Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

DEWALT Scie à onglets simple biseau à câble de 15 ampères et 12 pouces

Modèle nº DWS715|Nº UGS 1001515199

Aperçu

Modèle # DWS715 Internet # 1001515199

La scie à onglet composée à un seul niveau de 12 pouces DEWALT DWS715 est alimentée par un moteur de 15 ampères qui tourne à 4 000 tr/min, offrant ainsi une puissance et une durabilité accrues. Cette scie à onglets de 12 pouces est équipée d'une plaque d'arrêt d'onglet en acier inoxydable et d'un verrouillage d'onglet à came qui offrent une précision répétable et une durabilité avec des réglages faciles. Cette scie à onglets DEWALT est dotée de hautes barrières coulissantes qui supportent 5-1/2 po de moulure de base à la verticale et 5-1/2 po de moulure de couronne emboîtée à la verticale. La conception légère et la poignée de transport intégrée en font une scie à onglet portable facile à transporter sur le chantier. Elle se replie pour un rangement facile dans votre atelier ou votre garage.

  1. Plaque d'arrêt d'onglet en acier inoxydable avec 14 butées positives
  1. Système d'onglet précis et support de clôture à base usinée
  1. Une haute clôture coulissante supporte une base de 5-1/2 pouces verticalement
  1. Biseautage de 0 à 48 à gauche et de 0 à 3 à droite
  1. Capacité de coupe transversale de bois de dimension 2 pouces x 8 pouces à 90° et de bois de dimension 2 pouces x 6 pouces à 45
  1. 15 Ampères
  1. 4000 RPM
  1. Tonneau de 5/8 de pouce ou de 1 pouce

Spécifications

Dimensions

Hauteur assemblé (en pouces)
18.89
Hauteur de l’emballage (en pouces)
18.9
Largeur assemblée (en pouces)
21.84
Largeur de l’emballage (en pouces)
21.85
Poids assemblé (en livres)
44.74
Poids de l’emballage (en livres)
44.75
Profondeur assemblé (en pouces)
26.76
Profondeur de l’emballage (en pouces)
26.77

Détails

Accessoires compris
Sacs, Lames
Ampérage
15
Caractéristiques de la scie
Sac inclus, Dispositif de verrouillage de broche, Butées fixes, Système de protège-lame, Pièces comprises
De batterie inclus
Non
Diamètre de la lame
12
Guide de coupe au laser
Non
Largeur de coupe (en pouces)
8
Matériau utilisable
Bois
Moteur
Moteur à balais
Nombre de piles comprises
0
Nombre de vitesse
1
Pays d'origine
TW-Taiwan
Portatif ou fixe
Stationnaire
Sans fil/avec fil
Avec fil
Tension (en volts)
120
Type d'outil à moteur
Scies à onglets
Type de pile, de batterie ou dalimentation
Raccordement fixe
Vitesse variable
Non

Garanties et certifications

Garantie de remboursement de 90 jours. 1 an de service gratuit. Garantie limitée de 3 ans. Pour plus d'informations, veuillez contacter le service clientèle de DEWALT : 1-800-4DEWALT (1-800-433-9258).
Scie à onglets simple biseau à câble de 15 ampères et 12 poucesDEWALT Scie à onglets simple biseau à câble de 15 ampères et 12 poucesLa scie à onglet composée à un seul niveau de 12 pouces DEWALT DWS715 est alimentée par un moteur de 15 ampères qui tourne à 4 000 tr/min, offrant ainsi une puissance et une durabilité accrues. Cette scie à onglets de 12 pouces est équipée d'une plaque d'arrêt d'onglet en acier inoxydable et d'un verrouillage d'onglet à came qui offrent une précision répétable et une durabilité avec des réglages faciles. Cette scie à onglets DEWALT est dotée de hautes barrières coulissantes qui supportent 5-1/2 po de moulure de base à la verticale et 5-1/2 po de moulure de couronne emboîtée à la verticale. La conception légère et la poignée de transport intégrée en font une scie à onglet portable facile à transporter sur le chantier. Elle se replie pour un rangement facile dans votre atelier ou votre garage.
DEWALT
1001515199
CAD4792022-09-28
Home Depot Canada
Scie à onglets simple biseau à câble de 15 ampères et 12 pouces est évalué 4.7 de 5 de 451.
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_64, tr_387
  • loc_fr_CA, sid_1001515199, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 21ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Excellent Saw! [This review was collected as part of a promotion.] I bought this saw in January after spending many months researching miter saws. It was my first time purchasing a miter saw, and as a homeowner and DIYer, I knew that I wanted a high quality saw that would last many years, but didn’t need every upgrade available. This saw has delivered on every front! It was easy to set up, the blade was perfectly square right out of the box, and makes consistent, accurate cuts every time. I’ve used it to make a variety of cuts on a number of projects and have been very happy with it every time. If you’re looking for a great value that doesn’t compromise on quality, this is the saw for you!
Date de publication: 2019-06-26
Rated 5 de 5 de par Best chop saw I've ever used! [This review was collected as part of a promotion.] Bought this saw close to a year ago and it is currently on my second home remodel as well as a number of woodworking projects. It cuts dead on and stay that way without and fiddling around. The only blades ive used so far are finish blades and even with those it doesnt feel slow cutting through joists or posts. I always feel completely confident in this saw. The one thing i wish it had was a small gap between the fence and the table where some dust could hide and not have to be blown out between each cut.
Date de publication: 2019-07-02
Rated 1 de 5 de par Design and Fabrication Issues Bevel angle gauge on the right hand side is terrible for reference view vs the other saws (DWS716, 779, etc) that have the bevel gauge in the middle of the saw. Also, the screw to adjust the angle on the bevel gauge is difficult to either reach with a regular screwdriver or undo with a shorty. The 45 degree cuts on the can't be fully made with the top fence of the left hand side attached due to the blade guard arm (black piece) hitting the fence. A simple solution would have been a cut slot in the top fence to allow use. Aluminum fence came from the factory out of square vertically with the base, for which no adjustment directions are given. Will ask for a warranty replacement.
Date de publication: 2020-07-14
Rated 1 de 5 de par I returned the saw due to the inability to change the blade. The factory over tightened the nut t... I returned the saw due to the inability to change the blade. The factory over tightened the nut that needs to be removed with the included wrench in order to change the blade. The problem is you can not remove the nut (yes, I was turning it in the correct direction) without stripping it. Dewalt should go back to using regular nuts that can be removed by a regular socket wrench (and therefore more torque could be applied without stripping the nut). The saw seems to be great if only you could replace the blade. I have read reviews of others having the same issue. I have been a fan of Dewalt but they have made an engineering mistake on this saw. Too bad since other than that, I believe I would have loved this saw.
Date de publication: 2021-04-21
Rated 5 de 5 de par It comes with 32T blade. I bought 80T blade for my baseboard installation project, $54, it is ki... It comes with 32T blade. I bought 80T blade for my baseboard installation project, $54, it is kind of expensive, but works really well, cutting is very clean. I don't see any problem with this saw.
Date de publication: 2019-10-30
Rated 5 de 5 de par Excellent single bevel compound miter saw. I upgraded the... Excellent single bevel compound miter saw. I upgraded the blade to a 80 tooth blade and the cuts are precise. I am using for DIY projects so didn't need the double bevel function, and didn't want the extra weight and size of those models. My only gripe is the dust collection port which is smaller than the standard wet/dry vac attachment. I have not been able to find the universal adapter and wish they would have used the same diameter port for quick attachment to a standard wet/dry vac. I don't have this problem with the Dewalt table saw which has a dust port that fits perfectly with my wet/dry vac.
Date de publication: 2021-01-14
Rated 5 de 5 de par Excellent Saw, Great Features [This review was collected as part of a promotion.] I purchased this saw in 2010 after returning from working in England and buying a fixer-upper home that needed lots of "fixing up". It has worked flawlessly everytime I use it and cuts like a charm. I only wish I would have gone with the double bevel, sliding compound miter saw. I highly recommend and will certainly buy other DeWalt equipment (and, in fact, have over the years).
Date de publication: 2019-11-07
Rated 3 de 5 de par Well designed but so light and inexpensively made that I do not see it lasting long. That is too ... Well designed but so light and inexpensively made that I do not see it lasting long. That is too bad because it is a construction site saw, not a carpenter's saw - things are not square and true enough for high accuracy, especially the aluminum fence. Get a stand for it - that light base needs an anchor. I still gave it a 'recommend to buy' because of the price/performance ratio. I'd still rather have this thing spinning a big blade right next to my hand than some other inexpensive saws I have seen.
Date de publication: 2021-02-15
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_64, tr_387
  • loc_fr_CA, sid_1001515199, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Does the DWS work well using standard USA house current?

Posée par: robber
Yes it works fine.
Répondue par: sleahy
Date de publication: 2022-09-18

Does this model come with a kit of a blade, clamp and bag?

Posée par: Brian
Yes it does 
Répondue par: Boomerang
Date de publication: 2022-09-18

Does it have a laser or a light?

Posée par: Jimmy
No
Répondue par: RedRock
Date de publication: 2021-01-25

Model number shows DWS715, yet overview shows model number DW715. Which is it ?

Model number shows DWS715, yet overview shows model number DW715. Which is it ?
Posée par: Bob
DWS715 is correct.
Répondue par: Guillermo
Date de publication: 2020-08-29

Does DEWALT make a comparable cordless saw, i.e. one that can cut a 4X4?

Does DEWALT make a comparable cordless saw, i.e. one that can cut a 4X4?
Posée par: Rich
They do, but the price is much higher.
Répondue par: Bak
Date de publication: 2022-09-18

Will this cut a 4x6?

Posée par: Kev
Yes it will. Good luck with your project!
Répondue par: Intotoland
Date de publication: 2022-09-18

If I change the blade to a proper metal blade, can this miter saw be used for cutting metal pipe ...

If I change the blade to a proper metal blade, can this miter saw be used for cutting metal pipe and square tube?
Posée par: SteveB
It will cut the metal pipe and a square tube with a metal blade. I would say at least up to 2" pipe if not a bit bigger.
Répondue par: Noah
Date de publication: 2021-02-20

Is this model a sliding compound saw?

Is this model a sliding compound saw?
Posée par: weelis
No, this is not a sliding compound saw.
Répondue par: Communityanswer
Date de publication: 2020-08-29
  • y_2022, m_9, d_28, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_45
  • loc_fr_CA, sid_1001515199, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 52ms
  • QUESTIONS, PRODUCT