de cannelures abruptes avec nervures pour un dépoussiérage rapide, ainsi que de pointes conçues pour réduire le déplacement de l'embout et obtenir des trous propres. Les embouts sont fabriqués selon les spécifications exactes de Bosch et sont dotés de pointes innovantes en carbure de tungstène, pour une durée de vie jusqu'à 9 fois supérieure à celle des embouts standard dans les applications multi-matériaux.
Bosch
1001010534
CAD43.982022-08-11
Home Depot Canada
Ensemble de 5 forets Multipurpose est évalué 4.5 de 5 de 348.
  • y_2022, m_8, d_10, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_16, tr_332
  • loc_fr_CA, sid_1001010534, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 75ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Perfect set of bits! I'm very happy with these drill bits. As a woman, I need an extra bit of muscle to do the tasks I do and these were just perfect. I have used 3 of the bits so far, one on thin wall plaster and sheet rock, one on wood, and the other on a concrete block. The 3/8" bit tore through a 2" concrete block no longer than 5 inches without cracking it - just left a perfect hole to drive a landscape nail through. The others put perfectly round holes with no chipping of the walls or plaster. The length of each bit is tops over any I have, making them keepers in my toolkit. My projects are mostly yard and home and these might seem overkill to some, but for me they add the needed muscle I lack!
Date de publication: 2013-04-25
Rated 5 de 5 de par I was installing a shower enclosure and had to secure the frame to PORCELAIN. Porcelain is very ... I was installing a shower enclosure and had to secure the frame to PORCELAIN. Porcelain is very tough stuff. I bought these because I have used Bosch cobalt bits for metal drilling and they are superb. So I bought some Bosch carbide 6 inch long drill bits (Model #MP500T) designed for tile and concrete - they were great! I started with the smallest bit and worked up until I had drilled the 5/16 inch size required. I took it slow and easy and had no problems. I also dipped the drill bits in water as I drilled to keep the bits cool although these Bosch bits never got more than warm. I am so pleased with these bits and all other Bosch products - wish I owned a Bosch impact driver and drill! There ya go.
Date de publication: 2017-02-11
Rated 5 de 5 de par Drilled through steel Had to make 2 holes in an old lawn mower blade. First tried High Speed Steel and it cut a cone shaped depression in the steel then just spun and didn't bite any more. Sharpened and still no luck. Purchased Milwaukee Cobalt and Masonry bits and both just spun without cutting. Sharpened the masonry bit on a grinder and still no luck. Tried Bosch Blue Granite Turbo Carbide and they did a little better but stopped cutting. After all this I gave these Multi-Material Carbide bits a try. The tip is noticeably sharper and they are made in Germany. They dug in and slowly cut their way through the steel where all others had failed. Apparently it's not enough to just have a carbide tip. That tip needs to be sharp with the right geometry to dig into the steel and cut. These did.
Date de publication: 2016-07-28
Rated 4 de 5 de par very useful in some situations They do what they claim: drill almost anything. I got reasonably clean holes in wood and heavy sheet metal, and the same bit went into brick and patio stone with no problem. Not as precise as twist drills, but fine for rough work. The point is like a masonry bit, rather than a sharp cone, so it can 'walk' a little when penetrating a surface; a small starter hole or indentation with a punch would help. You're supposed to use these only in a variable speed hand drill and start at low RPMs. Unfortunately you're not supposed to use them in a drill press - probably because it's a fixed speed - but maybe if you set the press slow it would be ok. These could great when drilling something difficult, or through a combination of materials, i.e. drywall over a stud, or through a stuccoed exterior wall.
Date de publication: 2013-06-12
Rated 5 de 5 de par I got this to drill into concrete which it did very well. I have only used it on one job but that... I got this to drill into concrete which it did very well. I have only used it on one job but that included 24 holes and I plan on using it on many more future projects. These are definitely stronger than ordinary drill bits. I liked the variety of sizes to properly drill a large hole by starting small and then going bigger. Since they are impact driver ready as well as hammer drill ready, I was able to use the smallest one in my impact driver for the initial small pilot hole which saved time in changing bits in my hammer drill less often. Another good thing that you have with these bits that they each are 6" even in the smaller bits which makes them good for drilling smaller deeper holes in materials that their regular bits are too short for such depth. Overall a very good value pack for your buck.
Date de publication: 2019-01-23
Rated 5 de 5 de par Outstanding flexibility There's a lot to like here. This has now become my "go to" set of bits. I like the long length. At the loss of some precision, it allows deeper drill holes and is useful in odd situations such as gaps in the walls. The flexibility to go between hammer and drill mode is great. With the flick of a switch on my drill, I can switch out. (See video.) Overall, the bits have a sturdy, quality feel to them. Nothing cheap here. Finally, I like the package, which serves as a case. It hangs on my pegboard ready to go. The bits are secured with a screw on top.
Date de publication: 2013-03-26
Rated 5 de 5 de par Was drilling quite a few holes in concrete for anchors and standard bits were very slow and some... Was drilling quite a few holes in concrete for anchors and standard bits were very slow and sometimes unable to complete the job. I purchased this five pack and have only used the 3/8 in. bit so far, but it did a great job. Drills much faster so it is easier on the drill motor and me. And, it completed all of the holes that I started with it. Now I have an assortment of really good bits for future projects involving drilling into concrete or masonry.
Date de publication: 2017-09-26
Rated 4 de 5 de par Great set of bits for the price Lost the bit I needed and had to rush to the store to get a new one. This set was far more affordable than most and was higher quality than the last set I bought
Date de publication: 2013-07-10
  • y_2022, m_8, d_10, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_16, tr_332
  • loc_fr_CA, sid_1001010534, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 54ms
  • REVIEWS, PRODUCT

Will these bits work on marble counter tops?

Will these bits work on marble counter tops?
Posée par: ShunY
This MP500T Drill Bit Set is designed for drilling in masonry, brick, block, tile, metal, wood and plastic. For marble we recommend a natural stone bit. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Répondue par: BoschTools
Date de publication: 2021-07-08

Can these masonry drill bits be used on Hardie siding?

Can these masonry drill bits be used on Hardie siding?
Posée par: Edinaman
I think so. I had used regular drill bits on Hardie plank.
Répondue par: Daniel
Date de publication: 2021-07-08

How well do they work with impact gun ?

I have a makita brushless impact and dont want to purchase a hammering drill unless i have to
Posée par: Curt
Hi there! This MP500T Daredevil Bit has a hex shank and impact rated – allows use in impact drivers and hammer drill/drivers for added versatility. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Répondue par: BoschTools
Date de publication: 2021-03-08

Is this the cheap "made in china" set or the made in germany quality set? I purchased years ago a...

Is this the cheap "made in china" set or the made in germany quality set? I purchased years ago and now need a new set. I DO NOT WANT CHINESE GARBAGE, thank you
Posée par: ter
Hi there! We apologize about the issue you had with the. Yes, you are correct, this MP500T Drill Bit country of origin is China. Robert Bosch Tool Corporation utilizes a global manufacturing strategy, which incorporates a global network of suppliers with our worldwide manufacturing locations such as Asia, Europe, and the United States. Our manufacturing facilities around the globe are all owned and operated by the Bosch Group and maintain the highest quality standards. You can be assured that whatever country your Bosch product was made in, it will be made with the quality you would expect from Bosch. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Répondue par: BoschTools
Date de publication: 2021-01-22

Are these intended for use with a drill driver or impact driver?

I'd rather not invest in a hammer drill right now if avoidable. Will a drill driver or impact driver work fine with these bits? Thanks!
Posée par: Dave
Impact Driver.
Répondue par: Biglou72
Date de publication: 2021-01-20

Are they good for drilling ceramic tile?

Are they good for drilling ceramic tile?
Posée par: Charles
yes
Répondue par: tada
Date de publication: 2020-08-10

What are the 5 sizes 1/8 3/16 1/4 5/16 3/8 ?

Posée par: Ch
The MP500T Multipurpose Drill Bit Set comes with (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 4" x 6", (1) 5/16" x 4" x 6", (1) 3/8" x 4" x 6" sizes. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Répondue par: BoschTools
Date de publication: 2020-07-02

will these drill solid hardened steel?

will these drill bits drill through very hardened steel? lile really really tough stuff?
Posée par: sruli
No. These are for concrete and tile
Répondue par: tada
Date de publication: 2020-06-25
  • y_2022, m_8, d_10, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_30
  • loc_fr_CA, sid_1001010534, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 163ms
  • QUESTIONS, PRODUCT