Menu de navigation
Annuler
Livraison express en 3 heures à partir de 9,97 $*  En savoir plus
Evolution Power Tools Scie à onglets multi-matériaux combinée et coulissante de 10 pouces TCT 3-DB

Evolution Power Tools Scie à onglets multi-matériaux combinée et coulissante de 10 pouces TCT 3-DB

Modèle nº RAGE3DB|Nº UGS 1001203836

Aperçu

Modèle # RAGE3DB Internet # 1001203836

La scie à onglets coulissante à double biseau à usages multiples 10 po, TCT, RAGE 3-DB est capable de couper l'acier, l'aluminium, le bois clouté et le plastique avec une seule lame. Avec son double biseau, la nécessité de réajuster la pièce est considérablement réduite. Le RAGE 3-DB comprend une glissière de 125/8 po pour les coupes à angles longs, une grande base pour une stabilité de coupe supplémentaire et un guidage laser pour une précision optimale.

  1. Guide extensible pour les longues pièces de travail
  1. La lame multifonction de 10 po (RAGE255BLADE) produit jusqu'à 750 coupes par lame dans une section de boîte en acier doux de 2 pouces
  1. Base extra grande pour la stabilité de coupe
  1. Aucun liquide de refroidissement requis et presque qu'aucune étincelle
  1. Axe de lame de 1 po

Spécifications

Dimensions

Hauteur assemblé (en pouces)
25
Hauteur de l’emballage (en pouces)
20
Largeur assemblée (en pouces)
24
Largeur de l’emballage (en pouces)
24
Poids assemblé (en livres)
46.5
Poids de l’emballage (en livres)
55
Profondeur assemblé (en pouces)
33
Profondeur de l’emballage (en pouces)
32

Détails

Accessoires compris
Guide de coupe au laser, Lames
Ampères-heures de la batterie
1
Ampérage
15
Caractéristiques de la scie
Guide de coupe au laser
De batterie inclus
Non
Diamètre de la lame
10
Guide de coupe au laser
Largeur de coupe (en pouces)
8.25
Matériau utilisable
Plastique, Acier, Bois, Aluminium
Nombre de piles comprises
0
Nombre de vitesse
1
Pays d'origine
CN-China
Portatif ou fixe
Stationnaire
Sans fil/avec fil
Avec fil
Tension (en volts)
120
Type d'outil à moteur
Scies à onglets
Type de pile, de batterie ou dalimentation
Raccordement fixe
Vitesse variable
Non

Garanties et certifications

Limitée à 3 ans
Scie à onglets multi-matériaux combinée et coulissante de 10 pouces TCT 3-DBEvolution Power Tools Scie à onglets multi-matériaux combinée et coulissante de 10 pouces TCT 3-DBLa scie à onglets coulissante à double biseau à usages multiples 10 po, TCT, RAGE 3-DB est capable de couper l'acier, l'aluminium, le bois clouté et le plastique avec une seule lame. Avec son double biseau, la nécessité de réajuster la pièce est considérablement réduite. Le RAGE 3-DB comprend une glissière de 125/8 po pour les coupes à angles longs, une grande base pour une stabilité de coupe supplémentaire et un guidage laser pour une précision optimale.
Evolution Power Tools
1001203836
CAD5672022-05-20
Home Depot Canada
Scie à onglets multi-matériaux combinée et coulissante de 10 pouces TCT 3-DB est évalué 3.6 de 5 de 25.
  • y_2022, m_5, d_19, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_fr_CA, sid_1001203836, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 88ms
  • REVIEWS, PRODUCT
Rated 2 de 5 de par I was starting a House project after many years of not doing woodworking. I did my research and t... I was starting a House project after many years of not doing woodworking. I did my research and the value was great. The saw works as expected. The dust collection sucks, but I grew up no minding that much. After looking at what other saws do; this really sucks, big time. But I kept going. I am doing now fine detailed work, and the blade sucks. So I researched and I wanted a Freud blade, because their saw blades are fantastic. Guess what the arbor is 1 inch! You simply cannot find a good quality 10 inch blade for 1" arbor, they are all 3/8. Don't buy this piece of junk, save money and but a better saw. If you buy it, you'll be stuck with sawdust in your lungs and a bad evolution blade.
Date de publication: 2019-11-24
Rated 5 de 5 de par Great Great
Date de publication: 2019-07-23
Rated 5 de 5 de par Love it great saw need to have earplugs ... Love it great saw need to have earplugs
Date de publication: 2019-07-03
Rated 4 de 5 de par For starters the price the capabilities of this saw is pretty nice. I bought it only to cut mild ... For starters the price the capabilities of this saw is pretty nice. I bought it only to cut mild steel. I was glad I bought the steel specific blade, the blade that came with this saw went dull six cuts in cutting 14ga tubing. The laser was awesome until the chips from the metal blade pitted the plastic cover (second day). I really wish the knobs were metal instead of the flimsy plastic that's used. I see them breaking over time. Positives are the motor feels good, sliding action and mitering action is smooth, and I have a mag drill from this same brand that I've used quit a bit and love it. So I hope this lasts as well.
Date de publication: 2019-06-27
Rated 4 de 5 de par Awesome, only way to make it better is to make... Awesome, only way to make it better is to make it cut 4” square tubing
Date de publication: 2019-03-20
Rated 2 de 5 de par It was a Christmas gift to my son. When he... It was a Christmas gift to my son. When he opened it, it was badly out of alignment. The saw blade would hit the center slot when fully extended. The alignment adjustments could not fix the problem. Fortunately, he did not use the saw, and is in the process of exchanging it.
Date de publication: 2019-01-08
Rated 3 de 5 de par Plastic Bed Melts This is not very good for cutting metal; as soon as your blade gets a bit dull and there is friction the plastic bed will melt to the metal. I have put some very expensive blades on it and this is not the way to go if you want to cut steel. The EVO skill saw is a better buy and the blades are cheaper.
Date de publication: 2018-11-10
Rated 2 de 5 de par Box was beat up. Saw looked to have been a... Box was beat up. Saw looked to have been a return due to the fact that it was completely assembled. Extension rails were missing. But hey it worked.
Date de publication: 2018-11-08
  • y_2022, m_5, d_19, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_fr_CA, sid_1001203836, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 47ms
  • REVIEWS, PRODUCT

Has the company considered upgrading this saw to accommodate a 12" blade to increase the capacity...

Has the company considered upgrading this saw to accommodate a 12" blade to increase the capacity and versatility?
Posée par: Perry
no
Répondue par: DoctorWhy
Date de publication: 2019-11-24

compared to R255SMS

Posée par: Danny
Our double Bevel will allow you to bevel in both directions.
Répondue par: Evolution Product Pro
Date de publication: 2019-10-09

Is the blade that comes with the saw recommended for cutting stainless steel if not do you make one that is?

Posée par: James
It doesn't do the best job and will wear out rather quickly when used for stainless, they do make a stainless steel specific blade.
Répondue par: Trin
Date de publication: 2018-12-21

The video states up to 45 degree bevels. The spec sheet states 55 degree max for bevel cuts. Whic...

The video states up to 45 degree bevels. The spec sheet states 55 degree max for bevel cuts. Which one is it?
Posée par: Pipeliner
Both are correct. 55 degrees is the limit on the table in both directions (yaw) and 45 degrees is the adjustment for the saw head itself (roll). I am not sure of the actual vocabulary for these adjustments but I hope this somehow explains.
Répondue par: Trin
Date de publication: 2018-12-21

Where is this miter saw built at and where is it made at.?

Where is this miter saw built at and where is it made at.?
Posée par: Jim
It does not matter where it’s made. It is tuff and does its job
Répondue par: Guitarkid666
Date de publication: 2018-09-05

Why the big price difference between the single and double bevel saws?

Posée par: Chris
Double bevel, fence slide outs, and laser guide
Répondue par: Scott
Date de publication: 2018-08-30

Hi. Is this machine good for running all day like a heavy duty or it is just for a small jobs. Thank you

Posée par: RicardoR
Small jobs. Not industrial.
Répondue par: Vince
Date de publication: 2019-06-18

Hi. this model works in 110V or 220V? thank you

Hi. this model works in 110V or 220V? thank you
Posée par: Paco
110 volts
Répondue par: Vince
Date de publication: 2018-12-21
  • y_2022, m_5, d_19, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_fr_CA, sid_1001203836, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 137ms
  • QUESTIONS, PRODUCT