L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.
Choisissez vos options

Aperçu

Modèle # 182-29 Internet # 1001206811

Le système de plafond suspendu de montage en surface CeilingMAX recouvre un vieux plafond de tuiles, les poutrelles de plancher, plâtre ou placoplâtre. CeilingMax fonctionne avec toutes tuiles standards de 2 x 2 ou de 2 x 4. Fait de vinyle de haute densité et qualité, CeilingMax élimine la rouille ou les égratignures sans aucune démolition ni dégât. CeilingMax donne une solution acoustique immédiate et avec son montage en surface, sauve jusquà 6 de hauteur de votre plafond. CeilingMax est disponible dans les finis assortis aux tuiles décoratives Fasade

  1. Un ensemble de 100pds carrés inclus 7mcx Support Dessus de 8 pi, 7mcx Profilé Dessous de 8 pi, 25mcx Tés 2 pi et 6mcx Profilé Mural 8 pi
  1. Maximisez la hauteur de votre plafond suspendu end ajoutant jusquà 6'' de hauteur dand une pièce
  1. Se pose sur des vieilles tuiles existantes, sur les poutrelles de plancher ou le placoplâtre
  1. Fait en PVC, Ceilingmax est Classe A pour sa résistance au feu
  1. Aucune rouille ou corrosion

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1
Hauteur de l’emballage (en pouces)
3.5
Largeur assemblée (en pouces)
0.9375
Largeur de l’emballage (en pouces)
5.5
Poids assemblé (en livres)
17
Poids de l’emballage (en livres)
18.04
Profondeur assemblé (en pouces)
97
Profondeur de l’emballage (en pouces)
97

Détails

Couleur possible
Nickel brosse
Pays d'origine
US-United States
Type d'accessoires pour plafond
Grilles et garnitures de carreaux pour plafonds

Garanties et certifications

Garantie limitée de 25 ans de la date dachat de CeilingMax
Ensemble Plafond Suspendu Montage En Surface, 100 pds carrés, Brushed NickelCeilingmax Ensemble Plafond Suspendu Montage En Surface, 100 pds carrés, Brushed NickelLe système de plafond suspendu de montage en surface CeilingMAX recouvre un vieux plafond de tuiles, les poutrelles de plancher, plâtre ou placoplâtre. CeilingMax fonctionne avec toutes tuiles standards de 2 x 2 ou de 2 x 4. Fait de vinyle de haute densité et qualité, CeilingMax élimine la rouille ou les égratignures sans aucune démolition ni dégât. CeilingMax donne une solution acoustique immédiate et avec son montage en surface, sauve jusquà 6 de hauteur de votre plafond. CeilingMax est disponible dans les finis assortis aux tuiles décoratives Fasade
Ceilingmax
1001206811
CAD2222024-02-25
Home Depot Canada
Ensemble Plafond Suspendu Montage En Surface, 100 pds carrés, Brushed Nickel est évalué 3.8 de 5 de 55.
  • y_2024, m_2, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_23, tr_32
  • loc_fr_CA, sid_1001206811, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 118ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Product rates 5 but home depot's kit deal rates 1 I love this product and have now installed two full basements with it. Its pretty easy to use and you dont lose precious headroom. My only concern is with home depot's policy of only selling it in kits. I needed 7 1/2 kits. I called the store and was told I cant return the unused portion of a kit. There were not enough cross tees in the kits for my install so i had to order more of those. I found ways to use up some of the leftovers in closets but Im still left with 9 full length pieces that will go in the garbage. In my view this is very poor corporate environmental responsibility for home depot.
Date de publication: 2017-09-10
Rated 4 de 5 de par Excellent, but... The product itself is excellent if a little flimsy. That said, it is more than sturdy enough to hold up ceiling tiles. I used fibreglass tiles which are very flexible. I imagine more solid tile would be a chore to install. Now for the "but"... The product is relatively expensive which is compounded by the fact that you have to buy it by the 100 sq ft. If your area is 301 sq ft you have to buy 4 boxes. On top of that, the shape of the room dictates which item you need the most of. A 10x10 room requires totally different parts than a 5x20 room (Odd shape I know but just making a point). I would be far more inclined to recommend this product and/or buy it again if it could be purchased in a more conventional way (like regular suspended ceiling parts). I ended up with a lot of waste which is totally useless.
Date de publication: 2015-04-08
Rated 4 de 5 de par Cross Tees and product integrity could be improved Watched the online video. Looks really easy. Reality is that you need to be careful as the product is flimsy. Don't drive your mounting screws hard. Lightly snug them or you will deflect the material. When your cross piece encounters a joist when 16" centers interact with a 24" field you must trim off the crest of the cross pieces with tin snips for clearance. This slows you down. I was afraid that the acoustical tiles I bought would be too heavy for this system but they seem to be staying up. Not much is holding them up. I don't like the marketing 64 sq and 100 sq feet only. So much material is wasted. Cost is also excessive for plastic. I needed to center light fixtures on tiles which slowed down my planning phase. I don't believe that it will be easy to take the system apart as the snap pieces lock in at 90 degrees. I do not see how they can be removed without damage to the system.
Date de publication: 2017-01-06
Rated 2 de 5 de par Leftovers in the box The product worked well; however, if you purchase the amount of the kit suggested as required for your ceiling, a large amount of the kit ends up wasted, resulting in apparently unnecessary expense. I ended up with several boxes of unusable kit on a 700 sq. ft area. That's not acceptable.
Date de publication: 2018-06-25
Rated 4 de 5 de par Ceiling Max I ordered the ceiling max system cause of the simplicity of the system and that it mounts right flush with the floor joists.It installed very easy. I used 1X3 boards to run across the floor joists first and found this helped to give a better base for the tracks. I followed the instructions on laying out the room and it went quick and easy. My only complaint was there seem to not be enough “ Cross Tees and lots of material left over. Mostly boarder pieces.
Date de publication: 2018-11-07
Rated 5 de 5 de par great ceiling tile mounting system The system works just as advertised and went together according to the instructions. Only small point is the piece that mounts to the beam does not have any pilot holes and when trying to screw them in over your head it was a bit tricky. The planning guide was very good in helping shape the pattern and centering the grid to avoid having small tiles on one side of the room and larger on the other.
Date de publication: 2020-07-27
Rated 4 de 5 de par Ceilingmax kit I selected this product because we have limited headroom in our basement. Installation was completed by a contractor accustomed to installing suspended ceilings, and he didn't have any problems. The runners appear to latch together solidly, and the appearance of the finished product is excellent. Because I chose 2' x 2' tiles, all cross-tees were used and I have a lot of runners and edge-strips left over. Home Depot could address this by offering additional cross-tees for sale.
Date de publication: 2017-12-15
Rated 1 de 5 de par Bad design I bought these last year and installed throughout my basement, was easy and fast to install. The problem is that after few weeks the Ts start to fall down and unlocking the system. You pop them back and they fall again in few weeks. Sent email to manufacturer but never got a response. I thought maybe they are not leveled well so I took the panels down and adjusted the whole basement again but the problem was not solve. Bottom line the joists will always float causing the runners to move and pop the Ts. Bad design save your money and time.
Date de publication: 2023-01-20
  • y_2024, m_2, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_23, tr_32
  • loc_fr_CA, sid_1001206811, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • REVIEWS, PRODUCT

Hi, I have bought 2' x 2' LED Panels. Would these panel work with your system?

Posée par: Ying
Not without some playing around. It’s really made for a 2x4 tile and if you install it without suspension, you have to make sure it fits between joist. But you may be able to work around it.
Répondue par: Alex
Date de publication: 2020-05-27

Can this system be installed where the ceiling contains air register vents?

Posée par: Simon
I installed it a ceiling with heating ducts. The ducts were fastened to the supporting joists, and I cut the rectangular holes for the outlets in the ceiling panels as I installed them. You may have to move a duct outlet so as to avoid running a ceiling support channel through the outlet.
Répondue par: Rick
Date de publication: 2021-02-04

I'm interested in the zero clearnece suspended ceiling tile kit my one question is how easy is it to unsnap it if you need to remove a tile to get at electrical or plumbing issues?

Posée par: Bryan
Thank you for your interest in our CeilingMAX Surface Mount Ceiling Grid Kit! Our runners can easily be unsnapped once installed. This is the best way to remove a tile if needed to access above the grid system. Please let us know if you have any additional questions at 800.434.3750. Thank you!
Répondue par: YourFasadeTeam
Date de publication: 2022-12-01

I notice multiple questions about tile removal but no official response, maybe I just didn't see it, but could you please respond to just how to remove tiles for work on pipes etc??

Posée par: Tony
I haven't had to do it yet, but it is technically possible although a bit awkward. It is still like a drop ceiling in that it uses the same kind of tiles that can be taken out, but the removal would be much more difficult as there isn't the same space above the tiles to manoeuvre them out of the way. You can't just take out the tile you want. You would have to take out a large section probably as the system kind of locks together piece by piece. So it's not as simple as a traditional drop ceiling, but still possible so "better" than a drywall ceiling? Hope that helps. There are YouTube videos about the installation. You may get more of an understanding from that.
Répondue par: Dave
Date de publication: 2024-01-22

Is there a video showing how to remove a tile once the ceiling is finished?

Posée par: wbender
Not that i am aware of. But it’s really easy. You just pull on the clipped cross bars, they unclip and you remove the tile. 
Répondue par: Alex
Date de publication: 2021-02-10

The information I see says it comes in 100 sg ft  can you be more specific as what exactly is in the “kit” 

Posée par: Hailey dog
Kit includes seven (7) 8 ft. long top hangers, seven (7) 8 ft. long runners, twenty-five (25) 2 ft. long cross tees and six (6) 8 ft. long wall brackets.
Répondue par: Kristie
Date de publication: 2020-12-15

If I’m installing flush mount lights how do I do it with this system. Just lower the light somehow??

Posée par: Jasonv93
I installed flush mount LED lights which a small LED driver box which the lamp plugged in to. I mounted the LED driver box in the joists and connected the wiring before installing the ceiling. I spaced lights so that lights would be between joists. As I got to the ceiling tile that required the light, I cut the proper hole size for the light. I installed the ceiling tile in position, reached through the hole to grasp the short connecting wire between the LED Driver box and the lamp, and plugged it in. Then I inserted the LED lamp in the hole. The lights I used were puck-like LEDs. They are about 1 inch thick, and have two springs clips which hold them up in the ceiling tile when installed.
Répondue par: Rick
Date de publication: 2020-12-15

What is the maximum thickness of tile that can fit in the grid while installed? For example, will a 0.2" thick tile fit with a 0.8" thick piece of Soniguard insulation?

Posée par: Brandon
Thank you for your interest in our CeilingMAX surface mount Grid Kit 100 sq. ft.! Our grid system can accommodate a tile up to 3/4" in thickness. Make sure the tile can be installed in a 15/16" grid system. If you have any additional questions please feel free to reach out to us at 800.434.3750. Thank you!
Répondue par: YourFasadeTeam
Date de publication: 2021-04-11
  • y_2024, m_2, d_23, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_fr_CA, sid_1001206811, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 68ms
  • QUESTIONS, PRODUCT