L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # DHS4250 Internet # 1001299919

Les nouvelles scies à trous haute performance de Diablo offrent des performances de coupe plus rapides et une productivité accrue. Contrairement à tout ce qui est sur le marché, le système de scie à trou et la conception mandrin de Diablo simplifient le processus d'attachement pour un montage rapide et efficace de la scie à trou. Ces nouvelles scies à trous radicales fournissent une longueur de coupe ultime pour percer des trous plus profonds en un seul passage, une éjection de bouchon sans outil et une conception dentaire variable pour des coupes plus rapides.

  1. Profondeur de coupe de 60 mm (2 3/8 po) pour des trous 40 % plus profonds en un seul passage et une productivité accrue
  1. Percer des trous plus profonds en un seul passage
  1. Éjection de fiche sans outil pour un retrait rapide des matériaux
  1. La conception variable de dent fournit des coupes plus rapides avec moins de vibration
  1. Compatible avec le système de mandrin SnapLock Plus de Diablo pour des changements de tasse rapides et faciles sans temps d'indécent
  1. Perce le bois, le plastique, l'aluminium, le métal et l'acier inoxydable
  1. À utiliser avec une perceuse ou une perceuse à main
  1. Mandrin Diablo Snap-Lock requis. Vendu séparément (SKUs: 1001299931 / 1001299930 / 1001299929)

Spécifications

Dimensions

Hauteur assemblé (en pouces)
7.88
Hauteur de l’emballage (en pouces)
7.88
Largeur assemblée (en pouces)
6.75
Largeur de l’emballage (en pouces)
6.75
Poids assemblé (en livres)
1.27
Poids de l’emballage (en livres)
1.27
Profondeur assemblé (en pouces)
4.63
Profondeur de l’emballage (en pouces)
4.63

Détails

Arbre inclus
Non
Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Universel
Diamètre de la mèche (en po)
4
Idéalement utilisé avec
Perceuses
Matériau de la mèche
Bimétal
Matériau de la pointe
Bimétal
Matériau utilisable
Métal
Nombre de pièces dans l'ensemble
1
Pays d'origine
CN-China
Type d'accessoire pour outils à moteur
Scies-cloches et accessoires
Type de mèche
Scies-cloches
Type de tige
Hex
Utilisation
Tout usage

Garanties et certifications

Ce produit porte une garantie de retour de 90 jours. Veuillez nous contacter au 1-800-263-7016 ou à l'adresse canadasupport@freudtools.com si vous avez des questions ou si vous souhaitez obtenir des informations supplémentaires.
Scie-cloche bi-métallique 4 po1/4 po avec profondeur de coupe 2 3/8 po pour bois/métal/plastiqueDiablo Scie-cloche bi-métallique 4 po1/4 po avec profondeur de coupe 2 3/8 po pour bois/métal/plastiqueLes nouvelles scies à trous haute performance de Diablo offrent des performances de coupe plus rapides et une productivité accrue. Contrairement à tout ce qui est sur le marché, le système de scie à trou et la conception mandrin de Diablo simplifient le processus d'attachement pour un montage rapide et efficace de la scie à trou. Ces nouvelles scies à trous radicales fournissent une longueur de coupe ultime pour percer des trous plus profonds en un seul passage, une éjection de bouchon sans outil et une conception dentaire variable pour des coupes plus rapides.
Diablo
1001299919
CAD61.342024-02-28
Home Depot Canada
Scie-cloche bi-métallique 4 po1/4 po avec profondeur de coupe 2 3/8 po pour bois/métal/plastique est évalué 4.0 de 5 de 195.
  • y_2024, m_2, d_27, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_39, tr_156
  • loc_fr_CA, sid_1001299919, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 54ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Teeth Break Down Quickly Avoid these unless you’re only working with aluminum or wood. I purchased two of the Diablo holesaws to see how well they work and both broke down very quickly in 1/4 inch thick mild steel. The first I used with a hand drill and was able to drill three holes before the carbide inserts broke off to the point it would no longer cut. Thinking it was user error and I was doing a poor job controlling the drill I purchased a replacement to use in a drill press. The second holesaw actually did much worse and was only able to cut two holes. I will go back to using Lenox products which from my experience have out performed these 10x
Date de publication: 2020-10-23
Rated 5 de 5 de par I used this saw with my drill press to cut several hundred holes in cedar boards to be used as pl... I used this saw with my drill press to cut several hundred holes in cedar boards to be used as planters and wine caddies for a Temecula Valley Garden Club fundraiser. It worked great.
Date de publication: 2019-01-29
Rated 5 de 5 de par Home handyman I had to provide mounting holes for new pot lights over a new address sign above my garage door. I had to drill 3 holes through aluminum soffit and 1/4 in ply wood. Oned hole was already there but was not round. I had to devise bracing that I could screw in place to provide for the pilot bit and also cut the areeas not round. I used a variable speed drill with success. The other 2 holes were like cutting butter with a hot knife. Very pleased with the result. Cost was more than expected as I had to purchase the hole saw and the mandrel to attach to the hole saw. None of the mandrels that I had would fit the new hole saw
Date de publication: 2020-12-21
Rated 5 de 5 de par I used this for cutting out a circle in a... I used this for cutting out a circle in a cot hole board. Did the trick. Note that your I’ll need to purchase the arbor and they lock to get her, it’s kinda a pain to setup bout works. Very finicky. Good quality metal and nice enough product. I found it easer to pre drill a pilot hole separate from the arbor but in the center of the 6inch hole to start the drill because other it can be difficult to line up. Also note this thing needs a lot of power. My battery brushless hammer drill didn’t do it, I needed to bust out the corded rigid drill, with that it worked perfect. I am sure you could use a battery drill with less power but it would not be as easy. Also watch for kickback so that you don’t break your wrist. Hope this helps.
Date de publication: 2021-03-17
Rated 1 de 5 de par Should state more clearly that this product does NOT include... Should state more clearly that this product does NOT include a mandrel and CANNOT be used by itself. This is misleading marketing aimed a people who want a cheaper hole saw option. You buy this, realize you need the $20 mandrel, and end up spending just as much as you would otherwise.
Date de publication: 2020-01-07
Rated 5 de 5 de par CUT 3.5" THICK STEEL FLIGHT DECK These are stellar class hole saws. I was able to drill through 3.5" solid steel of a Aircraft carrier flight deck. i had to tig weld two hole saws together but it worked awesome. the teeth made it through 2 of these holes. if your getting 1 cut out these you need to slow cutting speed WAY down and lubricate the teeth.
Date de publication: 2022-02-16
Rated 1 de 5 de par Requires Diablo Mandrel to function Without the Diablo proprietary Mandrel the product is unusable. This is not clearly stated in the description. I should have read the reviews as other have had the same experience. I have used other Diablo products and just trusted the brand - lesson learned And now I have to wait another 7 to 10 days to get the next delivery of the essential part to make it work.
Date de publication: 2020-05-07
Rated 1 de 5 de par It shipped pretty quickly. When I attached the mandrel to the hole saw I noticed that the centeri... It shipped pretty quickly. When I attached the mandrel to the hole saw I noticed that the centering drill bit seems a bit loose. I started to drill a hole in 14 gauge steel but the hole saw wobbled and wandered - unacceptable! What I ended up doing was put the hole saw in my drill press and started drilling a hole into a piece of 1 inch thick wood. Then I clamped the piece of 1" thick wood to the metal piece I was drilling. this kept the hole saw from wandering and I was able to cut the hole OK, but I do not like this mandrel set up at all, so be aware!
Date de publication: 2017-12-12
  • y_2024, m_2, d_27, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_39, tr_156
  • loc_fr_CA, sid_1001299919, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 24ms
  • REVIEWS, PRODUCT

Will this saw cut a clean hole in 18 gage sheet metal?

Will this saw cut a clean hole in 18 gage sheet metal?
Posée par: Rono
Hi Rono! For thin metal cutting, it is important to control the speed and vibration of the material. This can ensure a clean hole while drilling in very thin material.
Répondue par: DiabloProductExpert
Date de publication: 2023-05-07

can this be used with an extender

can this be used with an extender
Posée par: heather
No, it can't.
Répondue par: Communityanswer
Date de publication: 2023-05-06

can this be used to cut cement board / hardie board?

can this be used to cut cement board / hardie board?
Posée par: Jim
I did not use it on this material, but I would assume it would be effective for them.
Répondue par: kbox
Date de publication: 2019-07-16

will this attach to my drill out of the box, or do I have to buy some sort of hex adapter with it...

will this attach to my drill out of the box, or do I have to buy some sort of hex adapter with it? The pictures mention and show a "mandrel", but it's not clear if that's included. thx.
Posée par: Basementbum
You have to buy the snap lock adapter to go with it.
Répondue par: oldbigt
Date de publication: 2023-05-06

would like to use this to make a plug for a hole in a wood floor....what size plug would this pro...

would like to use this to make a plug for a hole in a wood floor....what size plug would this produce. i.e. if it leaves 2-3/8 hole, what diameter would the leftover wood plug be? 1/4 less? Thanks,
Posée par: Dave
Hi Dave, thanks for reaching out! This will have a slight tolerance for the plug, but it should be less than 1/16” difference.
Répondue par: DiabloProductExpert
Date de publication: 2023-05-07

does this come with an arbor and pilot bit?

does this come with an arbor and pilot bit?
Posée par: Frank
Hi Frank, no this product does not.
Répondue par: DiabloProductExpert
Date de publication: 2023-05-07

Does this include the drill/mandrel? or do you buy that separate? Not clear from the images

Does this include the drill/mandrel? or do you buy that separate? Not clear from the images
Posée par: Handy
If you mean the snap adapter. It does not come with it.
Répondue par: oldbigt
Date de publication: 2023-05-06

Is this hole saw compatible with Milwaukee arbor/mandrel?

Is this hole saw compatible with Milwaukee arbor/mandrel?
Posée par: Mike
Yes and no, requires you to buy their special tool to use this. So the $20 hole saw turns into a $40 one. Most people don’t even need to quick release tool either. Should be a feature not a requirement.
Répondue par: CURTIS
Date de publication: 2023-05-07
  • y_2024, m_2, d_27, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_38
  • loc_fr_CA, sid_1001299919, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 73ms
  • QUESTIONS, PRODUCT