Magasinez les aubaines du Vendredi fou que vous ne voudrez pas manquer!  Magasiner les articles de l’événement

DEWALT Agrafeuse pour parquet de calibre 18 20V MAX XR Lithium-Ion sans fil et sans balai avec batterie 4Ah, chargeur et sacoche

Modèle nº DCN682M1|Nº UGS 1001104142

Aperçu

Modèle # DCN682M1 Internet # 1001104142

L'agrafeuse à couronne étroite calibre18 de DEWALT enfonce des agrafes à couronne étroite de 6.35mm (1/4po), calibre 18, de 12.7mm (1/2po) à 38.1mm (11/2po), la rendant idéale pour l'installation de bois franc solide et d'ingénierie d'une épaisseur allant de 9.53mm (3/8po) à 15.88mm (5/8po). Un bras de contact optimisé pour le plancher ainsi qu'une base réglable sans outil permettent d'enfoncer les fixations avec précision à l'angle et à la profondeur adéquats. Grâce à un moteur sans balais alimenté par une batterie DEWALT 20V MAX* au lithium-ion, l'agrafeuse DCN682 est prêt à fonctionner sans les tracas de l'utilisation de gaz, d'un compresseur, ou d'un tuyau. La première agrafeuse pour plancher au monde alimentée par batterie La tension nominale est de 18volts. Comprend une agrafeuse pour plancher, une batterie 4.0AH, un chargeur, et un sac de rangement.

  1. La base ajustable sans outil s'adapte aux épaisseurs de plancher de 3/8 à 5/8 de pouce.
  1. La base ajustable sans outil s'adapte aux épaisseurs de plancher de 3/8 à 5/8 de pouce.
  1. 100% alimenté par batterie, élimine les tracas liés à l'utilisation du gaz, du compresseur et du boyau d'arrosage
  1. Le moteur sans balai maximise la durée de vie et la durabilité.
  1. Engagement de la languette à haute visibilité pour une installation rapide et des pointes de profil non marquantes pour éviter les égratignures sur le plancher
  1. L'éclairage multifonctionnel permet d'éclairer l'espace de travail et de diagnostiquer les outils.
  1. Déclencheur sélectionnable sans outil pour les modes d'actionnement séquentiel ou séquentiel rapide
  1. Levier de décrochage intégré sans outil pour un réarmement rapide de la lame d'entraînement en cas de décrochage.
  1. Magasin à chargement par le bas pour faciliter le chargement et le retrait des fixations coincées

Spécifications

Dimensions

Hauteur assemblé (en pouces)
6.365
Hauteur de l’emballage (en pouces)
6.36
Largeur assemblée (en pouces)
11.865
Largeur de l’emballage (en pouces)
11.86
Poids assemblé (en livres)
12.35
Poids de l’emballage (en livres)
12.35
Profondeur assemblé (en pouces)
18.72
Profondeur de l’emballage (en pouces)
18.72

Détails

Calibre (cal.)
18
Pays d'origine
CA-Canada
Source dalimentation
Sans fil
Taille maximale de lattache (en po)
1-1/2
Taille minimale de lattache (en po)
1/2

Garanties et certifications

Garantie limitée de 3ans
Agrafeuse pour parquet de calibre 18 20V MAX XR Lithium-Ion sans fil et sans balai avec batterie 4Ah, chargeur et sacocheDEWALT Agrafeuse pour parquet de calibre 18 20V MAX XR Lithium-Ion sans fil et sans balai avec batterie 4Ah, chargeur et sacocheL'agrafeuse à couronne étroite calibre18 de DEWALT enfonce des agrafes à couronne étroite de 6.35mm (1/4po), calibre 18, de 12.7mm (1/2po) à 38.1mm (11/2po), la rendant idéale pour l'installation de bois franc solide et d'ingénierie d'une épaisseur allant de 9.53mm (3/8po) à 15.88mm (5/8po). Un bras de contact optimisé pour le plancher ainsi qu'une base réglable sans outil permettent d'enfoncer les fixations avec précision à l'angle et à la profondeur adéquats. Grâce à un moteur sans balais alimenté par une batterie DEWALT 20V MAX* au lithium-ion, l'agrafeuse DCN682 est prêt à fonctionner sans les tracas de l'utilisation de gaz, d'un compresseur, ou d'un tuyau. La première agrafeuse pour plancher au monde alimentée par batterie La tension nominale est de 18volts. Comprend une agrafeuse pour plancher, une batterie 4.0AH, un chargeur, et un sac de rangement.
DEWALT
1001104142
Agrafeuse pour parquet de calibre 18 20V MAX XR Lithium-Ion sans fil et sans balai avec batterie 4Ah, chargeur et sacoche est évalué 4.4 de 5 de 47.
  • y_2022, m_11, d_27, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_46
  • loc_fr_CA, sid_1001104142, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 54ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Easy To Use, Eases Flooring Installations [This review was collected as part of a promotion.] The Dewalt 20-Volt flooring stapler kit comes with everything you need. the kit also includes a bag for easy carrying to and from the job site. the stapler has a setting to shoot single or multiple fasteners. The fasteners are easy to load. the head is easy to remove for jammed fasteners. The head easily adjusts from 3/8" to 5/8" thick flooring. The stapler has enough weight to make it a solid fastening tool, yet lightweight enough to use for hours without fatiguing. This is a great kit for the professional or homeowner. This tool's 20-volt battery works with all Dewalt 20-Volt Max tools.
Date de publication: 2017-06-30
Rated 5 de 5 de par Perfection! I was in the market for a flooring stapler to install some engineered hardwood flooring and came across this stapler. Decided to spend a few extra dollars and get this vs. a cheaper alternative option. I am glad I bought this stapler. The included battery lasted a long time and I didn't have any malfunctions when installing 400+ square feet of flooring. After a few minutes of setting up for the flooring I was putting down, it worked flawlessly and did not dimple the pre-finished flooring at all. I would recommend this stapler for anyone in the market for one.
Date de publication: 2017-12-10
Rated 4 de 5 de par The new DeWalt 20-Volt Max 18-Gauge Flooring Stapler (DCN682) is specifically designed for tongue... [This review was collected as part of a promotion.] The new DeWalt 20-Volt Max 18-Gauge Flooring Stapler (DCN682) is specifically designed for tongue and groove hardwood or engineered flooring. Until now, people installing wood flooring with power tools were tethered to an air hose and compressor. Although this is a heavy tool (compared to pneumatic staplers), the ergonomics are very good and it’s easy to use. Equipped with a brushless motor, the new Dewalt DCN682 20 Volt Max Flooring Stapler will shoot hundreds of 18-gauge ¼ inch narrow crown staples (1/2 to 1 ½ inch) on a single charge. The tool-free adjustable base includes non-marring tips and will accommodate flooring from 3/8 to 5/8 inches. It includes a selectable switch for sequential or rapid sequential modes, and an adjustable depth adjustment dial. The ergonomics are very good and includes a comfortable paddle style trigger. On the negative side, the DeWalt 20-Volt Max Stapler is not as fast as using a pneumatic stapler. It is better suited for smaller jobs. Overall I am very happy with the stapler and recommend it for contractors or DIY Projects.
Date de publication: 2017-07-09
Rated 5 de 5 de par This is a nice flooring stapler from Dewalt. It’s great to not need an extension cord or air com... [This review was collected as part of a promotion.] This is a nice flooring stapler from Dewalt. It’s great to not need an extension cord or air compressor and hose to install engineered flooring. The stapler is pretty small making it good for tight places. You do not need to swing a mallet. You just squeeze the trigger and bamb. The staple sinks nicely into the flooring. Battery life seems fine. Enough to nail a 10x12 foot room with battery left over. It charges in about an hour. An extra battery will come in handy for larger rooms. A nice stapler that compliments my other flooring tools. Great addition.
Date de publication: 2017-07-12
Rated 5 de 5 de par Excellent power and tool free adjustments [This review was collected as part of a promotion.] Dewalt DCN682M1 20V Max XR 18 Ga Flooring Stapler – Kit Weighing in at roughly seven pounds this is not a lightweight by any means but the way it is held while in use offsets the weighty cordless stapler, well designed and put together makes for a very nice looking tool. But does it perform? Loading the gun up was as simple as it could have been with 18 Gauge 1/4" narrow crown staples. I was using the one inch staples to connect some old hard wood flooring off cuts in order to try it out, first at 3/8” depth and then at 5/8”. Using the Paddle trigger provided easy use for multiple orientations and the results were spot on. Continuing to operate it at one staple per trigger squeeze I switch the easy switch rapid sequential actuation mode and again it shot about a dozen staples in quick succession using the paddle trigger. Again all perfectly aligned in the hard wood, both at 3/8 and 5/8. Despite using half a box of staples (500) it never jammed so I cannot comment on how easy it is to correct it. I continued operating it at different angles and again this proved at how well this was performing with using the last of the box and at this stage I felt that the staples were not quite going into the wood as before so I recharged the supplied 4 AH battery and opened another box of staples just to make sure that it was a low battery charge, Yep, with the recharged battery, the next 200 or so staples sank in as set up. I find this tool very easy to use and to change the depth and the angles required. Just as a curiosity I picked up a piece of 3” soft pine and tried putting a staple into it, It shot straight through and embedded itself into my work bench so be advised this is for a hard wood flooring. Best features… Brushless motor for extra life. Multi-functional lights are an excellent feature. Tool-free adjustment. Easy to hold and effortlessly alter angles and with a years warranty.
Date de publication: 2017-06-30
Rated 5 de 5 de par This flooring stapler is powered completely by the lithium ion battery... which is nice not to ne... [This review was collected as part of a promotion.] This flooring stapler is powered completely by the lithium ion battery... which is nice not to need to use gas, compressor, and hose. Its also nice to not have a cord getting in your way.. its easy to get it in any orientation or position that you need. The trigger is easy to use in any orientation. It drives the staples in completely and accurately. It holds 100 staples in the magazine, and its very easy to load and unload staples. If there's a staple jam, its easy to unjam. It comes with the stapler, lithium battery, a charger and kit bag.
Date de publication: 2017-07-08
Rated 2 de 5 de par Problems with jamming and height adjustment I bought this Dewalt 18-gauge floor stapler DCN682B as a special order through lowes in feb 2018. I bought it to do 2 rooms in 5/8” engineered hardwood that I purchased from Baird Brothers Lumber in Ohio. (Great flooring). I installed the first room (240 sq Ft) over the past 2 days (April 21 & 22). Overall I like the tool, but I had 2 main issue; jamming and no real depth adjustment. The jamming was obviously the biggest issue. I probably had to pull a nail out of the nailer every 3 rows. I was using Dewalt brand 1 1/2” staples. The hammer pin probably got stuck down 6 times on this 240 sq room. The depth adjustment changes the distance the engagement triggers are from the grove in the wood. So if you want to bring the staple closer to the surface, the adjustment pushes the tools engagement triggers farther out which means the left and right side white guides are now farther away from the grove and the no longer seat properly. This makes the tool wobble and I believe adds to the jamming issues. I ended up adjusting the staple depth for the deepest setting because that allowed me the most secure footing with the tool. In fact I couldn’t really properly adjust the DCN682B for the height of the wood until I set the staple depth adjustment all the way up. I couldn’t get it stable. A you tube video on doing the adjustment would be helpful. I couldn’t find any. So when the tool worked, and after I got comfortable with it, it was sweet. I could shimmy on my knees and place a staple every 3-4” on a 5’ pice of wood in about 10 seconds. I don’t know if my problems were from the Dewalt nails or an issue with the nailer, but this Dewalt System didn’t work as well as I had hoped. There needs to be better documentation on the height and depth adjustments.
Date de publication: 2018-04-22
Rated 5 de 5 de par Good tool, trusted manufacturer [This review was collected as part of a promotion.] I like DeWalt tools and have been very satisfied with the quality and durability of their products. This flooring stapler is a good addition to the arsenal of tools needed to do a variety of handyman work. The weight is OK, it’s not particularly lightweight, but to some extent that’s expected when using a tool with a battery attached and this one has a nice counter balance when holding it in the firing position. We had no issues with loading the staples and using the stapler.
Date de publication: 2017-07-03
  • y_2022, m_11, d_27, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_46
  • loc_fr_CA, sid_1001104142, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 23ms
  • REVIEWS, PRODUCT

Finally! But why not up to 3/4"? Will there be any attachments to be able install 3/4" hardwood? Thank you

Posée par: Marc
I just put down 600 feet of 3/4 oak prefinished. Used 1 1/2 staple. I have at least an 1 to inch staple in the subfloor. That floor is not going anywhere. You have 2 18 gauge pieces of steel about 1/8 inch apart. I would think that the recommended gauge for a fastener might apply to a single brad. I did have to pull up a couple of boards. Was not easy. I did use a cheep floor jack and screwed a 2x4 in the subfloor to bring the warped boards together before stapling.
Répondue par: terry
Date de publication: 2020-12-27

Does the flooring attachment come off for other type of jobs like crown molding our finish type work

Posée par: Jeff
No, it's just for flooring
Répondue par: BilltheEngineer
Date de publication: 2021-06-22

With the floor stapler am i able to take off the plastics that are pre set? What’s the length of ...

With the floor stapler am i able to take off the plastics that are pre set? What’s the length of the biggest staple it’s able to hold?
Posée par: Charles
No but they are adjustable 1.5 in staples
Répondue par: MELVIN
Date de publication: 2022-10-03

Will this penetrate 9/16" bamboo flooring?

Will this penetrate 9/16" bamboo flooring?
Posée par: Hellsbellsidaho
Thank you for your question. Short answer is that it should. I have now completed my new hard wood flooring which is 5/8" thick which is slightly deeper than your 9/16" bamboo flooring, and I used more than 1000 staples with excellent results on two charges. Each staple buried itself deep into the wood so that I didn't even have to go over them with a hammer as I have had to do after using other flooring staplers. I hope that this helps you decide.
Répondue par: Palaranda
Date de publication: 2021-06-22

Can the Dewalt DCN682 be used to install hardwood flooring with a thickness of 5/16 inches (e.g.,...

Can the Dewalt DCN682 be used to install hardwood flooring with a thickness of 5/16 inches (e.g., the Bruce Natural Choice line of thin profile hardwood)? I looked at the Dewalt manual online and it specifies a minimum flooring thickness of 3/8 inches, but I was wondering if in practice the tool can be adjusted to handle a slightly thinner product.
Posée par: GK
We have only tested our DEWALT DCN682 for use with the specific thicknesses. We believe the outlined thickness(3/8"-5/8") will give the best results with the tool.
Répondue par: DewaltProductExpert
Date de publication: 2019-01-30

can you use this on three-quarter inch oak flooring

can you use this on three-quarter inch oak flooring
Posée par: ish
No, this model is designed for 5/8" or less thick flooring. It is recommended to use a 15.5 or 16 gauge fastener for flooring thicker than 5/8".
Répondue par: Communityanswer
Date de publication: 2018-06-04

can you use bostitch staples with this stapler

can you use bostitch staples with this stapler
Posée par: huff
Yes, as long as they are the correct style and size.
Répondue par: BilltheEngineer
Date de publication: 2018-04-26

Will this gun work on 3/4 inch hardwood flooring?

Posée par: Jeff
No I do not recommend a floor stapler for that thick of would. I would use a floor nailer.
Répondue par: jaxc
Date de publication: 2021-08-16
  • y_2022, m_11, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_fr_CA, sid_1001104142, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 150ms
  • QUESTIONS, PRODUCT