L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.
Choisissez vos options

Aperçu

Modèle # CPG38117 Internet # 1001015048

Le coulis aux performances ultimes Prism établit une nouvelle norme dans la technologie des coulis à base de ciment. La formulation à base de ciment d'aluminate de calcium de Prism offre une couleur uniforme sans ombrage, indépendamment du type de carreaux, la température ou l'humidité. Et il est sans efflorescence. La formule à prise rapide permet d'obtenir des joints très résistants et denses pour une résistance maximale aux taches dans les joints de coulis jusqu'à 13 mm (½ po). Un mélange unique de verre recyclé léger et de sable fin permet une consistance lisse facile à étaler et à nettoyer. Prism peut être utilisé pour les installations intérieures ou extérieures, y compris les planchers, comptoirs, murs, plafonds, douches, fontaines et piscines.

  1. Couleur cohérente sans assombrissement ni efflorescence
  1. Résiste au rétrécissement, à la fissure, au poudrage et à l'usure
  1. Durcit rapidement, développant une haute résistance initiale
  1. Peut être utilisé à la fois sur le plancher et sur les murs
  1. Utiliser pour les comptoirs, les baignoires, les douches et les zones très fréquentées
  1. Utilisation également recommandée en conditions immergées (piscines, spas, jeux d'eau et fontaines)

Spécifications

Dimensions

Hauteur assemblé (en pouces)
7
Hauteur de l’emballage (en pouces)
7
Largeur assemblée (en pouces)
10.5
Largeur de l’emballage (en pouces)
10.5
Poids assemblé (en livres)
17
Poids de l’emballage (en livres)
17
Profondeur assemblé (en pouces)
7
Profondeur de l’emballage (en pouces)
7

Détails

Caractéristiques du matériau du revêtement de sol
Anti-tache, Ne requiert aucun scellant, Poncé
Famille de couleurs
Multicolore
Pays d'origine
US-United States
Pose de carreaux et couleur du coulis
Blanc brillant
Surface maximale couverte (en pieds carrés)
1096
Type
Coulis
Utilisation
Mur extérieur, Résidentielle (intérieur), Qualité commerciale, Piscine, Contour de baignoire, Commercial/résidentiel et bureau, Plancher, Douche, Pour l'extérieur, Revêtement de comptoir, Mur intérieur

Garanties et certifications

1 année de garantie
Coulis antitache pour carrelage et pierre, Prism #381, blanc lumineux, 7,7 kg (17 lb)Custom Building Products Coulis antitache pour carrelage et pierre, Prism #381, blanc lumineux, 7,7 kg (17 lb)Le coulis aux performances ultimes Prism établit une nouvelle norme dans la technologie des coulis à base de ciment. La formulation à base de ciment d'aluminate de calcium de Prism offre une couleur uniforme sans ombrage, indépendamment du type de carreaux, la température ou l'humidité. Et il est sans efflorescence. La formule à prise rapide permet d'obtenir des joints très résistants et denses pour une résistance maximale aux taches dans les joints de coulis jusqu'à 13 mm (½ po). Un mélange unique de verre recyclé léger et de sable fin permet une consistance lisse facile à étaler et à nettoyer. Prism peut être utilisé pour les installations intérieures ou extérieures, y compris les planchers, comptoirs, murs, plafonds, douches, fontaines et piscines.
Custom Building Products
1001015048
CAD61.882024-02-29
Home Depot Canada
Coulis antitache pour carrelage et pierre, Prism #381, blanc lumineux, 7,7 kg (17 lb) est évalué 4.4 de 5 de 103.
  • y_2024, m_2, d_29, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_23, tr_80
  • loc_fr_CA, sid_1001015048, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 130ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par Easy to use. My grout lines were 1/16 and it flowed/filled quite easily. My only problem was that... Easy to use. My grout lines were 1/16 and it flowed/filled quite easily. My only problem was that the coverage was way off. Their chart says a box should cover 96' ft for 1" square tiles 1/4" thick with a caveat for jobsite conditions and installation practices, but I'm not sure how that could really change things that much. I was working indoors with 66 degree temps, pretty average, but i used practically the entire box for just 42 sq ft! I mixed each pouch separately which gave me less stress to try and get it all down in the recommended 30 minutes. That also kept my work area in easy reach and my knees out of the grout, or from having to use a board. I highly recommend this product!
Date de publication: 2019-02-01
Rated 5 de 5 de par Needed to remodel the small bath in our house (built in 1960) this included the shower and floor.... Needed to remodel the small bath in our house (built in 1960) this included the shower and floor. I have used Custom Building Products grout for years but not the Prism line until now. The prism grout worked perfect, easy mixing (no lumps) and was easy to float, it dose set up faster than the regular line of grout, this can be good or bad depending how fast you work. Cleanup is a bit sticky compared to the regular line of grout but is worth it for a better product, time will tell if it lives up to its "stain resistant - no sealer required" statement. The only downside is that they do not recommend using it with glass tile, had to use the regular smooth grout for those tiles, beyond that, great product.
Date de publication: 2020-08-25
Rated 4 de 5 de par Used this product in the "bone" color. This is the first grout job on the first tile job I have e... Used this product in the "bone" color. This is the first grout job on the first tile job I have ever done. Used it on a tub surround with 12 x 12 porcelain tile. I found the grout easy to apply, pack into the joints, shape, and the haze was easy to remove after a few hours using only cheesecloth to buff the tile. The key is to mix in small batches or if you are working in a large area, or have several people all with their own grout and floats and working together. I put 8 oz of water into leftover quart yogurt tubs, gradually added 2 pounds, 2 oz of grout powder, mixing well with a stir stick, after each addition of powder. Before the last addition of powder, I added about approx. 2 tablespoons more of water. Add the last powder and stir. Rest for 5 minutes, mix and use. The product will flow well and be usable for about 30 minutes. After that it became too thick and grainy and was very hard to push into the joints. Give up then, clean out what is left in the container, and mix more fresh. Worked well for my tub surround and would probably be manageable for shower, but would take some planning for a large floor if you were working by yourself. The setup time is unforgiving. If you can work with the fast setup, the results are great and the color is consistent throughout.
Date de publication: 2019-07-14
Rated 5 de 5 de par Much lighter than most other grouts. Bright white. Satin smooth when mixed. Perfect for floor til... [This review was collected as part of a promotion.] Much lighter than most other grouts. Bright white. Satin smooth when mixed. Perfect for floor tile when filling a thin 1/16" grout line. I use a blue handled tile grout saw to remove my old grout. It pays to take your time, unless you like replacing damaged ceramic tiles. Once the old is out, dampen (wet sponge wrong out) the area for good adhesion per the instructions. Mixing is easy with the correct ratio of water to powder. I use a drill and mixing spoon in a small paint bucket. My favorite part is filling the lines. Wipe with a sponge and wait for it to dry. I like to clean as much excess grout and powder from the tile as soon as I can. A few big yellow sponges in a fresh bucket of water work great here. (NEVER pour the dirt water down your drain.)
Date de publication: 2017-12-13
Rated 5 de 5 de par Do NOT use warm water! Was tiling a shower in an assisted living home. The only water available in the bathroom was warm anout 100 degrees. I was trying to minimize trips thru the facility, so i mixed first mix following directions except the water. This stuff got so hot after 10 minutes i thought it would melt the bucket and turned hard as a rock. I dumped that bucket and got cool 65 degree water and it worked great for 20 minutes till rock hard again. I mixed only ising hand trowel. Finished out using quarter batches, not really productive. Product also seems to haze a lot more than other grouts. Tihis shower gets used 6 times a day seven days a week, time will tell if its a godd as adverised.
Date de publication: 2020-06-22
Rated 1 de 5 de par Whole bucket set in less than 15 minutes. Whole bucket set in less than 15 minutes.
Date de publication: 2020-01-05
Rated 5 de 5 de par This group made the last step of my bathroom renovation much easier. It was a quick application,... [This review was collected as part of a promotion.] This group made the last step of my bathroom renovation much easier. It was a quick application, and many different colors to choose from. I selected the bright white due to the color of stones in the existing vanity features in my bathroom. spreading was very simple, cleanup was even easier. It has now been curing for about a week, and while I cannot speak to its lifetime, i am very pleased with the results.
Date de publication: 2017-07-29
Rated 1 de 5 de par Although I ordered Prism in "bright white", it was dingy... Although I ordered Prism in "bright white", it was dingy gray at best and in no way was a shade of white at all. I had high hopes but completely let down. It did not match with my tile and couldn't be used at all.
Date de publication: 2017-01-24
  • y_2024, m_2, d_29, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_23, tr_80
  • loc_fr_CA, sid_1001015048, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 24ms
  • REVIEWS, PRODUCT

Can you use this grout with Datile Restore Glazed Cermaic Tile?

Posée par: Chris
Absolutely, Prism is an excellent product.
Répondue par: Wayne80
Date de publication: 2023-05-07

can prism be used on gloss tile and glass tile?

can prism be used on gloss tile and glass tile?
Posée par: hdtile6528
Yes it can. I used a glossy glass tile on my backsplash in the kitchen. My tile setter was very happy with the product and it looks great on the wall. I also used it on the floor for porcelain tile. Great product and easy to clean.
Répondue par: dlucas5469
Date de publication: 2023-05-06

Does this product need a sealer additive or needs to be sealed after use

Does this product need a sealer additive or needs to be sealed after use
Posée par: rccustom
It does not NEED sealer or additive, but according to the manufacturer, for improved stain resistance, you MAY use it.
Répondue par: Optiguytom
Date de publication: 2023-05-06

Can 511 Impregnator Sealer be used over this grout in a shower surround?

Can 511 Impregnator Sealer be used over this grout in a shower surround?
Posée par: BPJ
Yes. I used it on my tub surround.
Répondue par: AlwaysLearning
Date de publication: 2023-05-06

Is Prism grout mold and bacteria proof?

Is Prism grout mold and bacteria proof?
Posée par: sharlene
Our products do not promote the growth of mold/mildew or bacteria; Keeping grout free from mold/mildew or bacteria will require routine cleaning. For further assistance please contact our technical services department at 1 800 282 8786 option 3.
Répondue par: CustomBuildingProducts
Date de publication: 2023-05-06

Can this be used on pool decks to fill in cracks?

Can this be used on pool decks to fill in cracks?
Posée par: Jeff
Prism Grout can be used as a grout on pool decks, but it is not a crack repair product. For further information please contact our technical services department at 1 800 282 8786 option 2.
Répondue par: CustomBuildingProducts
Date de publication: 2023-05-06

Does this grout have epoxy in it? We want to use it on an exterior rock wall that will be exposed to UV light. I read on the technical bulletin from Custom (TB18) that grout with epoxy resin will yellow when exposed to UV light.

Posée par: JCGA
No Epoxy in this grout.
Répondue par: BPsTile
Date de publication: 2023-05-07

Can the prism be put on a plywood floor and tile

Posée par: Justinquiring
this grout can be applied over any floor. Concrete, cement board, plywood, etc. Just make sure the plywood is completely stabilized to the subfloor and not prone to flexing.
Répondue par: Jim
Date de publication: 2023-05-05
  • y_2024, m_2, d_27, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_26
  • loc_fr_CA, sid_1001015048, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 87ms
  • QUESTIONS, PRODUCT