Magasinez les aubaines du Vendredi fou que vous ne voudrez pas manquer!  Magasiner les articles de l’événement

FLIR Systems Pince ampèremétrique de 600 Ampères avec fonction Bluetooth

Modèle nº CM83|Nº UGS 1000846519

Aperçu

Modèle # CM83 Internet # 1000846519

De conception solide pour une utilisation intensive, la pince ampèremétrique CM83 de FLIR assure sécurité et polyvalence sans compromettre les hautes performances et l'innovation nécessaires aux défis de demain. Utilisez la CM83 pour chaque tâche, celle-ci comporte des fonctions avancées telles que la mesure de précision en valeur efficace vraie, un mode Filtre VFD, un mode qualité de l'alimentation (THD (distorsion harmonique totale), mesure des harmoniques, watts, rotation de phase), mesure de courant et de tension AC/DC, résistance, capacité, fréquence, test de diode, et test de continuité. Utilisez la fonction Maintien de la valeur de crête (Peak Hold) rapide pour enregistrer les variations de courant et transitoires.

  1. Le mode VFD offre une précision supérieure permettant le travail sur des équipements contrôlés par VFD
  1. Rendement énergétique et mesure des harmoniques avancés pour l'analyse du niveau de performances des systèmes
  1. Les lampes puissantes, en plus de vous assister lors de la prise de mesure, sont suffisamment puissantes pour faire office de lampes de travail principales
  1. FLIR Tools Mobile permet de connecter la CM83 FLIR à votre smartphone compatible et de transférer les données via Bluetooth
  1. La technologie METERLiNK transfère par connexion sans fil toutes les mesures électriques sur l'image infrarouge des caméras thermiques FLIR

Spécifications

Dimensions

Hauteur assemblé (en pouces)
11.75
Hauteur de l’emballage (en pouces)
11.75
Largeur assemblée (en pouces)
5.50
Largeur de l’emballage (en pouces)
4.25
Poids assemblé (en livres)
1.29
Poids de l’emballage (en livres)
1.5
Profondeur assemblé (en pouces)
4.25
Profondeur de l’emballage (en pouces)
5.5

Détails

Article individuel, Ensemble
Article individuel
Courant alternatif maximal (en A)
600
Courant continu maximal (en A)
600
Fonction de testeur
Tension électrique
Pays d'origine
TW-Taiwan
Type de produit
Électropince
Type de testeur
Électropinces

Garanties et certifications

Garantie limitée
Pince ampèremétrique de 600 Ampères avec fonction BluetoothFLIR Systems Pince ampèremétrique de 600 Ampères avec fonction BluetoothDe conception solide pour une utilisation intensive, la pince ampèremétrique CM83 de FLIR assure sécurité et polyvalence sans compromettre les hautes performances et l'innovation nécessaires aux défis de demain. Utilisez la CM83 pour chaque tâche, celle-ci comporte des fonctions avancées telles que la mesure de précision en valeur efficace vraie, un mode Filtre VFD, un mode qualité de l'alimentation (THD (distorsion harmonique totale), mesure des harmoniques, watts, rotation de phase), mesure de courant et de tension AC/DC, résistance, capacité, fréquence, test de diode, et test de continuité. Utilisez la fonction Maintien de la valeur de crête (Peak Hold) rapide pour enregistrer les variations de courant et transitoires.
FLIR Systems
1000846519
CAD6282022-11-28
Home Depot Canada
Pince ampèremétrique de 600 Ampères avec fonction Bluetooth est évalué 4.6 de 5 de 14.
  • y_2022, m_11, d_27, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_fr_CA, sid_1000846519, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 83ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Great meter [This review was collected as part of a promotion.] FLIR is a big brand name and once again they don't disappoint. The meter is designed for professional use, built rugged and with plenty of functions. For DIY you can get a much cheaper clamp meter that will likely still meet your needs. One great feature of this meter is the Bluetooth connectivity. The Android App that allows the meter readings to wirelessly appear in the App via Bluetooth. It eliminates wires and allows the meter to view the data from a safe distance.
Date de publication: 2015-04-08
Rated 5 de 5 de par A very rugged industrial-grade Power Clamp Meter. [This review was collected as part of a promotion.] FLIR has brought up ultra modern Electrical and Electronic testing and troubleshooting equipments to the market. The CM83 Power Clamp Meter is one of that. It is Engineered with versatility: It is an industrial-grade Power Clamp Meter engineered with advanced power analysis and VFD filtering functions required by electrical troubleshooters. No need to select AC or DC Mode for quick tests. One of the best features is that it can measure hard and soft start-up inrush current spikes while equipment is ramping up. Another feature is that with the METERLiNK Compatibility, it can send Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation. With the new technology, it can be connected Android devices for remote diagnostics in hard-to-reach or hazardous areas with Bluetooth Connectivity, and can upload data without the need for special cords. It is very rugged & shock-resistant. The double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and many years of service.
Date de publication: 2015-04-06
Rated 5 de 5 de par Vary stable reader [This review was collected as part of a promotion.] I got this about 3 months ago and used it for a variety of tasks from circuit testing , fuse boxes , power lines cords and polarity testing . This unit is packed with advanced features that any one can use who has basic experience wanting to expand learning The body is vary durable good for use in total dark or daylight when doing readings the unit does not drift unlike less expensive models the volts reading shifts up or down or both but Flir made a wonderful multitask diagnostic Multimeter get one its well worth it
Date de publication: 2015-10-10
Rated 1 de 5 de par Not sure about this product's build quality I was looking for a new meter (still have my old Fluke) when I came across this Flir. I immediately liked the feel and rubberized exoskeleton. I was happy with it's operation at first and then weird things started to happen. I was in the process of testing a DC circuit (auto mode) when all of the sudden the screen started flashing between modes; even the battery bar icon started going up and down. Switched to off (removed meter from low voltage DC circuit) and it was still not operating. I could flick the meters body with my finger and get the screen to flash between modes and get the battery bar icon to move up and down. Removed and reinstalled batteries. Seems to be working ok now; however one quirk still remains. If a snap the clamp together (far removed from any electrical source) or flick the clamp with my finger the current warning light will flicker on and off. Oh, one other thing. As reported by some online reviews: the Bluetooth application just doesn't want to connect. This unit has never been dropped or banged around. So at this point I am unsure of the products quality. I work for a large institution and need to feel secure with regards to my test equipment. I cannot recommend this product at this point in time.
Date de publication: 2018-03-15
Rated 5 de 5 de par Best in my Tool Belt [This review was collected as part of a promotion.] This meter never ceases to come up with ways to amaze me. First off, if you are not familiar with clamp on meters & are looking for a good model ... look no further. Clamp on meters allow you to "meter" the power without any disconnect. It safely clamps around the wire & gauges what's going on with that circuit. The large, easy to read screen gives you the necessary information at a glance. In addition top the clamp on feature, it also accepts leads. The built-in LED lighting allows you a way to see what's going on in the electrical box without the need for holding a flashlight with you second hand. Battery installation is easy. Unit is also compatible with Bluetooth MeterLink, a free app that can be downloaded allowing the user to monitor the meter readings at a distance. Now you can be at the circuit and see what's going on with your meter at the motor or other electrical device being tested.
Date de publication: 2015-06-10
Rated 5 de 5 de par Clamp meter that I am certain will last longer that my last one. [This review was collected as part of a promotion.] I am particularly in love with the bluetooth feature on this clamp meter. It is so helpful being able to use the app on my phone to view and record measurements while I am trying to multitask at the same time. Anything that helps me get the job done faster is always a bonus. I also expect this one to outlast my old one because this one is so well protected. Sometimes I am not that as careful with my tools as I should be, and so far over the months I have used this, it has stood up to several drops. One time it slid off a platform I was working on, and all it did was scuff the exterior slightly. I am very pleased with how sturdy it is, and I am sure to get many more years of service out of it. I love the easy to read display on this meter as well. Kinda helps when your eyes aren't the best.
Date de publication: 2015-07-15
Rated 5 de 5 de par Industrial strength and exceptional features [This review was collected as part of a promotion.] This meter has some exceptional features not found in lesser meters. The meter comes with: * CD with documentation * Printed User's manual * Test leads - nice flexible silicon with gold-plated tips. * 6 AAA Batteries It has a nice large display with bright, even backlight. The controls are placed so it can be operated one-handed if you have a larger hand since the total width is almost 4". The special features that set it apart from other clamp meters are: * It has a very bright work light for measurements in poorly lighted areas. * The non-contact voltage detector light turns on when within about 12" of an active circuit. * It measures both AC and DC current. Most clamp meters only measure AC current. * It measures THD for both AC voltage and current, as well as individual harmonics out to H25 * It measures power (watts) and power factor. * It measures maximum inrush current for the first 100ms after current flow begins * It measures frequency for both AC voltage and current. * Has an AC+DC mode for both voltage and current. * Has a VFD mode (low pass filter) for AC voltage and current measurements. * Records Min/Max/Average readings * Peak mode records and holds maximum readings * Bluetooth connectivity to IOS and Android apps that echo the measurement being made. There are some operational considerations to be aware of. The probes do not measure current, only the clamp does. In order to measure power and power factor both the probes and clamp must be attached to measure voltage and current simultaneously. When measuring distortion, frequency, or inrush current using the clamp, the current must be at least 10 amps. Distortion is only measured between 45 and 65Hz. When measuring power, the current must be at least 5 amps. Battery life is rated at 50 hours. The meter has auto-off and turns off after 30 minutes. The auto-off can be disabled.
Date de publication: 2015-04-09
Rated 5 de 5 de par CM83 Clamp Meter [This review was collected as part of a promotion.] This professional grade Flir CM83 Clamp Meter performs as described. It has blue tooth capability to connect to your Android smart phone or tablet for safe remote viewing. Fast, accurate readings, with a large back lit, easy to read digital display. Bright work light, and durable case. Batteries are included. Very fast shipping.
Date de publication: 2015-04-18
  • y_2022, m_11, d_27, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_fr_CA, sid_1000846519, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 51ms
  • REVIEWS, PRODUCT

Come with calibration sticker or certificate?

Posée par: bubba
No, it does not come with calibration sticker and/or certificate.
Répondue par: Communityanswer
Date de publication: 2019-04-16

will it measure tempature

Posée par: Matthew
No.
Répondue par: SebastianUSA
Date de publication: 2018-04-27
  • y_2022, m_11, d_27, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_fr_CA, sid_1000846519, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 71ms
  • QUESTIONS, PRODUCT