Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

Bosch Lame plongeante au carbure de 1-1/4 po Starlock

Modèle nº OSL114C|Nº UGS 1001063342

Aperçu

Modèle # OSL114C Internet # 1001063342

Les accessoires pour outils polyvalents oscillants Bosch Starlock possèdent une empreinte en étoile conçue pour obtenir une intégration parfaite entre l'outil polyvalent et l'accessoire. Il s'agit d'une nouvelle dimension de couple pour les outils oscillants polyvalents. En utilisant une forme tri-dimensionnelle au lieu d'une interface plate, Starlock fournit le plus grand transfert de couple, des vibrations réduites et la capacité pour des applications plus performantes. Cesaccessoires continuent d'être compatibles OIS et s'adaptent aux outils existants, ainsi qu'à la nouvelle génération d'outils à haute performance Starlock. Les accessoires polyvalents Bosch sont fabriqués en Suisse afin de fournir la précision et la durabilité nécessaires pour les applications professionnelles les plus exigeantes. Bosch a une tradition d'innovation : y compris les systèmes à queue SDS-plus et SDS-max pour les marteaux à béton et l'interface de lame standard professionnelle à queue en T pour les scies sauteuses.

  1. Dents en carbure pour des performances supérieures dans le métal et dans les autres matériaux
  1. Durée de vie 30 fois supérieure aux lames standards bimétalliques
  1. Interface à code couleur et lame gravée au laser pour une identification rapide de la bonne lame
  1. Interface Starlock pour des performances professionnelles, utilisable aussi sur les outils compatibles OIS y compris ceux des marques Bosch, Fein, Milwaukee, Makita, Rigid et autres
  1. Lame de précision fabriquée en Suisse

Spécifications

Dimensions

Hauteur assemblé (en pouces)
6.5
Hauteur de l’emballage (en pouces)
6.5
Largeur assemblée (en pouces)
3.79
Largeur de l’emballage (en pouces)
3.79
Poids assemblé (en livres)
0.09
Poids de l’emballage (en livres)
0.09
Profondeur assemblé (en pouces)
0.55
Profondeur de l’emballage (en pouces)
0.55

Détails

Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Universel
Idéalement utilisé avec
Scies circulaires
Interface
Dos fermé
Matériau de la lame
Carbure
Nombre de pièces dans lensemble
1
Pays d'origine
CH-Switzerland
Type d'accessoire pour outils à moteur
Accessoires pour outils à mouvement oscillatoire
Type d'accessoires pour outils à mouvement oscillatoire
Candélabre
Type d'applications
Coupe
Type de tige
SDS-Max

Garanties et certifications

Défauts du produit uniquement
Lame plongeante au carbure de 1-1/4 po StarlockBosch Lame plongeante au carbure de 1-1/4 po StarlockLes accessoires pour outils polyvalents oscillants Bosch Starlock possèdent une empreinte en étoile conçue pour obtenir une intégration parfaite entre l'outil polyvalent et l'accessoire. Il s'agit d'une nouvelle dimension de couple pour les outils oscillants polyvalents. En utilisant une forme tri-dimensionnelle au lieu d'une interface plate, Starlock fournit le plus grand transfert de couple, des vibrations réduites et la capacité pour des applications plus performantes. Cesaccessoires continuent d'être compatibles OIS et s'adaptent aux outils existants, ainsi qu'à la nouvelle génération d'outils à haute performance Starlock. Les accessoires polyvalents Bosch sont fabriqués en Suisse afin de fournir la précision et la durabilité nécessaires pour les applications professionnelles les plus exigeantes. Bosch a une tradition d'innovation : y compris les systèmes à queue SDS-plus et SDS-max pour les marteaux à béton et l'interface de lame standard professionnelle à queue en T pour les scies sauteuses.
Bosch
1001063342
CAD29.982022-09-28
Home Depot Canada
Lame plongeante au carbure de 1-1/4 po Starlock est évalué 4.9 de 5 de 14.
  • y_2022, m_9, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_fr_CA, sid_1001063342, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 55ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Bosch 1-1/4 in. Starlock Carbide Plunge Blade [This review was collected as part of a promotion.] This Swiss made blade is a “metal & more” heavy duty Carbide Extreme Blade. It features The Bosch Starlock interface and it provides a 3-dimensional fit designed to produce the highest-torque transfer, reduced vibration and the ability for higher performance applications. Color coding and laser etched blade allows quick indentification. Blade is compatible with OIS (Oscillating Interface System. This blade cuts through nails like butter and showed no signs of wear after a few nails. This should last close to the 30x the life of ordinary bi-metal blades. Time will tell. Comes in multi packs of 2 and 3.
Date de publication: 2016-11-26
Rated 5 de 5 de par Invaluable Tool I used this handy blade for the 1st time to disassemble insect damaged window flower boxes. I was able to save the good pieces of decorative cedar while cutting through the damaged wood & rusted nails & screws with ease & little apparent wear to the carbide teeth. The job would have eaten up any other non-carbide oscillating blade I own from Bosch & other makers. I can't think of another tool that could do this job of cutting metal & wood with minimum cosmetic damage & minimum effort. I am also going to buy the 1 3/4 inch carbide blade for making wide or longer straight cuts in hardwood or wood with metal fasteners,
Date de publication: 2015-06-09
Rated 5 de 5 de par The blade I've been waiting for! [This review was collected as part of a promotion.] I've had my multi-tool for several years now, and gone through numerous blades. I asked myhself 'Where's the carbide blade?' Finally, it's here - and it does a great job. No doubt about the quality - it's a Bosch product. I've used it as a trial to cut off a #12 sheet metal screw which it did in fine order without any visible sign of dulling the blade. I had the screw in a vise, but the beauty of the tool system is that it will do the same cut in place with limited access. I can see this being my 'go to' blade for my multitool. The only down side to the blade is that the arbor fully encircles the securing bolt - you have to fully remove the bolt to install this cutter.
Date de publication: 2016-10-31
Rated 5 de 5 de par This is a Bosch blade and fits on my Ryobi Job Tool without the need of an adapter. There is alwa... [This review was collected as part of a promotion.] This is a Bosch blade and fits on my Ryobi Job Tool without the need of an adapter. There is always something that is sticking up that hampers the job that you are trying to do. I had someone remove a piece of drywall so that they could inspect the wall behind it. The thing is he left the nails sticking out of the wood so that the drywall could not be replaced. I needed something to cut the nails off (they weren't going to be pulled out) so that I could replace and repair the drywall. This blade cut the nails off with ease and the drywall was repaired.
Date de publication: 2017-07-25
Rated 5 de 5 de par Quality, long life blade is OIS compatible with many models of oscillating tools. [This review was collected as part of a promotion.] As this Bosch Carbide blade for oscillating multi-tool is rated to cut metal, it should last a long time if not mistreated. The cut-depth gauge is a useful feature. The Swiss-made blade has the 3-D Starlock interface and is reported to be OIS compatible. The design requires the arbor-bolt be removed to change blades. I can report that this does fit a Chicago Electric mdl-68303 tool, but only with the "raised interface" towards to tool.
Date de publication: 2017-06-27
Rated 4 de 5 de par I put this blade through the ringer doing a bathroom remodel and found nothing it wouldn't cut, a... [This review was collected as part of a promotion.] I put this blade through the ringer doing a bathroom remodel and found nothing it wouldn't cut, and cut quickly. Drywall (well that was a gimme), plaster will dull a blade rather quickly, not this blade. Studs, ok, a little time, but still not a problem. Nails? quicker than expected. Surprisingly, grout was not a problem, it did have trouble with tile but that was pushing it and expecting to much. Great all purpose + metal blade.
Date de publication: 2017-08-09
Rated 5 de 5 de par Best blade I have used [This review was collected as part of a promotion.] These Bosch blades are the best I have used. While they are pricey they are worth it. I have used generic as well as big name products for my multi-tool projects and the carbide Bosch plunge blades last for at least twice as many cuts before slowing down. The occasional undetected nail doesn't destroy cutting effectiveness immediately like it does with just about any other blade I've used - big plus! Highly recommended
Date de publication: 2017-07-02
Rated 5 de 5 de par This is one fine blade! Other blades I've used did not last very long. I've used this blade to cu... [This review was collected as part of a promotion.] This is one fine blade! Other blades I've used did not last very long. I've used this blade to cut hard maple, walnut and copper pipe and it cut beautifully. The carbide tip has not shown any wear. The plunge feature is a great asset. It cuts straight and doesn't wander off course. This is a blade that can be used for every thing I've tried. No need to have a variety of blades for different tasks.
Date de publication: 2017-07-14
  • y_2022, m_9, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_fr_CA, sid_1001063342, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • REVIEWS, PRODUCT

Will these blades cut 1/2" galvanized iron water pipe?

Will these blades cut 1/2" galvanized iron water pipe?
Posée par: RobS
Hi there! This OSL114C Oscillating Blade is designed to cut through iron bar, black pipe, metal (nails and staples), wood with nails, drywall and ceramic tile. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Répondue par: BoschTools
Date de publication: 2020-08-05

Will these blades fit fien multi master tool

Posée par: Herm
The Bosch OSC114C Plunge Blade is designed to work with the Bosch 12 pin Oscillating Interface System (OIS). However the Bosch OIS001 adapter allows Bosch accessories to fit on most oscillating multi-tools.
Répondue par: BoschTools
Date de publication: 2015-09-20

will this fit on a Rigid oscillating tool?

Does it require the use of an adapter?
Posée par: CrazyJoe
Thank you for your question. The Bosch OSC114C has an OIS Interface System that keeps the 12 pin design and ensures optiumum power transfer and universal fit for pro tools without an adapter.
Répondue par: BoschTools
Date de publication: 2015-09-20
  • y_2022, m_9, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_fr_CA, sid_1001063342, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 97ms
  • QUESTIONS, PRODUCT