L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # LVBRRW-1C Internet # 1000161732

Support de montage bas voltage un groupe pour travaux de rénovation. (Sans murs allongés)

  1. Utiliser pour des travaux de réfection
  1. En polycarbonate
  1. Fini Orange
  1. Carte de 1 unité

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1.75
Hauteur de l’emballage (en pouces)
6.15
Largeur assemblée (en pouces)
2.25
Largeur de l’emballage (en pouces)
3.99
Poids assemblé (en livres)
1.6
Poids de l’emballage (en livres)
0.1
Profondeur assemblé (en pouces)
4
Profondeur de l’emballage (en pouces)
1.7

Détails

Famille de couleurs
Orange
Intérieur/extérieur
Pour l'intérieur ou l'extérieur
Matériau
Polycarbonate
Pays d'origine
US-United States
Quantité par paquet
1
Type d'accessoires
Supports

Garanties et certifications

Garantie limitée de un an
Support de montage bas voltage 1 groupe pour travaux de rénovationCarlon Support de montage bas voltage 1 groupe pour travaux de rénovationSupport de montage bas voltage un groupe pour travaux de rénovation. (Sans murs allongés)
Carlon
1000161732
Support de montage bas voltage 1 groupe pour travaux de rénovation est évalué 3.1 de 5 de 11.
  • y_2024, m_3, d_4, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_8
  • loc_fr_CA, sid_1000161732, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 70ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Terrible Screws The screws required a lot of torque to sink into the plastic flapper which was difficult to do with Philips screws and a plastic frame. Ended up using pliers to pre-thread the plastic as much as I could before the actual install. Once the item was finally fastened to the wall, it was very sturdy and will work well. Terrible to install though.
Date de publication: 2018-01-30
Rated 1 de 5 de par Horrible design and quality Needed two of these and was forewarned by the other reviewers that the blue retaining flaps will brake when you try to tighten them inside the wall without pre-threading them and still one of the blue flaps broke off. As others have pointed out, it should not require a philips but a robertson screwdriver, there should have been a guide at the end of the box so that the screw, which should have been a machine screw, can pass through it to keep it aligned with the front, the blue retaining flaps should be the same thickness throughout and not have an indent in the bottom, which makes it bend and possibly break when you tighten it in the wall and the flaps should have been pre-threaded. The template to cut the hole in the wall is printed on the inside of the packaging and is partly covered by the plastic cover, making it impossible to cut it out in one piece. Overall a very bad product. If you are dealing with a regular, non-insulated wall use the Iberville metal wall mount bracket instead. Better and cheaper.
Date de publication: 2019-10-02
Rated 3 de 5 de par Good Bracket for a Concealed Area A good overall bracket to use after a wall has been finished, especially in a place where the wall plate won't be visible from the side. The packaging has a template you can use to trace the outline for the hole you need to make in the wall, which is very helpful. The only problem is that the two clamps that fix the brackets to the drywall clamp in such a way that the bracket is either loose, or slightly twisted, both of which result in the wall plate not sitting 100% tight to the wall. The gaps are minor and not a problem if the outlet will not be in a highly visible area.
Date de publication: 2021-02-18
Rated 3 de 5 de par Adequate, even if Dollar Store quality Many other reviews here correctly complain that the screws connecting the blue tabs are self-tapping and very tight. I avoided a problem here by soaping the screws, tightening then re-loosening them before installation. The template printing comes off when removing the blister packaging, so you'll need to do reassembly. With those poor quality issues managed, the bracket does do the job in the end.
Date de publication: 2020-04-21
Rated 5 de 5 de par No Issues Having read the other reviews, I made sure to try to tighten the screws a bit before installation, and ran into no issues installing it nice and tight. Preferred this box to the other Carlon 1-gang bracket, because this one has deeper walls to help protect the ethernet keystones installed in it.
Date de publication: 2018-07-26
Rated 2 de 5 de par Easy to break Decent retrofit box except for the screws to the box mount flaps. Philips screw head is a terrible choice and screws did not thread well. Before installing into the wall, I had to grab the box mount flap with linesmen pliers and hand turn in screws to set the flap to the approximate drywall depth. When I tried to screw in while in the wall the screws did not thread and the phillips bit was stripping out the screw head.
Date de publication: 2016-07-10
Rated 4 de 5 de par Helps make a nice tidy job This was a nice, low cost means to reinforce drywall for mounting non-electrical cables (in my case this supported a receptacle for Ethernet and coax). The screws that tighten the bracket are a bit tight but soaping them fixed that.
Date de publication: 2020-08-05
Rated 5 de 5 de par great low voltage product very handy to use ,no worries about metal interference
Date de publication: 2021-11-14
  • y_2024, m_3, d_4, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_8
  • loc_fr_CA, sid_1000161732, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 48ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 58ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;