Articles pour l’extérieur et terrasses Bois de construction et composite Climatisation et chauffage Cuisine Cuisson à l'extérieur et barbecues Décor et Meubles Électricité Électroménagers Entretien de la pelouse et du jardin Luminaires et ventilateurs de plafond Maison intelligente Matériaux de construction Organisation et entreposage Outils Peinture Plomberie Portes et fenêtres Produits nettoyants Quincaillerie Revêtements de sol Salle de bain Stores et Parures de fenêtre Terrasses Tous les départements Événement Faites de la place Événement À pleine charge
Achetez en ligne et ramassez en magasin ou dans le stationnement  En savoir plus
California Air Tools SPRAYIT SP-352 Pistolet pulvérisant à alimentation par gravité avec coupe pivotante en aluminium

California Air Tools SPRAYIT SP-352 Pistolet pulvérisant à alimentation par gravité avec coupe pivotante en aluminium

Modèle nº SPRAYIT SP-352|Nº UGS 1000750140

Aperçu

Modèle # SPRAYIT SP-352 Internet # 1000750140

Le pistolet pulvérisant à alimentation par gravité SPRAYIT SP-352 peut être utilisé pour diverses applications telles que automobile, industrielle, maritime et travail du bois. Le corps monobloc en aluminium léger du pistolet permet de travailler très facilement avec ce pistolet pulvérisant. La coupe pivotante en aluminium permet de faire pivoter le pistolet afin de pulvériser dans des endroits difficiles à atteindre. Le pointeau en acier inoxydable et la buse sont résistants à la corrosion. La dispersion du fluide par le ventilateur et les contrôles d'air séparés ajustables rendent la diffusion par le ventilateur plus précise et réduisent le gaspillage. La marque SPRAYIT construit des outils de qualité depuis 1928.

  1. SPRAYIT SP-352 Pistolet pulvérisant à alimentation par gravité avec coupe pivotante en aluminium
  1. Corps du pistolet une-pièce en aluminium léger avec récipient en aluminium de 13,5 oz/0,4 L
  1. Dispersion de fluide distincte et ajustable par ventilateur et régulateurs d'admission d'air pour une application précise
  1. Dimension de l'embout : 1,5 mm Consommation d'air de 4,2 à 6,0 CFM à 30 PSI - Pression d'utilisation 44/58 PSI - Pression maximale 60 PSI
  1. Dispersion par ventilateur : 5,5 po à 7,5 po
  1. Parfait pour vernis-laques, émaux, uréthane et peintures à séchage rapide et basse viscosité

Spécifications

Dimensions

Hauteur assemblé (en pouces)
11
Hauteur de l’emballage (en pouces)
11
Largeur assemblée (en pouces)
6
Largeur de l’emballage (en pouces)
6
Poids assemblé (en livres)
1.4
Poids de l’emballage (en livres)
3
Profondeur assemblé (en pouces)
4.5
Profondeur de l’emballage (en pouces)
4.5

Détails

Pays d'origine
CN-China
Type de distribution des liquides
Gravité

Garanties et certifications

Comprend clé à molette, brosse et douille supplémentaires
SPRAYIT SP-352 Pistolet pulvérisant à alimentation par gravité avec coupe pivotante en aluminiumCalifornia Air Tools SPRAYIT SP-352 Pistolet pulvérisant à alimentation par gravité avec coupe pivotante en aluminiumLe pistolet pulvérisant à alimentation par gravité SPRAYIT SP-352 peut être utilisé pour diverses applications telles que automobile, industrielle, maritime et travail du bois. Le corps monobloc en aluminium léger du pistolet permet de travailler très facilement avec ce pistolet pulvérisant. La coupe pivotante en aluminium permet de faire pivoter le pistolet afin de pulvériser dans des endroits difficiles à atteindre. Le pointeau en acier inoxydable et la buse sont résistants à la corrosion. La dispersion du fluide par le ventilateur et les contrôles d'air séparés ajustables rendent la diffusion par le ventilateur plus précise et réduisent le gaspillage. La marque SPRAYIT construit des outils de qualité depuis 1928.
California Air Tools
1000750140
CAD31.772022-08-12
Home Depot Canada
SPRAYIT SP-352 Pistolet pulvérisant à alimentation par gravité avec coupe pivotante en aluminium est évalué 4.1 de 5 de 52.
  • y_2022, m_8, d_11, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_48
  • loc_fr_CA, sid_1000750140, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 76ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par This is the one exception I bought this gun the other week to spray a project truck, I read good reviews about it but I was not sure of the quality due to the price. I will say for the price this gun shoots cleaner and smoother then my more expensive gun, this is the one exception " you get what you pay for" because you get a quality gun at a cheap price. The gun is light, feels good and the quality seams very good, my only one dislike is the bowl is on the side and not the top so it felt kind of awkward to me at first. Also it says this gun is a hvhp gun but I am using a 24 gallon tank with a 2.4 hp motor and have had no issues.
Date de publication: 2015-03-12
Rated 5 de 5 de par Wish I had bought one sooner I have done a lot of woodworking projects over the years and have used brush on lacquer (Deft) with good results, but it takes a lot of time ane effort to achieve a smooth finish. Tried this sprayer to use with the air compressor for my Bostitch nail gun (2.1 cfm @90 psig, 6 gal tank). It works for me, but I would consider this the absolute minimum requirement or you will not have not have enough air pressure. The sprayer is easy to use (I've never owned one) and has saved me a lot of time.
Date de publication: 2015-02-01
Rated 2 de 5 de par Overall, the spray gun performs OK. Did not like the ease with which the paint reservoir/cup fell... Overall, the spray gun performs OK. Did not like the ease with which the paint reservoir/cup fell off. The interface tolerance between the 2 needs to be tighter. Wound up using painters tape to hold it in place. (Just make sure you do not cover the vent hole.) Otherwise a very human reaction may make the user spill the cup all over the place. Since this is obviously an import, the owners manual was of some, but limited, value. The parts diagrams did not correlate to the parts on the gun by number in the diagram. Also, the terminology varied and one part was not even shown that is discussed in the text. I can recommend this gun for an amateur but would not do so if you want a well painted part or have to disassemble it for repair or cleaning. Also, the manufacturer could tighten up the compression between the cup lid and the walls of the cup for a tighter fit.
Date de publication: 2017-05-09
Rated 4 de 5 de par great sprayer/great price This was a great purchase, the only reason I didn't give it a 5 stars instead of a 4 is because it does have a lot of intricate little parts that have to be taken apart and cleaned every time it is used, and the place where the paint is being held on the gun doesn't seem to be the absolute most convenient spot. But, it didn't sputter or have any problems with giving us even coats. I am so glad I didn't have to pay much in order to get such a nice finish on our furniture!
Date de publication: 2015-08-18
Rated 3 de 5 de par Close But No Cigar I had high hopes that this little spray gun would earn a place in my stable of gravity feed sprayers. What attracted me was the low profile cup design. An added feature is the cup swivels to reach into tight spots. On the negative side, the spray pattern is almost round, rather than a typical fan pattern, even when adjusted for max. fan width. Second the cup lid is absolutely horrible. It is a friction fit metal-to-metal connection so it leaks like a sieve. I mean I had lacquer pouring out the top at one point. I'm glad I was trying the gun on scrap, and not an important project. Basically the gun is unusable as it comes in the box. I will look for a replacement cup, but since it attaches to the side it is non-standard. Otherwise one would have to devise a seal around the existing cup lid. This is tricky though, because the seal material would have to resist chemical exposure. Maybe nothing more than a chemical resistant glove stretched around the cup lid? It will take some experimenting to get this gun working. Until then I will continue to use my Porter Cable PSH1 gravity feed gun.
Date de publication: 2016-03-01
Rated 5 de 5 de par Great little spray painter This paint sprayer is super easy to use and the paint comes out in a fine mist. I used it to paint dining furniture. It did a beautiful job. I'll never buy spray paint cans again!!
Date de publication: 2014-09-24
Rated 5 de 5 de par One of my top purchases This spray gun is inexpensive and works like a top dollar sprayer. One of my best buys. The atomization is excellent. I am not a professional painter, but this tool paints like I was. I do have a high output compressor though, this may be the reason. The three control knobs can be adjusted for a precise spray pattern, amount, and accuracy. I really did not know if this was going to be worth it, but it is. If you are looking and thinking of buying a sprayer, just stop and buy this one. The only thing to complain about was the condition of the product packaging when I picked it up at the site to store. I order online and the original packaging was replaced with UPS packaging and the instructions were not with the item. I had to download them online from an independent site.
Date de publication: 2015-05-26
Rated 4 de 5 de par this is a good all around paint gun,painted the Gavebo in the back yard (12x12 with to sides in 1hour). would have done it faster dut had to fill it . If you buy one,get a inline gage to keep the ail right, it is a very good spray gun and reel easy to clean
Date de publication: 2014-07-01
  • y_2022, m_8, d_11, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_48
  • loc_fr_CA, sid_1000750140, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 143ms
  • REVIEWS, PRODUCT

Would this work to paint deck railing before mounted on the deck? Don't want to invest a lot in...

Would this work to paint deck railing before mounted on the deck? Don't want to invest a lot in one for this small project.
Posée par: Betty
For a deck I think this is the right use this product if?you are using stain. It will take a long time because is a small paint cup, unless is a small deck. Good luck
Répondue par: Carlos
Date de publication: 2021-06-02

I lost my instructions. How do you clean this? Or where are instructions online?

I lost my instructions. How do you clean this? Or where are instructions online?
Posée par: bh
I poured the paint from the paint cup back into the paint can and removed it from the sprayer. I flushed the gun with the compressor into the same can. Then reconnected a somewhat rinsed cup back to sprayer filled with water and flushed the gun into a 5 gallon bucket until the gun was clean. Next, I made sure all parts of gun were paint free and then ran a little mineral spirits through it to prevent corrosion, as suggested in handbook.
Répondue par: Martin
Date de publication: 2020-02-04

Can I use this srayit using Minwax stain with polyurethane and do I need to thin ?

Posée par: Woodsolve
Stain should be fine. You may need to thin poly a little. However, I have sprayed water based poly without thinning.
Répondue par: Willy
Date de publication: 2020-01-30

Can this gun be used with water based latex paints, or only oil based paints.

Can this gun be used with water based latex paints, or only oil based paints.
Posée par: Paul
Yes. But, you will likely have to thin the paint more than it should be thinned.
Répondue par: Willy
Date de publication: 2020-01-30

What volume compressor is best? I have 1.5 gallon Campbell hausfield

Posée par: Jay
It depends on the cfm (cubic feet per minute) you compressor is capable of. The gun requires about 4 cfm. If your compressor is not capable of that, you can still use it but, you may have to stop once in a while to let the air tank fill up again.
Répondue par: Willy
Date de publication: 2020-01-30

What is the swivel range of the cup? Can I paint upside down (i.e. the underbody of a car)?

Posée par: pzcrx
Swivel range is 360 deg. By swiveling the cup so that it is always near vertical, you can point the gun in any direction.
Répondue par: Willy
Date de publication: 2020-01-30

How can it get the air to work? Do I need to by an air pump to provide air to this spray gun?

Posée par: rabbon
Thank you for the Interest in the SPRAYIT SP-352 Spray Gun. Yes, you need an air compressor to use this spray gun.
Répondue par: Larry
Date de publication: 2021-03-28

The online specifications state that it comes with 1.4 and 1.8 size tips. Are there two tips included?

What tip sizes come with it?
Posée par: Pete
I went out and checked the list of contents on the box. listed one tip @ 1.5 mm
Répondue par: JaunRamone
Date de publication: 2018-04-26
  • y_2022, m_8, d_11, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_35
  • loc_fr_CA, sid_1000750140, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 85ms
  • QUESTIONS, PRODUCT