Articles pour l’extérieur et terrasses Climatisation et chauffage Cuisine Cuisson à l'extérieur et barbecues Décor et Meubles Électricité Électroménagers Gazon, pelouse et centre jardin Luminaires et ventilateurs de plafond Maison intelligente Matériaux de construction Organisation et entreposage Outils Peinture Plomberie Portes et fenêtres Produits nettoyants Quincaillerie Revêtements de sol Salle de bain Stores et habillages de fenêtre Terrasses, bois de consturction et composite Tous les départements Centre de cadeaux pour la fête des Pères ÉVÈNEMENT mobilier de jardin
Livraison en 3 heures à partir de 12,97 $*  En savoir plus
Dremel MM473U Lame osc. 1¼ po fine bois

Dremel MM473U Lame osc. 1¼ po fine bois

Modèle nº MM473U|Nº UGS 1001650979

Aperçu

Modèle # MM473U Internet # 1001650979

Les lames à double interface universelle de Dremel sutilisent sans adaptateur. Linterface unique convient à tous les outils oscillants sauf ceux à interface Starlock. Cette lame oscillante de 1¼ po à double interface en acier haut carbone pour les coupes fines du bois est parfaite pour les travaux de découpage fin comme les encoches dans les armoires ou les trous de registre dans les planchers stratifiés ainsi que pour le découpage de moulures, de plinthes, dembrasures de porte et de matériaux de terrasse.

  1. La double interface universelle se raccorde directement sans adaptateur à tous les outils oscillants, sauf StarLock
  1. Compatible avec Dremel, Bosch, Makita, Milwaukee, Rockwell, DeWalt, Fein, Porter Cable et Ridgid
  1. Géométrie japonaise des dents pour la précision dans les applications de coupe du bois
  1. Lame durable en acier à haute teneur en carbone

Spécifications

Dimensions

Hauteur assemblé (en pouces)
0.668
Hauteur de l’emballage (en pouces)
0.67
Largeur assemblée (en pouces)
4
Largeur de l’emballage (en pouces)
4
Poids assemblé (en livres)
0.09
Poids de l’emballage (en livres)
0.09
Profondeur assemblé (en pouces)
6
Profondeur de l’emballage (en pouces)
6

Détails

Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Magnétique, Universel
Idéalement utilisé avec
Outils oscillants
Interface
Dos fermé
Matériau de la lame
Bimétal
Nombre de pièces dans lensemble
1
Pays d'origine
CH-Switzerland
Type d'accessoire pour outils à moteur
Accessoires pour outils à mouvement oscillatoire
Type d'accessoires pour outils à mouvement oscillatoire
Candélabre
Type d'applications
Coupe
Type de tige
Universel

Garanties et certifications

Please Visit Dremel Website
MM473U Lame osc. 1¼ po fine boisDremel MM473U Lame osc. 1¼ po fine boisLes lames à double interface universelle de Dremel sutilisent sans adaptateur. Linterface unique convient à tous les outils oscillants sauf ceux à interface Starlock. Cette lame oscillante de 1¼ po à double interface en acier haut carbone pour les coupes fines du bois est parfaite pour les travaux de découpage fin comme les encoches dans les armoires ou les trous de registre dans les planchers stratifiés ainsi que pour le découpage de moulures, de plinthes, dembrasures de porte et de matériaux de terrasse.
Dremel
1001650979
MM473U Lame osc. 1¼ po fine bois est évalué 4.7 de 5 de 35.
  • y_2023, m_6, d_7, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_34
  • loc_fr_CA, sid_1001650979, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 97ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Fits about any Multi Tool! [This review was collected as part of a promotion.] I tried this narrow fine cutting wood blade in my Dewalt Multi Tool. The machine pattern fits into this blade housing on the outer ring perfectly. I noticed this blade mounting point had some sharp corners and was not finished very well, but it is a consumable blade and fits many tools. It cut a variety of woods with no burning and was a swift cut that was easy to start. I really liked that it would fit many different tools. I found the price to be on the lesser side of most bits and so far the cutting teeth have held up on par or better than most blades of this shape and use.
Date de publication: 2022-09-05
Rated 5 de 5 de par Great for cutting and works in my DeWalt oscillating tool [This review was collected as part of a promotion.] Oscillating tools are some of the most versatile for cutting materials, particularly making rectangular cut-outs without having to drill and cut with a jigsaw. I have used several brands, most recently Dremel and DeWalt. This blade from Dremel can fit in either, as well as many other brands – but I can’t personally vouch for that as I have only tried it in those two. Note that this particular blade is for wood and is labeled as “fine cutting”. So far it has done a good job for me in producing smooth cuts on soft to medium woods. Good product!
Date de publication: 2022-09-09
Rated 5 de 5 de par High quality, long lasting and quick material rmvl [This review was collected as part of a promotion.] This thing cuts quickly and smoothly. I had a substantial amount of wood I needed to cut out (6" thick x 62" long) mostly yellow pine with a layer of 1/2" plywood sandwiched in there. I made it almost halfway through this with a previous blade then it was time for this guys to come bat clean-up. It fared quite well and got me nearly finished up. I had to change it out because the cutting was signifigantly slowing, but still getting the job done Quite an Impressive amount of life as these blades in my experience dont usually last too long before dulling out and smoking through the wood The blade fit smoothly into both a Dewalt, and Rockwell tool
Date de publication: 2022-09-15
Rated 5 de 5 de par Dremel Duty [This review was collected as part of a promotion.] I just moved into a new condo and it had sliding glass doors. The locks were flimsy. My solution came from Home Depot. I decided to use PVC pipe to block the slider but I had no way to cut it and did not know the exact size. The solution was a Dremel universal blade that would fit my Rigid oscillating tool. The Dremel made a fine clean cut with minimal mess. It seemed to melt right through the PVC with out damaging to the pipe. I have used a Dremel blade on wood, aluminum, vinyl flooring and now PVC. They are very versatile.
Date de publication: 2022-08-20
Rated 5 de 5 de par Another Great Blade From Duracell [This review was collected as part of a promotion.] Dremel Universal 1-1/4 in. Fine Cutting Oscillating Multi-Tool Blade is another of Dremels great blades. This blade made for use on many of the other manufactures of oscillating tools permits the use of good quality places. The configuration of offset allows for close cuts in tight places. The blade is rugged and should provide long time use.No adapter needed also is a plus as speeding the changing of blades. This blade makes a nice fine cut.
Date de publication: 2022-08-22
Rated 5 de 5 de par Held Its Shape, Held Sharpness [This review was collected as part of a promotion.] I have both the Multi-Max MM40 and MM50 and tested the MM473U on each. The fit oddly enough was easier on the older model MM40, which I account to the MM50 being almost new out of the box, and my not being used to the new screw down for the blade on MM50. I used the MM473U on an older Cedar Fence to raise bottom from encroached soil. I snapped a line along the bottom of the fence and cut an even line along the fence sections running some 60 Yards total. The MM473U held in place tight and even throughout as the heat built up in the 95 degree Houston Texas heat and the the Multi-Max constantly running for the 20 minutes of constant use. Try bending over and getting a tool and its blade to cut straight, it's a good test, it held the firm, it did not bend.
Date de publication: 2022-09-22
Rated 5 de 5 de par Exceptionally Handy! [This review was collected as part of a promotion.] The Dremel Universal 1-1/4 in. Fine Cutting Oscillating Multi-Tool Blade is a very handy tool to have. It is great for a small cutting job or trimming a door frame without removing it. It has a million uses if you are an active DIYer. It is great for cutting a piece of PVC pipe or copper pipe. It is well made and very sturdy. I would definitely recommend the Dremel Universal 1-1/4 in. Fine Cutting Oscillating Multi-Tool Blade.
Date de publication: 2022-09-06
Rated 5 de 5 de par MM473U 1-1/4 In. Wood Fine Cut Oscillating Blade [This review was collected as part of a promotion.] I used the MM473U 1-1/4 In. Wood Fine Cut Oscillating Blade in conjunction with the MM476U to re-purpose an old craft fair display. I cut the smaller shelves from the base using the MM473, it was the perfect size to get in between the small shelves. Attaching the blade was simple. The product cut quickly and cleanly at speeds from low to high. The blade retained its shape and did not appear to lose sharpness.
Date de publication: 2022-09-07
  • y_2023, m_6, d_7, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_34
  • loc_fr_CA, sid_1001650979, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 79ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 88ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;