L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # RA1171 Internet # 1001388291

La table de toupie RA1171 de Bosch présente une conception de type armoire avec une surface de travail laminée lisse pour le travail de précision du bois, ce qui en fait une solution d'établi idéale pour tout atelier. La construction de type armoire est idéale pour la stabilité, le rangement et le dépoussiérage. Sa plaque de montage de défonceuse en aluminium rigide est pré-percée pour une compatibilité avec une variété de défonceuses et pour un réglage de la hauteur au-dessus de la table avec de nombreuses défonceuses courantes. Le guide haut permet de manipuler des pièces plus grandes, tandis que les plastrons et les cales en MDF réglables maximisent la précision et la polyvalence. Elle est également équipée d'un orifice de collecte de la poussière au niveau du guide et d'un autre au niveau de l'armoire, pour une gestion optimale de la poussière.

  1. Grand guide en aluminium avec plaques ajustables en MDF de 4-7/8 po x 25-1/8 po pour supporter les pièces de grandes dimensions
  1. Plaque de fixation de la toupie en aluminium rigide Elle reste plane et précise pour offrir de l'exactitude et elle est prépercée pour convenir à une variété de toupies
  1. Peignes presseurs faciles à utiliser. Deux peignes presseurs ajustables à fixer au guide longitudinal et à la table pour offrir un guidage et une protection antirecul supplémentaires
  1. Le logement pour accessoires permet de ranger un peigne presseur et des accessoires optionnels de 3/4 po, p. ex. un guide d'onglet
  1. Deux raccords d'aspiration de poussière pour tuyaux d'aspirateur standard de 2-1/2 po

Spécifications

Dimensions

Hauteur assemblé (en pouces)
4.5
Hauteur de l’emballage (en pouces)
4.5
Largeur assemblée (en pouces)
23.75
Largeur de l’emballage (en pouces)
23.75
Poids assemblé (en livres)
46.66
Poids de l’emballage (en livres)
46.66
Profondeur assemblé (en pouces)
27
Profondeur de l’emballage (en pouces)
27

Détails

Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Universel
De batterie inclus
Non
Idéalement utilisé avec
Scies à carreaux
Nombre de pièces dans l'ensemble
1
Pays d'origine
CN-China
Portatif ou fixe
Portatif
Type d'accessoire pour outils à moteur
Pièces et accessoires pour toupies
Type daccessoire
Plaque d'assise pour toupie

Garanties et certifications

Limité à 1 an
Table de toupie stratifiée de 25 1/2 po x 15 7/8 po avec orifices de collecte de poussièreBosch Table de toupie stratifiée de 25 1/2 po x 15 7/8 po avec orifices de collecte de poussièreLa table de toupie RA1171 de Bosch présente une conception de type armoire avec une surface de travail laminée lisse pour le travail de précision du bois, ce qui en fait une solution d'établi idéale pour tout atelier. La construction de type armoire est idéale pour la stabilité, le rangement et le dépoussiérage. Sa plaque de montage de défonceuse en aluminium rigide est pré-percée pour une compatibilité avec une variété de défonceuses et pour un réglage de la hauteur au-dessus de la table avec de nombreuses défonceuses courantes. Le guide haut permet de manipuler des pièces plus grandes, tandis que les plastrons et les cales en MDF réglables maximisent la précision et la polyvalence. Elle est également équipée d'un orifice de collecte de la poussière au niveau du guide et d'un autre au niveau de l'armoire, pour une gestion optimale de la poussière.
Bosch
1001388291
CAD3282024-02-20
Home Depot Canada
Table de toupie stratifiée de 25 1/2 po x 15 7/8 po avec orifices de collecte de poussière est évalué 4.1 de 5 de 184.
  • y_2024, m_2, d_19, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_14, tr_170
  • loc_fr_CA, sid_1001388291, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 81ms
  • REVIEWS, PRODUCT
Rated 3 de 5 de par Fence adjustments and hold downs... This router works well with relatively small parts if you're not expecting perfect results. My main issue with the design is the way the fence is adjusted and held in place. I can't believe Bosch didn't use T Tracks to adjust and lock down the fence. I've ruined two projects on this router due to the fence appearing to be properly locked down... but... not so much. One of the two bolts was cocked a bit under the table and when pressure was put on the fence, the fence moved. I'm in the process of routing out the back of the table in order to install T Tracks to correct this problem. Also, as others have mentioned. It would have been nice to have the graduations on the fence be a bit finer.
Date de publication: 2019-01-19
Rated 4 de 5 de par Great for the money An excellent router table for the price point. I looked at all the major bench top router tables, Benchdog, Kreg, Bosch RA1181, before selecting this one, and I'm happy with my choice. It's built sturdy and is flat and square. I liked that this RT was a cabinet style with an external 2 plug on/off switch. The fence is surprisingly sturdy and straight. I was a little disappointed in the router plate, it's nice that it's Al, but it's cast Al, which makes it feel a little cheaper, but it's sturdy and can't complain for the price. If you have the time/money/space, I'd recommend getting a full size router table top and building a table under it, but this little table is perfect for my needs for now.
Date de publication: 2014-01-21
Rated 5 de 5 de par This is much larger than I thought it would be from seeing the pictures. It's very sturdy and wel... This is much larger than I thought it would be from seeing the pictures. It's very sturdy and well made. I bought it as a back-up to my full-size router table and I think it's going to be a great addition to the shop. I already owned the Bosch 1617EVS router with fixed and plunge bases. I bought the Bosch RA1165 Under-Table Router Base so that I would have height adjustment from the table top. Now it's just a simple matter of removing the 1617 motor from its base and inserting it into the RA1165 base which is permanently mounted to the table. Quick and easy. This is a well designed, rugged tool and I'm sure I'll get many years of good use from it. Highly recommened.
Date de publication: 2017-11-07
Rated 5 de 5 de par Great table for the price Overall it is a very good table. Went together very easy using the included instructions. The only issue I have had is the insert leveling screws move by themselves when moving or using the table. I had to add some pipe thread tape to the threads to help hold them in place. If this don't work then I will put a small drop of thread locker on them. Once it is leveled, it should not have to be adjusted. I am using it with a Harbor freight plunge router. It mounted right up with no modifications. I have been using it with jig templates, flush cut bits and chamfer bits. Works great.
Date de publication: 2016-03-19
Rated 5 de 5 de par Great router table I have been using this router table for awhile now. It was easy to set up and use. The only thing I would change is how the fence attaches to the table. Instead of the 1/4 x 20 carriage bolts that go into a slot in the top, I would put t tracks on each side closer to the edge of the top with 1/4 x 20 hex or t bolts that way it would be easier to adjust.
Date de publication: 2017-08-17
Rated 3 de 5 de par Sturdy Table Have been using for several weeks and found two cons: 1) The fence has two independent lock down bolts making it tedious to set correctly. the marks on the table don' t seem to align the fence parralell. Have to measure from the face to a fixed point on the table for exact setting. 2) The router mounting plate is below the table surface by about 0.025 - 0.030" which causes a slight difference in cuts, especially noticable when I used a dove tail jig. I plan to level the insert with shim stock. The accessory insert that according to the manual is used to adapt routers not listed, is not available - never released according to Bosch. Other than this it is a good table for intermittent use.
Date de publication: 2013-09-25
Rated 5 de 5 de par RA1171 Router Table A great product for the home wood worker. I used this in combination with my Bosch router but looking at the connection plate I would assume that it would work with other brands. Once you get over the setup (this product must be fully assembled) and the learning curve on how to use the fence you should be able to do almost anything that you could want to with a router, including dovetail joints. Obviously this would not work as well as a dedicated dovetail jig but if you know what to do you can get them done. I have yet to find something that I can not do with this table.
Date de publication: 2012-12-19
Rated 3 de 5 de par This product has great quality but is not as adaptable to other routers than Bosch. The table itself it great, but I am disappointed with its ability to handle a different brand router. The locations for my router mounted it to left of center, making it difficult to use larger bits. I had to redrill the mounting plate to make it fit my machine, even though it was listed specifically by model number. I am disappointed. Once retro-fitted, it works great. Just like I thought, but a lot of re-engineering to get there.
Date de publication: 2013-09-21
  • y_2024, m_2, d_19, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_14, tr_170
  • loc_fr_CA, sid_1001388291, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Will a Porter Cable 8902 fit this table?

Will a Porter Cable 8902 fit this table?
Posée par: Pcb
Thank you for your inquiry. The RA1171 router table works with Porter Cable model numbers 690 series, 7529 plunge router and 892-895 series (fixed base only). For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Répondue par: BoschTools
Date de publication: 2023-05-04

Will a craftsman router mount to this table

Posée par: Keith
Bosch has predrilled mounting templates for most common routers. They have those listed in their guide manual. Was easy to set up. I used template for my Porter Cable router and lift. 
Répondue par: Rick
Date de publication: 2023-05-07

It’s saying the width is bigger than the length but it doesn’t look that way in the picture is this accurate measurement

Posée par: Greg
Thank you for your question. The RA1171 Router Table dimensions are 25.5" W x 15 7/8" L x 14 1/2" H. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Répondue par: BoschTools
Date de publication: 2023-05-05

Compatible with a Makita RF1101?

Compatible with a Makita RF1101?
Posée par: OldHippyWoodworker
Definitely. That router is listed in the owner's manual. The manual will tell you which set of router plate pre-drillrd holes to use for your router.
Répondue par: BobM
Date de publication: 2023-05-05

Why does my medal plate on the top of the table sit about 1/16 lower then the wood table top?

Posée par: Greg
It can easily be adjusted to fit flush... See the documentation...
Répondue par: GilGomesJr
Date de publication: 2023-05-06

Does the power switch have extra outlet to plug in vacuum?

Posée par: Ruler
Yes, the power switch has an extra outlet to plug in a vacuum.
Répondue par: Communityanswer
Date de publication: 2023-05-06

How tall is the table when put together from the floor up.

How tall is the table when put together from the floor up.
Posée par: Lisa
It is approx. 14 inches high. You need to have or build a stand for it to get to work height.
Répondue par: xbeeguy
Date de publication: 2023-05-05

will my Makita 3612 router work with this table?

Posée par: BigT300
The only Makita routers listed are the RF1100, RF1101. The manual says that for routers not listed, you should buy the RA1186 adapter plate. Unfortunately, Bosch never made that part. So, I think it would be a iffy. You might find holes that will line up or you might not. I will tell you that it's a good table and works great with the Bosch 1617EVS router.
Répondue par: BobM
Date de publication: 2023-05-05
  • y_2024, m_2, d_19, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_138
  • loc_fr_CA, sid_1001388291, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 75ms
  • QUESTIONS, PRODUCT