NOS PRIX SONT IMBATTABLES. NOUS LE GARANTISSONS.Certaines conditions s’appliquent

Bosch Foret pour marteau perforateur SDS-plus<sup>®</sup> Bulldog™ de 1/2 po x 6 po

Modèle nº HC2081|Nº UGS 1000403516

Aperçu
Spécifications
Évaluations

Aperçu

Modèle # HC2081 Internet # 1000403516

Pointe au carbure offrant une durée de vie prolongée lors dutilisations exigeantes. La pointe centrée permet de démarrer rapidement dans le béton. La marque dusure prévient lutilisateur lorsque la pointe est plus usée que les normes prévues par lANSI. Le foret reste plus frais grâce à sa conception à cannelures améliorée.

  1. Procédé de brasage et de trempage optimisé pour une durée de vie prolongée
  1. 15 % plus rapide (comparé au S4L)
  1. La pointe en carbure fabriquée par Bosch est plus robuste et dure plus longtemps sous d'importantes charges
  1. Le procédé de trempage exclusif de Bosch permet à chaque foret de percer plus de trous
  1. Idéal pour les travaux d'ancrage et d'insertion dans le béton

Spécifications

Dimensions

Hauteur assemblé
.80
Hauteur de l’emballage (en pouces)
0.8
Largeur assemblée
.08
Largeur de l’emballage (en pouces)
0.08
Poids assemblé
.85
Poids de l’emballage (en livres)
0.85
Profondeur assemblé
.06
Profondeur de l’emballage (en pouces)
0.06

Détails

Article individuel, Ensemble
Article individuel
Diamètre de la mèche (en po)
1
Longueur de la mèche (en po)
6
Matériau de la mèche
Goupille fendue
Nombre de pièces dans l'ensemble
1
Pays d'origine
DE-Germany

Garanties et certifications

Pour de plus amples informations sur les garanties, prière de contacter le service à la clientèle au 1-800-387-8304.
Foret pour marteau perforateur SDS-plus<sup>®</sup> Bulldog™ de 1/2 po x 6 poPhoto of productPointe au carbure offrant une durée de vie prolongée lors dutilisations exigeantes. La pointe centrée permet de démarrer rapidement dans le béton. La marque dusure prévient lutilisateur lorsque la pointe est plus usée que les normes prévues par lANSI. Le foret reste plus frais grâce à sa conception à cannelures améliorée.
Bosch
1000403516
Foret pour marteau perforateur SDS-plus ® Bulldog de 1/2 po x 6 po est évalué 4.1 de 5 de 13.
  • y_2019, m_10, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_fr_CA, sid_1000403516, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 117ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Excellent bit - even outlasted by cordless hammer drill! I recently built a concrete block wall and needed to drill a 1/2" hole through each block for rebar. I decided on this drill bit instead of the slightly more expensive 'Extreme' version and it handled drilling a 4" deep home in over 60 concrete blocks with ease. It was still going strong on the 60th block. Even though the drill bit has the special Slotted Drive System/SDS grooves in the end, I found that you can still use it in a regular drill chuck if you make sure the drill is centered properly in the chuck. I started off using the bit in my cordless 18V hammer drill and the cordless drill motor self destructed after about 45 blocks, so this $8 drill outlasted a $300 hammer drill!! I then switched over to a 110V corded SDS drill and it continued to eat through the remaining blocks with ease. Since each block was 4" thick and I drilled through 60 of them, I can safely say that this drill bit will drill through at least 20 linear feet of concrete with more to spare, so its good value for money for the average DIYer.
Date de publication: 2016-09-12
Rated 3 de 5 de par Adequate The bit came with a rubberized coating over the tip but even through the coating I could see the dull edge. I used it in my hammer drill for about 50 holes in concrete. As you would expect it was slow but it held up fine and didn't get any worse. I have powerful drill and it would make a hole even if the bit was ground to a stub so I wasn't too worried about it. Even a sharper drill would have been dull after 10-15 holes anyway.
Date de publication: 2016-08-16
Rated 5 de 5 de par great bit great bit no complaints. went throw a solid concrete wall
Date de publication: 2016-08-09
Rated 5 de 5 de par Excellent Concrete Drill Bit Had to install some concrete anchors, this drill bit got the job done easy....glad i bought it.
Date de publication: 2016-06-28
Rated 5 de 5 de par SDS Carbide Shank Hammer Drill Bit Excellent Bit drilled throw 3 inch concrete in a few seconds, could not ask for better, thanks Home depot!
Date de publication: 2016-04-27
Rated 1 de 5 de par not long lasting drill bit this drill bit broke 5 minutes into the job hit a knot in the board and broke
Date de publication: 2015-12-09
Rated 5 de 5 de par The cutting of this product is awesome I have use other cement bits and they did not work like this one always had problems cutting, not this one it cut like cutting butter drill the hole very fast with no problems at all very nice
Date de publication: 2015-12-08
Rated 5 de 5 de par High quality; works well. I have severa bits frrom HD. The bit is well made, sharp and easy to attach to the drill. The holes drilled in heavy concrete were done quickly and quite easily.
Date de publication: 2015-11-11
  • y_2019, m_10, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_fr_CA, sid_1000403516, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 54ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 75ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
<?xml version="1.0" encoding="utf-8"?>