Découvrez nos produits Depot Drop hebdomadaires - En ligne seulement + livraison gratuite!  Magasinez maintenant
Choisissez vos options

Aperçu

Modèle # DCS16200-1 Internet # 1000664809

Il s'agit d'un clou de finition de 2 pouces de calibre 16, livré à 2500 clous par boîte. Il a une pointe biseautée. 50 attaches sont livrées par bâton pour minimiser le rechargement. Ce clou est conçu pour s'adapter aux cloueurs DEWALT, ainsi qu'à toute cloueuse de finition de calibre 16 avec une capacité de 2 pouces. Fabriquant une gamme complète d'outils électriques, d'équipements et d'accessoires, DEWALT propose un produit pour chaque situation. De la construction de maisons neuves à l'entretien des bâtiments. De la ferme au travail du bois haut de gamme. Tous, des professionnels chevronnés aux amateurs occasionnels, utilisent les outils DEWALT chaque fois qu'ils veulent que le travail soit bien fait.

  1. À utiliser avec la cloueuse #131915 (vendue séparément)
  1. Compatible avec la plupart des cloueuses à finition droite de type 16-Gauge
  1. Finition brillante
  1. Longueur de 2 pouces
  1. La boîte comprend 1 000 clous
  1. Type de pointe de fixation : ciseau à bois
  1. Outils IPG : D51256K, D51257K, DC616K, FN250B, FN250C

Spécifications

Dimensions

Hauteur assemblé (en pouces)
5
Hauteur de l’emballage (en pouces)
1.5
Largeur assemblée (en pouces)
3.44
Largeur de l’emballage (en pouces)
2.38
Poids assemblé (en livres)
7.68
Poids de l’emballage (en livres)
1.65
Profondeur assemblé (en pouces)
10.13
Profondeur de l’emballage (en pouces)
3.88

Détails

Assemblé
Certifié
Couleur et fini
Zingué
Diamètre de la tête (en po)
2.13
Dintérieur ou Dextérieur
Interieur
Fini/matériau du produit
Galvanisé
Longueur (en pouces)
2
Longueur du produit
2 po
Matériau
Acier
Pays d'origine
TW-Taiwan
Poids du produit
0.71 lb
Quantité par paquet
1000
Taille
6D
Type
Clou de finition
Type de tige
Lisse
Type de tête
Plat

Garanties et certifications

Numéro de téléphone du Service à la clientèle : 1 800 567-7188
16 GA Finish, 2" de long, paquet de 1000DEWALT 16 GA Finish, 2" de long, paquet de 1000Il s'agit d'un clou de finition de 2 pouces de calibre 16, livré à 2500 clous par boîte. Il a une pointe biseautée. 50 attaches sont livrées par bâton pour minimiser le rechargement. Ce clou est conçu pour s'adapter aux cloueurs DEWALT, ainsi qu'à toute cloueuse de finition de calibre 16 avec une capacité de 2 pouces. Fabriquant une gamme complète d'outils électriques, d'équipements et d'accessoires, DEWALT propose un produit pour chaque situation. De la construction de maisons neuves à l'entretien des bâtiments. De la ferme au travail du bois haut de gamme. Tous, des professionnels chevronnés aux amateurs occasionnels, utilisent les outils DEWALT chaque fois qu'ils veulent que le travail soit bien fait.
DEWALT
1000664809
CAD26.352024-05-20
Home Depot Canada
16 GA Finish, 2" de long, paquet de 1000 est évalué 4.6 de 5 de 479.
  • y_2024, m_5, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_154, tr_325
  • loc_fr_CA, sid_1000664809, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 92ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Porter Cable 16 gauge x 2" finish nails Rock! These are the ONLY nails that will work in my Porter Cable finish nailer. I ran 2 boxes through without a jam or misfire. I highly recommend these to any Porter Cable user!
Date de publication: 2015-08-19
Rated 5 de 5 de par After two years, I finally had to break down and... After two years, I finally had to break down and purchase these 16 gauge brads. They are exactly like the ones that came with the air nail gun. If I had to complain about anything, it would be that the box is just a bit larger than the old one and it will not fit in the nail gun case. Which makes carrying it around a problem unless I put them in the case without the box. That has disaster written all over it.
Date de publication: 2023-04-05
Rated 4 de 5 de par I initially didn't see much difference in these and the bargain brand nails that are about half the price. However, I was using these to hold down the corner edge of some hardie clapboards, and the cheap ones would curl, jam my gun, etc. These name brand nails held up better when installing. In the end, if you are working with more difficult material, these are well worth the price for limiting the aggravation. If, however, you are just working with soft wood, you may find these a bit pricey in comparison.
Date de publication: 2023-08-23
Rated 5 de 5 de par This is the second box I’ve purchased from this brand. Very satisfied with all prOjects around t... This is the second box I’ve purchased from this brand. Very satisfied with all prOjects around the house.
Date de publication: 2020-06-13
Rated 5 de 5 de par Loved these nails they saved me a ton of money in new trim work. Works awesome for DIY. Loved these nails they saved me a ton of money in new trim work. Works awesome for DIY.
Date de publication: 2020-07-30
Rated 5 de 5 de par Great nails never rust... Great nails never rust
Date de publication: 2021-02-25
Rated 4 de 5 de par I didn’t realize that the box had been cut. But... I didn’t realize that the box had been cut. But I noticed when I got to my truck that the tape had been cut, and two sticks of nails had been take out. Can’t blame Home Depot for that. I didn’t want to go back in and say anything, cause it is only like $1.50. I’m sure Home Depot would have given me a full box and sold that one on clearance or something, Home Depot is great. And the nails are as expected. They go in my gun, and hold trim where I put it.
Date de publication: 2022-03-15
Rated 5 de 5 de par Simple easy to understand instructions. The air hammers work perfectly and amazingly I can use sm... Simple easy to understand instructions. The air hammers work perfectly and amazingly I can use smaller brads than expected because the power is able to sink them with a small inset so I get full use of the entire brad. Tank is not too heavy, automatic shut off / power on, hoses are higher quality than I expected. Also with the adjustable air pressure for the hose I will be able to use with a paint gun as well.
Date de publication: 2019-11-12
  • y_2024, m_5, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_154, tr_325
  • loc_fr_CA, sid_1000664809, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • REVIEWS, PRODUCT

can it be used for rough house framing?

Posée par: jim
I believe 16 gauge nails are good foot trimming, base, casing, etc. not rough framing.
Répondue par: Dank
Date de publication: 2023-05-05

Will these split 1/4” plywood?

Adding 1/4” plywood to replicate shiplap and wondering if these will split it?
Posée par: John
Probably won't split 1/4" plywood but better to use Brad Maie r if possible
Répondue par: Fritz
Date de publication: 2023-05-06

Will these work for nailing wood pickets on my fence? Okay for treated lumber?

Posée par: Bdog
Hello BDog Thank you for your contact. We apologize for any trouble or inconvenience in finding information. The galvanization on the finish nails is not suitable for pressure treated lumber. If you decide to go with finish, you must use SS (stainless steel) nails. Best Regards Sherri C PORTER-CABLE
Répondue par: portercableProductExpert
Date de publication: 2023-05-07

will these work in a Craftsman 351-18314?

Posée par: Jim
It should. I believe your nail gun takes up to a 2.5" nail, 16 gauge. So yes would be the answer.
Répondue par: billjr
Date de publication: 2023-05-04

Why does this item page list conflicting #'s of nails per box? It says both 1000 and 2500.

Posée par: ThatGuy
Probably 2 different size packages of nails.
Répondue par: AJ
Date de publication: 2023-05-03

Will this work with hardie trim?

Posée par: Jg75001
The more interesting question is will it work at all. I bought one for some trim work. Lasted 10 nails and stopped working. Not jammed just broken. Returned fir refund. Oddly enough I have an 18 gage pin nailer same manufacturer works great.
Répondue par: DanH
Date de publication: 2023-05-07

I am needing 16 GA X 2; FINISHING NAILS , and the model number on the box I have lists the model ...

I am needing 16 GA X 2; FINISHING NAILS , and the model number on the box I have lists the model number has says N017111. I cant locate this number in the Porter Cable nails. Is this item, PFN1620, the exact same thing?? . Are they the same thing?? Thanks
Posée par: Kari
I believe the model number you’re looking for is the same nail but packaged differently. These should work for your nailer if that’s the size you’re looking for.
Répondue par: Gary
Date de publication: 2023-05-06

Are these good for exterior applications?

Posée par: Debbie
I don't think so. They are plain, uncoated steel, so they will not stand up to weather exposure -- they will rust.
Répondue par: TRod
Date de publication: 2023-05-06
  • y_2024, m_5, d_19, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_fr_CA, sid_1000664809, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT