L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # KC 003 Internet # 1001213789

Les crochets pour balançoire robustes de Creative Cedar Designs vous permettent de suspendre des balançoires en toute confiance. Vous savez que les accessoires de fixation de votre balançoire sont solidement fixés pour les années à venir. En métal moulé solide, les crochets pour balançoire sont conçus pour offrir tranquillité d'esprit pour des années de jeu et d'exposition aux intempéries. Les crochets pour balançoire robustes sont vendus en paire (2) avec tous les accessoires de fixation nécessaires ainsi que les directives d'installation illustrées. Se fixent à n'importe quelle poutre en bois pour balançoire pour une compatibilité avec une variété d'équipements de jeu d'arrière-cour

  1. L'ensemble de fixation pour balançoire à assembler soi-même comprend 2 crochets pour balançoire robustes avec attaches rapides, les accessoires de fixation et les directives d'installation illustrées comportant une liste
  1. Les crochets robustes en métal moulé solide pour balançoire sont conçus pour un usage résidentiel prolongé sur des portiques extérieurs résidentiels
  1. Le système à deux boulons, l'un sur et l'autre sous la poutre de bois pour balançoire, a été conçu pour rester solidement fixé pendant des années
  1. pour balançoire, avec mousquetons, est dotée d'attaches rapides pour garantir la fixation sécuritaire de votre balançoire d'arrière-cour sur n'importe quelle structure de jeu et les crochets sont conçus pour supporter jusqu'à 113 kg (250 lb)
  1. Conçus pour un usage résidentiel uniquement avec une variété de balançoires et d'accessoires de portique destinés aux enfants de 3 à 10 ans

Spécifications

Dimensions

Hauteur assemblé (en pouces)
3.56
Hauteur de l’emballage (en pouces)
3.25
Largeur assemblée (en pouces)
4.25
Largeur de l’emballage (en pouces)
4.5
Poids assemblé (en livres)
4.1
Poids de l’emballage (en livres)
4.3
Profondeur assemblé (en pouces)
2
Profondeur de l’emballage (en pouces)
8.5

Détails

Longueur (en pouces)
4.25
Pays d'origine
CN-China

Garanties et certifications

Vous pouvez nous joindre au 1-888-363-4967. Du lundi au vendredi: de 9h à 16h. Les pièces défectueuses doivent être signalées dans les 30 jours suivant l'achat pour bénéficier de la livraison gratuite et des remplacements.
Crochets pour balançoire ultimes (ensemble de 2)Creative Cedar Designs Crochets pour balançoire ultimes (ensemble de 2)Les crochets pour balançoire robustes de Creative Cedar Designs vous permettent de suspendre des balançoires en toute confiance. Vous savez que les accessoires de fixation de votre balançoire sont solidement fixés pour les années à venir. En métal moulé solide, les crochets pour balançoire sont conçus pour offrir tranquillité d'esprit pour des années de jeu et d'exposition aux intempéries. Les crochets pour balançoire robustes sont vendus en paire (2) avec tous les accessoires de fixation nécessaires ainsi que les directives d'installation illustrées. Se fixent à n'importe quelle poutre en bois pour balançoire pour une compatibilité avec une variété d'équipements de jeu d'arrière-cour
Creative Cedar Designs
1001213789
CAD40.982024-02-22
Home Depot Canada
Crochets pour balançoire ultimes (ensemble de 2) est évalué 4.6 de 5 de 102.
  • y_2024, m_2, d_22, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_20, tr_82
  • loc_fr_CA, sid_1001213789, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 22ms
  • REVIEWS, PRODUCT
Rated 2 de 5 de par I'm so annoyed. I checked the install guide PDF on Home Depot website and it says to use a 5/16 d... I'm so annoyed. I checked the install guide PDF on Home Depot website and it says to use a 5/16 drill bit. So I spent $10 on a long 5/16 drill bit and ordered it along with these hangers. The manual I received with the hangers says I actually need a 3/8" drill bit. Also the hangers I received doesn't have the 8 little screw system for the top as pictured. Don't care about that but obviously I got something slightly different than what is pictured. Really frustrating. I'm sure the actual product will be solid and well built if I had the right drill bit to hang it.
Date de publication: 2020-04-02
Rated 3 de 5 de par The pivot eyelet attachments are substantial and don't feel like they are going anywhere. The cli... The pivot eyelet attachments are substantial and don't feel like they are going anywhere. The clips to connect the pivots to the chain, however, were awful. They deflected with very little load. I replaced them with something stronger.
Date de publication: 2020-10-07
Rated 4 de 5 de par I used these "ULTIMATE SWING HANGERS (2-PIECE)" on my grandsons play set. Very easy to install wi... [This review was collected as part of a promotion.] I used these "ULTIMATE SWING HANGERS (2-PIECE)" on my grandsons play set. Very easy to install with just the basic concept of "handyman-ness" (The ability to tell a drill from a hammer). All you need is a drill and a wrench. The mountings seem durable, the bolts and brackets are good quality. The weak point may be the carabiners. I considered getting something a little beefier, we'll see in awhile. I push the weight limits listed and it holds me. All in all a good if not great product.
Date de publication: 2017-10-15
Rated 2 de 5 de par Solid brackets held back by thin hardware The brackets themselves seem pretty solid. The included carriage bolts, nuts, washers, and carabiner seem way too small and likely to be the weak point over time. The holes in the bracket are 1/2" but the included carriage bolts are only 5/16". The washers are only 3/4" outer diameter, so only a small part of their material overlaps the bracket. And the nuts are actually less than half an inch in diameter, smaller than the holes they are over! Even if I wanted to spend extra money on larger bolts, 6 1/2" bolts are hard to find.
Date de publication: 2020-10-28
Rated 5 de 5 de par The swing hangers took only minutes to install. More detail... The swing hangers took only minutes to install. More detail on the type of lubricant to use, Also, when the bolts are installed through the drilled holes, they may be encased with wood debris which should be removed with a wire brush before the nuts are installed. Use safety goggles when doing this if at eye level'
Date de publication: 2020-09-09
Rated 4 de 5 de par Heavy duty cast swing brackets, but they don't have the... Heavy duty cast swing brackets, but they don't have the plastic washers or bushings that most similar brackets do. It is very likely that these will start to make a lot of noise as they get older - the swinging piece simply rotates around a bolt and wobbles a little bit.
Date de publication: 2020-07-14
Rated 4 de 5 de par Works well. They were squeeky and I sprayed it with... Works well. They were squeeky and I sprayed it with WD-40 to stop it.
Date de publication: 2020-09-08
Rated 5 de 5 de par Heavy Duty! I’m always a little skeptical when something is described as “heavy duty” online. I was also slightly put off by the higher price tag, but these are the real deal. Extremely solid and over-engineered. I was surprised when I took it out and felt how heavy it was. Half of it could rust away and it would still be stronger than others I looked at. It appears to be galvanized so I don’t expect that to happen. The pictures don’t do it justice.
Date de publication: 2022-04-20
  • y_2024, m_2, d_22, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_20, tr_82
  • loc_fr_CA, sid_1001213789, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

There doesn't appear to be a teflon washer in the swinging mechanism. Do these squeak a lot?

There doesn't appear to be a teflon washer in the swinging mechanism. Do these squeak a lot?
Posée par: Lily
No, I believe there is a bronze bushing inside that the swing part rides on. I've had these for a couple years at my house and only spray a little WD40 once a year on the brackets.
Répondue par: GHi
Date de publication: 2023-05-06

What size holes do these bolts require for installation?

What size holes do these bolts require for installation?
Posée par: DDB
The carriage bolts require a 5/16" hole drilled through the beam.
Répondue par: Jason
Date de publication: 2023-05-07

Can these bolts go through a beam that is 11 inches thick?

Posée par: Cooldad71
They cannot. For beams thicker than six inches, we recommend purchasing bolts at your local hardware store. All other pieces included are one size fits all.
Répondue par: Creative Cedar Designs
Date de publication: 2023-05-07

Is this set for 2 swings?

Posée par: Cynthia
No, this set is for one individual swing.
Répondue par: ABBuildsThings
Date de publication: 2020-08-09

Is all the hardware pictured in the kit? Ultmate Heavt Duty Swing Hangers (2-Piece) Interney # 300859414 Model #KC003

Posée par: Wesley
Yes
Répondue par: Bk351
Date de publication: 2023-05-07

How long are the mounting bolts? Are they for 4x6 beam?

Posée par: lprising
The mounting bolts are 6.5 inches long
Répondue par: Creative Cedar Designs
Date de publication: 2021-04-27

The chain for the swing , the pink paint on the chain only goes up halfway and the the other half of the chain is just the metal color . this does not look right. Shouldn't the pink color on the chain go the length of the chain?

Posée par: stevied
Hi! The pink vinyl coating only goes partially up the chain. The purpose of the coating is to protect children's hands from extreme temperatures on the chains, as well as pinches, so it only coats the chain in the area that hands would be touching the chain. Thanks! Creative Cedar Designs
Répondue par: Creative Cedar Designs
Date de publication: 2023-05-07

Can I use the swing hangers or the tire sswing swivel for the ceiling of my apartment to hang a chair hammock?

Posée par: Keld
First, ask manager of apartment if you can do it. Second, this device is made to support the weight from above with a  flat plate and you aren’t able to do that. Third, what you are trying to attach it to above needs to be able to carry the load. Do you know if it can or are you guessing? Lastly, the bracket can do the job but the real question is you might not want to. 
Répondue par: The wrench
Date de publication: 2023-05-07
  • y_2024, m_2, d_22, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_fr_CA, sid_1001213789, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 49ms
  • QUESTIONS, PRODUCT