L'événement du Centre de cadeaux pour la fête des Pères est en cours. N'attendez pas!  Magasiner l'événement

Aperçu

Modèle # 8865-6 Internet # 1000495178

Ce kit pour installer les grilles de plafond contient les outils et les matériaux nécessaire pour installer les grilles de plafond dans une chambre de 6 m x 6 m (37 m2). Le kit contient un manchon adaptateur de foret de tire-fond, 2 pinces de grille, 19.5 m de câble de suspension de calibre 18, 16 tire-fonds pour poutrelles en bois, 20 rivets blancs, 15.2 m de ligne pour mise à niveau et un manuel dutilisation. Les outils pour l'installation de faux-plafond et les fixations de marque Suspend-It sont bien connus pour leur qualité, prix, facilité d'utilisation, performance et durabilité.

  1. Contient un manchon adaptateur de foret de tire-fond, des pinces de grille, un câble de suspension, des vis, des rivets et une ligne pour mise à niveau
  1. Manuel d'utilisation inclus
  1. Contient tous les accessoires nécessaire pour installer une grille de faux-plafond dans une chambre de 6 m x 6 m
  1. Idéal pour les bricoleurs ou les installateurs professionnels

Spécifications

Dimensions

Hauteur assemblé (en pouces)
6.75
Hauteur de l’emballage (en pouces)
7.03
Largeur assemblée (en pouces)
6.75
Largeur de l’emballage (en pouces)
7.03
Poids assemblé (en livres)
1.05
Poids de l’emballage (en livres)
1.21
Profondeur assemblé (en pouces)
1
Profondeur de l’emballage (en pouces)
0.94

Détails

Pays d'origine
CN-China
Type d'accessoires pour plafond
Outils pour plafond

Garanties et certifications

Code d'article #8865, Garantie Limitée de 30 JOURS, Service à la Clientèle 800-840-9436
Kit pour Installer les Grilles de Plafond, contient un adaptateur de foret, pinces de grille, câble, vis, rivets et ligneEvebilt Kit pour Installer les Grilles de Plafond, contient un adaptateur de foret, pinces de grille, câble, vis, rivets et ligneCe kit pour installer les grilles de plafond contient les outils et les matériaux nécessaire pour installer les grilles de plafond dans une chambre de 6 m x 6 m (37 m2). Le kit contient un manchon adaptateur de foret de tire-fond, 2 pinces de grille, 19.5 m de câble de suspension de calibre 18, 16 tire-fonds pour poutrelles en bois, 20 rivets blancs, 15.2 m de ligne pour mise à niveau et un manuel dutilisation. Les outils pour l'installation de faux-plafond et les fixations de marque Suspend-It sont bien connus pour leur qualité, prix, facilité d'utilisation, performance et durabilité.
Evebilt
1000495178
Kit pour Installer les Grilles de Plafond, contient un adaptateur de foret, pinces de grille, câble, vis, rivets et ligne est évalué 3.9 de 5 de 95.
  • y_2024, m_5, d_30, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_16, tr_79
  • loc_fr_CA, sid_1000495178, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 77ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Poor Quality I usually don’t review items, but I needed to make an exception for this product. As others noted, the string is useless. Use mason line instead. The clamps broke after I used them once, so plan on using different clamps (spring clamps worked well for me). The lags and driver worked for me, but I didn’t need many of them for my small project so I can’t tell home long the driver will last on a project. The wire is rather thin, so I needed to hang some extra supports and also get some thicker wire as a safeguard. Overall, you’d be better getting quality components by themselves instead of this kit. Doing so will cost more, but you’ll also get products that are useful.
Date de publication: 2018-03-16
Rated 2 de 5 de par Really not for 400 sq ft I bought two packages thinking it would be enough, but after some planning realized it was not. I installed a ceiling using 8 ft hangers (because that is what would fit in my vehicle) and needed 2 hangers (4 eye lag screws) for every row. 16 eye lag screws were enough to do 4 rows and that was it. So make sure you read what is in the package. Mine came with instructions, the leveling line is junk. I anchored my ceiling to my block wall in the basement, so I didn't use anything but the eye lag screws. So I ended up buying a box of 100 for $35 on Amazon, which I should have just done in the first place.
Date de publication: 2013-03-12
Rated 1 de 5 de par Kit is not worth using This kit will add time to your installation, do not bother with it. The lag screw driver broke - the collar that goes around it is made of plastic and snapped off on second screw. The line you stretch out to ensure it is level is weak and breaks too easy when you try to pull it tight. wire is wound tight so it has memory, after time it seems to settle more causing it to not be level. You need to pre-stretch/straighten it as much as you can. you cannot give zero stars or I would
Date de publication: 2015-02-10
Rated 1 de 5 de par No instructions included as listed Packaging states instructions included. no instructions are included, or web page to download, or contact help number.
Date de publication: 2012-04-22
Rated 1 de 5 de par the 2 ceiling clips are useless, 1 broke after 1... the 2 ceiling clips are useless, 1 broke after 1 use. Dryline for leveling/ used 1 time, its stranded, garbage -use black fishing line. only thing good are lags and the driver. Even the ceiling hangar wire is really undersized, do not use with a heavy laying fixture.
Date de publication: 2018-02-22
Rated 4 de 5 de par Instructions Upon opening the package I could not find the instillation instructions, am a first time user of this type of product..
Date de publication: 2012-02-26
Rated 2 de 5 de par My job had less than 400 square feet. we... My job had less than 400 square feet. we needed twice as many hanging screws as that supplied. The bit used to screw in the hanging hooks bent to where it was no longer usable about 1/2 way through the job. It was useful to have all of these things, but there should be enough for the job and a tool that fails 1/2 way through the job is simply unacceptable.
Date de publication: 2018-12-15
Rated 3 de 5 de par Ceiling installation kit All I needed for the job was the eye screws, but the store didn't have them, so I bought the kit. The driver broke on the third screw. I've done several ceilings, so I went to my regular one, which is all steel. The wire is too light for me, so I bought a bundle of 16 gauge wires. It is an OK kit for someone who has never done ceilings before and just needs to do one job, but I would rather have been able to buy what I needed separately.
Date de publication: 2014-03-20
  • y_2024, m_5, d_30, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_16, tr_79
  • loc_fr_CA, sid_1000495178, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 47ms
  • REVIEWS, PRODUCT

Will this grid system work with the genesis mono Serra ceiling panels...2ft by 2ft?

Posée par: Tracy
If the tiles are slightly less that 2'x2', I believe they will work for holding up the gridwork.
Répondue par: BillAllThumbs
Date de publication: 2023-05-03

Can I use this to install Donn (USG) ceiling grid?

Can I use this to install Donn (USG) ceiling grid?
Posée par: Kcnak
Good day, Yes, this should work with the Donn (USG) ceiling grid. Thank you for choosing QEP. Customer Service
Répondue par: The Manufacturer
Date de publication: 2023-05-06
  • y_2024, m_5, d_30, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_fr_CA, sid_1000495178, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 85ms
  • QUESTIONS, PRODUCT