L'événement du Centre de cadeaux pour la fête des Pères est en cours. N'attendez pas!  Magasiner l'événement

Aperçu

Modèle # DWAFBEXTRACT5 Internet # 1001180777

Les extracteurs à boulons à percussion DEWALT Max permettent aux utilisateurs de retirer les écrous, boulons et vis hexagonales endommagés, rouillés ou peints. Les cannelures en spirale inversée saisissent la tête hexagonale de la fixation, ce qui permet à l'utilisateur de s'extraire d'une grande variété de matériaux. Les extracteurs à boulons à percussion Max sont conçus pour résister à la puissance de couple élevée d'un tournevis à percussion et comprennent un adaptateur de 1/4 à 3/8 de pouce.

  1. Flûtes spirales inversées
  1. Pour l'extraction des écrous, boulons et vis hexagonales endommagés, rouillés ou peints.
  1. Les extracteurs sont conçus pour être utilisés dans un tournevis à percussion.
  1. Taille d'entraînement de 3/8 pouce
  1. Adaptateur 1/4 à 3/8 de pouce inclus
  1. Partie du système d'impact maxi
  1. Ensemble de 5 pièces

Spécifications

Dimensions

Hauteur assemblé (en pouces)
6.75
Hauteur de l’emballage (en pouces)
1
Largeur assemblée (en pouces)
1
Largeur de l’emballage (en pouces)
3.9
Poids assemblé (en livres)
0.38
Poids de l’emballage (en livres)
0.38
Profondeur assemblé (en pouces)
3.875
Profondeur de l’emballage (en pouces)
6.8

Détails

Article individuel, Ensemble
Ensemble
Caractéristiques des accessoires pour outils à moteur
Universel
Diamètre de la mèche (en po)
1/4
Idéalement utilisé avec
Perceuses
Longueur de la mèche (en po)
2-1/2
Matériau de la mèche
Acier
Nombre de pièces dans l'ensemble
6
Pays d'origine
US
Type de tige
Hex
Utilisation
Métal
À percussion ou ordinaires
À percussion
À une ou deux têtes
À une tête

Garanties et certifications

Pour plus d'informations, veuillez contacter le service clientèle de DEWALT : 1-800-4DEWALT (1-800-433-9258)
Ensemble d'extraction de boulon en acier à percussion MAX (5 pièces)DEWALT Ensemble d'extraction de boulon en acier à percussion MAX (5 pièces)Les extracteurs à boulons à percussion DEWALT Max permettent aux utilisateurs de retirer les écrous, boulons et vis hexagonales endommagés, rouillés ou peints. Les cannelures en spirale inversée saisissent la tête hexagonale de la fixation, ce qui permet à l'utilisateur de s'extraire d'une grande variété de matériaux. Les extracteurs à boulons à percussion Max sont conçus pour résister à la puissance de couple élevée d'un tournevis à percussion et comprennent un adaptateur de 1/4 à 3/8 de pouce.
DEWALT
1001180777
Ensemble d'extraction de boulon en acier à percussion MAX (5 pièces) est évalué 4.3 de 5 de 209.
  • y_2024, m_6, d_13, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_32, tr_177
  • loc_fr_CA, sid_1001180777, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 75ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Worked great for removing a seized and completely stripped oil pan plug After trying many solutions to remove a stuck and stripped plug bolt from an engine oil pan (DB Blaster, vice grips, a Gator Grip socket), the 1/2" piece in this set did the trick and twisted it free. Took a few attempts, but it eventually worked. Just be sure to tap it directly and squarely onto the head of the bolt you're trying to remove, not at any angle, and use a breaker bar or a longer-handled torque wrench. The whole set will likely come in handy again for future bolt problems! Happy with the quality and results for the price.
Date de publication: 2020-11-01
Rated 5 de 5 de par bncgarden I checked the website for a specific product and saw there was 15 in stock at aisle 13, bay 014. When I arrived and started to search, the items were not there....they were misplaced. An employee named Leroy approached me and asked how he could assist me. We searched high and low together and still could not find it. He asked me to wait while he searched other areas. I looked around while he was gone. A minute later he searched me out and had the item in his hand. Without his diligence, I wouldnt have the part I needed. Leroy went above and beyond. I will look for Leroy in the near future! Excellent customer service!!!
Date de publication: 2017-09-03
Rated 5 de 5 de par I got this because my mom's electric piano stand had... I got this because my mom's electric piano stand had cheap screws that stripped out the third time we tried to disassemble it. It got the screws out easily with these. The other methods I tried were to unscrew them with pliers and vice grips, but neither method worked. I ended up getting these (as opposed to the pointy screw type ones) because I thought that more metal would be more durable.
Date de publication: 2020-02-04
Rated 5 de 5 de par I had a stripped oil drain plug on my gas edger. No luck with the vice grips after repeated atte... I had a stripped oil drain plug on my gas edger. No luck with the vice grips after repeated attempts. I bought this set and was able to remove the plug in less than 30 seconds. Make sure you use the smallest possible possible extractor and then tap it onto the the bolt with a hammer as far as it will go. Highly recommend.
Date de publication: 2020-05-01
Rated 5 de 5 de par Had a stuck oil pan plug, was worried I had... Had a stuck oil pan plug, was worried I had to take the vehicle to a mechanic to get fixed but after further research saw this tool was available so in about 30 minutes and some money saved I was able to get it off successfully and replace the plug with a new one in a day. They dig in quite well and hold excellent
Date de publication: 2020-04-30
Rated 5 de 5 de par My Irwin set would only loosen a few of the ten bolts on my differential cover. Kept slipping on... My Irwin set would only loosen a few of the ten bolts on my differential cover. Kept slipping on the rest. I said well might a well try the Dewalts. Holy crap! The bite power was so much better. No slippage at all just brute force with my 17 inch breaker bar. Love this set!
Date de publication: 2019-10-08
Rated 5 de 5 de par I tried everything to remove a recessed nut from my... I tried everything to remove a recessed nut from my Jeep. Nothing worked. I used this tool and had the nut off in under a minute! I might not use it often, but if I have a stripped bolt or nut i nthe future it'll be my first choice.
Date de publication: 2020-08-05
Rated 5 de 5 de par My brake caliper bolts were completely stripped. I bought this... My brake caliper bolts were completely stripped. I bought this set hoping the extractor set will work. Put them on with a hamer and put some elbow torque on it and it came right off.
Date de publication: 2020-05-30
  • y_2024, m_6, d_13, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_32, tr_177
  • loc_fr_CA, sid_1001180777, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 46ms
  • REVIEWS, PRODUCT

Do these work on right and left hand threaded bolts?

Do these work on right and left hand threaded bolts?
Posée par: Andy
Just on bolts that are tightened clockwise as you view the head of the bolt.
Répondue par: Renter
Date de publication: 2023-09-11

Would they work on a 12 & 13 mm bolt head?

To remove a oil plug bolt?
Posée par: RG
Yes. Use the 1/2 socket with this set.
Répondue par: Renter
Date de publication: 2020-02-21

will this remove a 14mm striped nut

Posée par: Junior
No it will not work on a 14mm nut
Répondue par: Jras75
Date de publication: 2023-05-06

is there millimeter sizes?

is there millimeter sizes?
Posée par: rj
I used the closest available standard size equivalent and it worked.
Répondue par: Chris
Date de publication: 2023-05-05

will this work on a E10 inverted torx bolt? if yes what size? thx

Posée par: john
Hello john Thank you for your contact. We apologize for any trouble or inconvenience in finding information. It appears tat E10 inverted torx bolts look like they are used primarily in BMW automobiles. If it is an automobile, you may want to contact the manufacturer to see what is recommended. The 3/4th and 5/8th seem to be too large an too small respectively. You may want to look at the Irwin 53904 for an exact fit. Best Regards Sherri C DEWALT
Répondue par: DewaltProductExpert
Date de publication: 2022-01-26

Will these work on a broken bolt?

I was tightening my thermostat housing when my bolts broke off at the head leaving some of the thread sticking out. Not enough room to drill them out without taking off the manifold. Will these work to loosen up the broken bolt ?
Posée par: 97Coupe
Yes, these will work on a broken bolt.
Répondue par: Communityanswer
Date de publication: 2023-05-06

Will it take out rounded drain plug 13 mm square head

Posée par: Mrtom
Yes moat likely. This is what i used. And a fitted wrench.
Répondue par: Wicket
Date de publication: 2023-05-07

What sizes are included in this set?

Posée par: XHB133
1/4- thru 1/2”. It really needs a 9/16” (sold separately)
Répondue par: jeff
Date de publication: 2019-03-23
  • y_2024, m_6, d_13, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_fr_CA, sid_1001180777, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT