L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # RAGEBLADE Internet # 1001203826

L'évolution RAGEBLADE est une lame multi-matériaux à pointe de carbure de tungstène de 7-1 / 4 po conçue pour les scies circulaires et à tronçonner. Parfait pour avoir sur le chantier et vous permet d'accomplir le travail plus rapidement sans avoir à changer de lame. Conçu pour être utilisé avec les Evolutions R185CCS, R185CCSX, R185CCSX + et RAGE4 (vendus séparément). Notre lame peut couper du bois, de l'acier doux, de l'aluminium, du bois avec des clous intégrés, du plastique et plus encore.

  1. Diamètre: 7-1 / 4 pouces
  1. Vitesse maximale: 5000 tr / min
  1. Arbor: 25/32 pouces
  1. Kerf: 0,066 pouce
  1. Dents: 20

Spécifications


Matériau de la lame

Carbure


Matériau de la pointe

Carbure


Fini

Usage général


Appareils recommandés

Multiple


Diamètre de la lame

7-1/4

Dimensions

Hauteur assemblé (en pouces)
7.25
Hauteur de l’emballage (en pouces)
8
Largeur assemblée (en pouces)
7.25
Largeur de l’emballage (en pouces)
8
Poids assemblé (en livres)
1
Poids de l’emballage (en livres)
2
Profondeur assemblé (en pouces)
1
Profondeur de l’emballage (en pouces)
2

Détails

Appareils recommandés
Multiple
Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Universel
Diamètre de la lame
7-1/4
Fini
Usage général
Idéalement utilisé avec
Scies circulaires
Matériau de la lame
Carbure
Matériau de la pointe
Carbure
Nombre de pièces dans l'ensemble
1
Pays d'origine
JP-Japan
Taille de larbre (en po)
0.78
Type d'accessoire pour outils à moteur
Lames pour scies circulaires, Lames pour tronçonneuse
Utilisation
Tout usage
Épaisseur de la lame (en po)
0.067

Garanties et certifications

Pour de plus amples informations, veuillez contacter notre service à la clientèle au 1-800-628-0525
7-1 / 4 pouces. Lame de scie circulaire et à tronçonner multi-matériauxEvolution Power Tools 7-1 / 4 pouces. Lame de scie circulaire et à tronçonner multi-matériauxL'évolution RAGEBLADE est une lame multi-matériaux à pointe de carbure de tungstène de 7-1 / 4 po conçue pour les scies circulaires et à tronçonner. Parfait pour avoir sur le chantier et vous permet d'accomplir le travail plus rapidement sans avoir à changer de lame. Conçu pour être utilisé avec les Evolutions R185CCS, R185CCSX, R185CCSX + et RAGE4 (vendus séparément). Notre lame peut couper du bois, de l'acier doux, de l'aluminium, du bois avec des clous intégrés, du plastique et plus encore.
Evolution Power Tools
1001203826
CAD57.52024-03-01
Home Depot Canada
7-1 / 4 pouces. Lame de scie circulaire et à tronçonner multi-matériaux est évalué 4.0 de 5 de 20.
  • y_2024, m_2, d_29, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_17
  • loc_fr_CA, sid_1001203826, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 73ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Love this blade Why would you buy a regular wood only blade? This cuts everything
Date de publication: 2016-08-02
Rated 4 de 5 de par The blade is priced right for the quality--however, keep in mind you'll end up having to spend an... The blade is priced right for the quality--however, keep in mind you'll end up having to spend another $7-$10 for the ring insert to make this blade actually fit the saw. The one we purchased was too thick and my husband had to grind it down to make it fit. What has happened to quality control and pride in workmanship! The blade should fit without having to purchase another part.
Date de publication: 2018-11-30
Rated 2 de 5 de par I was very happy when I picked this saw up. It did a couple of cuts the day I got it and I have m... I was very happy when I picked this saw up. It did a couple of cuts the day I got it and I have made about 15 cuts in the past few months. I was really happy with the saw until today. Since I've had it I made 3 inch pipe cuts, flat bar and angle iron all 1/8 inch thick. Saw worked fine until today. I was cutting 1/8 inch flat bar 4 inch cut. The blade cut about 1/2 way through and then it got extremely hot and it stopped cutting. I tried to cut metal that I've cut before with no luck at all. Blade is dull. I took my time making cuts and the blade should have lasted longer. Be careful with it if it stops cutting. If you push hard to cut through the metal the blade will start to walk to the left. Not good. Needs a better blade or cooling system. I liked the saw because it was small and I could store it just about anywhere for the most part. im going to try another blade that cuts just metal. I hope it last longer then this blade.
Date de publication: 2017-10-18
Rated 3 de 5 de par The Evolution blade has a larger hole than most blades causing it to fit the evolution saw only -... The Evolution blade has a larger hole than most blades causing it to fit the evolution saw only - poor decision. We used the blade to cut thru roof (tar paper, wood and some shingles) and it ruined blade. Not happy with the cost and it's ability to cut thru various material and problem with not being able to use on all saws. Surprised Home Depot let a company come in and sell product that limits our ability at a project because they design it to only work on their saw and we cannot use other blades on saw.
Date de publication: 2019-10-16
Rated 5 de 5 de par Works very well for any job Cuts rebar and angle steel like butter. Only used for 2 months and do not know the long term performance.
Date de publication: 2016-06-29
Rated 4 de 5 de par I use this saw to cut steel tubing. Works well. The motor did burn out as the saw entered its 3... I use this saw to cut steel tubing. Works well. The motor did burn out as the saw entered its 3rd year of use. I called the service center and they are sending me information to return it for repairs under warranty.
Date de publication: 2017-05-26
Rated 1 de 5 de par I accidentally posted the below review in the 10-inch blade section, but it was meant for the 7-1... I accidentally posted the below review in the 10-inch blade section, but it was meant for the 7-1/4 inch blade. Does not fit on my RIDGID 18-Volt GEN5X Cordless 7-1/4 in. Circular Saw. The center mounting hole in the blade seems to be too big. Am I missing something, an adapter, or steps/process?
Date de publication: 2018-04-10
Rated 5 de 5 de par These are great blades. I wish there was a rubber pad available for my rage 4 clamp so I can hold my tubing edge up without the occasional slip. This blade doesn’t last very long when I cut tubing on the flat side. It doesn’t seem to be a problem for the 14” saws but the 7” can’t get through it.
Date de publication: 2021-08-13
  • y_2024, m_2, d_29, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_17
  • loc_fr_CA, sid_1001203826, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 51ms
  • REVIEWS, PRODUCT

Will this cut stainless steel?

I want to shorten a stainless steel work table. Will this blade do the trick?
Posée par: FJ
This blade will cut the stainless steel, but you may not like the finished product. They make a blade for stainless steel, I forgot the name of it but it is yellow. I used the steel cutting blade to cut aluminum, after about 5 cuts the teeth had aluminum stuck to them, and cutting steel with the blade for aluminum the blade doesn't hold up very long maybe 5 cuts. My advise is to get the blade for the material to be cut, you'll be much happier. These blades can not be sharpened.
Répondue par: THM
Date de publication: 2023-05-03

Wiil this fit circular saw arbor 5/8 in, if not this replacement blade come with the bushing ?

Example: I have looked at the manual and can't figure out what I did wrong.
Posée par: L33
I'm afraid that this only accepts 20mm arbors and this this only comes with the blade.
Répondue par: Evolution Product Pro
Date de publication: 2023-05-04

Will the "TCT-20CS" for the circular saw work with the "Mitre Saw"? The blade that came with the ...

Will the "TCT-20CS" for the circular saw work with the "Mitre Saw"? The blade that came with the mitre saw says "TCT-20MS".
Posée par: billxx
To answer my own question, this blade will work with the mitre saw, just that it will need to be turn around to work. (the painted side faced inward)
Répondue par: billxx
Date de publication: 2019-12-08
  • y_2024, m_2, d_29, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_fr_CA, sid_1001203826, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT