L’événement Gonflé à bloc est en cours. N’attendez pas!  Magasiner l'événement.

Aperçu

Modèle # speb25 Internet # 1001002217

Les tubes en polyéthylène sont économiques et légers. Fabriqués au Canada. Applications générales: conduites d'eau, tuyaux d'adoucisseur d'eau, distributeurs automatiques, conduites pneumatiques par commande logique, transfert d'air et de liquides dans les applications industrielles. REMARQUE: La pression de service diminue à mesure que la température augmente. Les pressions nominales ne peuvent être obtenues qu'avec des applications de couplage appropriées.

  1. Résistant à beaucoup d'acides d'alcalis, de solvants et de combustibles
  1. Sans odeur, gouts, flexible, résistant à la fissuration, et leger
  1. Sans phthalate
  1. 1/4 po DE x 0.17 DI x 25 PI
  1. 6.4 mm DE x 1.6 mm DI x 7.62 M

Spécifications

Dimensions

Hauteur assemblé (en pouces)
8.5
Hauteur de l’emballage (en pouces)
2
Largeur assemblée (en pouces)
7.5
Largeur de l’emballage (en pouces)
6
Poids assemblé (en livres)
3.8
Poids de l’emballage (en livres)
0.3
Profondeur assemblé (en pouces)
24
Profondeur de l’emballage (en pouces)
6

Détails

Diamètre extérieur réel (en po)
1/4"
Diamètre intérieur nominal du tuyau (po)
1/4"
Diamètre intérieur réel (en po)
1/6"
Méthode de raccordement
À compression
Pays d'origine
CA-Canada

Garanties et certifications

1 an
Tube de Polyéthylène -0,17"diamètre intérieur x 1/4" diamètre extérieur x bobine 25 piCANADA TUBING Tube de Polyéthylène -0,17"diamètre intérieur x 1/4" diamètre extérieur x bobine 25 piLes tubes en polyéthylène sont économiques et légers. Fabriqués au Canada. Applications générales: conduites d'eau, tuyaux d'adoucisseur d'eau, distributeurs automatiques, conduites pneumatiques par commande logique, transfert d'air et de liquides dans les applications industrielles. REMARQUE: La pression de service diminue à mesure que la température augmente. Les pressions nominales ne peuvent être obtenues qu'avec des applications de couplage appropriées.
CANADA TUBING
1001002217
Tube de Polyéthylène -0,17"diamètre intérieur x 1/4" diamètre extérieur x bobine 25 pi est évalué 3.4 de 5 de 24.
  • y_2024, m_4, d_12, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_10, tr_14
  • loc_fr_CA, sid_1001002217, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 71ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par It works without a problem. Bought this about a month ago and it works without a hitch. However, I also initially experienced the problem some user did (i.e., tube bursting). Turned out that the problem is not the tube itself. The tube that bursts (exactly as described by many reviewer) is in reality the PVC tubing (item SVEBxx) instead of the Polyethylene (item SPEBxx). The PVC tubing is perfectly clear, but only rated 55PSI; this is not quite clear (overall color tends to a pale white), but is rated 165PSI (the one I found in store said 150PSI). Turned out that the two types of tube end up getting mixed in the store bins, so if you're not careful you can get the wrong type. To me, it has worked so far. I use it on a line controlled by a solenoid valve: every time the valve cycles, the tubing is subject to pressure surges; yet, in a month it didn't deform, developed a leak or any other defect despite going through several hundreds valve cycles.
Date de publication: 2014-12-14
Rated 1 de 5 de par Poor product This type of tubing is near worthless for any water line hook-up. I had a massive leak behind my refrigerator causing replacement of flooring, etc. It was a very fine pinhole leak over many months. The leak was at a bend in the tubing near the wall shut-off valve. Replaced the bend area with 90 degree compression fittings (which were not easy to match) at the bend at the bottom and the top. Thought everything was fine. Now another leak developed (another pinhole, about 18 months later) underneath the refrigerator (Kitchen-Aide built in, another poorly designed product), causing the same problem (destroyed wood floor, etc.). This piece didn't even have a kink, it just sprung a leak. Never use this stuff. Flexible stainless steel high pressure line is the way to go.
Date de publication: 2015-03-11
Rated 1 de 5 de par develops pin holes over time Let me try this again, first post was rejected by Home Depot. The plumbing manager at my Home Depot told me they encourage people NOT to use this, I wish I recored that conversation. 4 times over 12 months I got pin holes and water damage. Unfortunately I used a lot of this stuff. I called Watts also, they were nice enough and sending me braided lines for free for my damage and hassle. I wish I read all the reviews here, there are many people complaining of same thing. It's plastic made in China. So if water on floor is important not to happen, do not use this stuff. Not sure why Home Depot will not post this, it's fact. I left my phone number with Manager at Laguna Niguel Home depot if anyone wants to contact me. This is really bad stuff and could potentially do a lot of damage and in fact has if you just read other reviews.
Date de publication: 2015-04-08
Rated 1 de 5 de par Terrible - Sprung links after 3 days Deserves a NEGATIVE 10 rating. Installed under kitchen sink to connect the new ice maker water filter purchased from Home Depot. The filter is great. However, after 3 days, the tubing sprung 3 pin hole size leaks 1/4 inch behind the connector on top of the internal furl. It ruined the base and edge of the cabinet. I should have used the steel reinforced lines with preattached connectors (like the ones for the sinks) but these have to be special ordered (did not know they even existed for the ice maker in 1/4 size). Terrible, terrible experience. Will never buy another Watts product again. A ten dollar kit will cost several hundred dollars in repairs. Will be contacting local Home Depot manager for help.
Date de publication: 2014-06-26
Rated 1 de 5 de par Pinhole leak The Ice maker 1/4 poly supply line, while all where away on vacation, decided to spring a pinhole leak. Came home to find an absolute catastrophe. 3 floors of destruction. The poly pipe is not bent, cut, discolored or marked in any way. Bad quality control. I'm going to have this pipe inspected by a pro so that I can recover my Ins. Deductible
Date de publication: 2015-03-30
Rated 1 de 5 de par Leaks ! The inside diameter of this tubing is slightly bigger than a typical icemaker line. It's impossible to use a brass compression fitting on it because the compression sleeve easily slips in and out of the tube creating...no compression. I used this to connect a water dispenser to a main water line and it sprung an instant leak at the quick connect fitting. The fitting itself wasn't defective. Ended up purchasing a 25' white Everbuilt icemaker kit that has a thicker tubing and it worked just fine.
Date de publication: 2016-07-06
Rated 1 de 5 de par Garbage Agree with the above reviewer. I installed this product behind the refrigerator and it has sprung a leak twice creating a mess both times. I also have a 3/8" tubing teed to the 1/4", which has not had a leak thus far. Therefore, I will be replacing the 1/4" tubing with 3/8" using Watts reducing unions.
Date de publication: 2014-04-23
Rated 1 de 5 de par spend a little more and find a better quality water line Three days after installing this water line it sprung a leak 9" from the valve. Specs say this tubing has a working pressure of 165 psi and yet my 85 psi service caused failure after 3 days. Spend the time and a little extra money to find a better quality product and you will save the cost of clean up and water damage repair.
Date de publication: 2014-03-11
  • y_2024, m_4, d_12, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_10, tr_14
  • loc_fr_CA, sid_1001002217, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

1. Is this good for a fridge icemaker connection from under-sink valve? Just want to make sure as many reviews mention it leaks under pressure 2. Do compression sleeve, insert and nut need to be bought separately?

Posée par: Mojo
I have that tube installed for over a year without problem. It is good.
Répondue par: Stantheman16
Date de publication: 2021-04-18

Do you carry a narrower flexible tubing?

Posée par: Retired
At this time we do not stock a narrower flexible tubing. Please let us know if you have any other questions or concerns. Thank you, Watts Retail Group Customer Service
Répondue par: WattsWater
Date de publication: 2023-05-03

what compression fittings work with 1/4 od tubing

Posée par: Boimac33
1/4” OD compression Ander-Lign fittings will work on this tubing. Use the brass insert that comes with the fitting.
Répondue par: WattsWater
Date de publication: 2023-05-03

What is the temperature/pressure specifications of this material?

Posée par: James
This polyethylene tubing has a max pressure of 140psi @ 70ºF.
Répondue par: WattsWater
Date de publication: 2023-05-03

Could this be used to make a hula hoop?

Posée par: chloe
Hi Tampa, yes you can make a Hula Hoop from this material. You might want to go into your Home Depot and take a look at a product called PEX. It's in the plumbing dept. Good Luck.
Répondue par: KA8HD
Date de publication: 2016-10-10

Which of the tubing materials you sell (vinyl, pvc, polyethylene, HDPE etc.) is food grade tubing?

Posée par: Lou
The Watts tubing is not certified for food grade.
Répondue par: WattsWater
Date de publication: 2015-09-20

polyethylene 1/4 inch 5 feet tubing

Posée par: tvo258789
Thank you for asking. No, we do not stock this item in 5-10 foot lengths. The shortest length we have is the 25 foot. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376.
Répondue par: HomeDepot
Date de publication: 2023-05-02

Can this tubing be used in a RO/DI system for an aquarium?

Posée par: Kenny
Yes, this tubing can be used for RO/DI systems for aquariums.
Répondue par: WattsWater
Date de publication: 2015-09-20
  • y_2024, m_4, d_12, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_fr_CA, sid_1001002217, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 77ms
  • QUESTIONS, PRODUCT