L’événement On se met à l’oeuvre est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # 6296 Internet # 1000788972

Procurez-vous la puissance d'une grosse génératrice pour alimenter encore plus d'éléments avec notre trousse de 50 A pendant une panne de courant. La trousse de 50 A protège 12 circuits et accepte les disjoncteurs interchangeables pour prendre en charge jusqu'à 16 circuits (amorçage d'arc et fuite de terre). À utiliser avec toutes les génératrices portatives équipées de prises L1414. Procurez-vous la puissance d'une grosse génératrice pour alimenter encore plus d'éléments avec notre trousse de 50 A pendant une panne de courant.

  1. Protège jusqu'à 12 circuits
  1. Accepte les disjoncteurs interchangeables pour prendre en charge jusqu'à 16 circuits (y compris amorçage d'arc et fuite de terre)
  1. Montez-le comme panneau secondaire dans votre maison ou votre garage
  1. Vous trouverez tout ce dont vous avez besoin dans ce boîtier
  1. Compatible avec toutes les génératrices portatives équipées d'une prise 14 - 50 A.
  1. Included with Kit are manual transfer switch, 10 ft. Cord, 50 Amp power inlet box, installation manual, wire harness, conduit, fittings, wire connectors and warranty registration card

Spécifications

Dimensions

Hauteur assemblé (en pouces)
11.50
Hauteur de l’emballage (en pouces)
11.5
Largeur assemblée (en pouces)
14.30
Largeur de l’emballage (en pouces)
14.3
Poids assemblé (en livres)
11
Poids de l’emballage (en livres)
11
Profondeur assemblé (en pouces)
3.30
Profondeur de l’emballage (en pouces)
3.3

Détails

Automatique ou manuel
Manuel
Intensité du courant électrique (en ampères)
50 ampères
Nombre de phases
1
Pays d'origine
US-United States

Garanties et certifications

Garantie limitée de 2 ans
Trousse de commutateur/converteur de génératrice de 50 A pour 12 à 16 circuits, réservé à un usage intérieurGenerac Trousse de commutateur/converteur de génératrice de 50 A pour 12 à 16 circuits, réservé à un usage intérieurProcurez-vous la puissance d'une grosse génératrice pour alimenter encore plus d'éléments avec notre trousse de 50 A pendant une panne de courant. La trousse de 50 A protège 12 circuits et accepte les disjoncteurs interchangeables pour prendre en charge jusqu'à 16 circuits (amorçage d'arc et fuite de terre). À utiliser avec toutes les génératrices portatives équipées de prises L1414. Procurez-vous la puissance d'une grosse génératrice pour alimenter encore plus d'éléments avec notre trousse de 50 A pendant une panne de courant.
Generac
1000788972
CAD8592024-05-22
Home Depot Canada
Trousse de commutateur/converteur de génératrice de 50 A pour 12 à 16 circuits, réservé à un usage intérieur est évalué 5.0 de 5 de 4.
  • y_2024, m_5, d_22, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_fr_CA, sid_1000788972, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 99ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Color coded and numbered for easy installation You will first need to decide which circuits you are going to use on your transfer switch. I opted to remove the supplied 50amp breaker and provided my own tandem breakers in its place. I lost one 50 amp 240v circuit, but gained four 20amp 120v circuits. Living in the country, we are all electric, so I had to choose carefully. The panel itself will support up to 100Amps from the existing load center (50 amps from the generator). With this in mind, I calculated each load, and then moved 12 circuits to the new panel. I did not move my central air/heat, nor the electric range, nor some other non essential circuits. I previously purchased a portable AC unit and a 1,500W wall heater, allowing me to heat/cool areas of our home without needing 125 amps for the central air . All 12 circuits, if used simultaneously, at full load, would exceed the 50Amp my generator is able to provide. But by adding them to this panel, it gives me the flexibility to bring online other circuits whilst turning others off. For example, I might want to heat the water tank, and to do this I'll refrain from using the microwave or other power hungry circuit at the same time. The watt meters on the panel are perfect for measuring load, and super easy for helping you make decisions on which circuits to use. Installation was straightforward. Whilst it can be surface mounted, the transfer panel will fit inside standard 16" centered studs. I chose to flush mount mine, which increased the amount of work somewhat. Moving circuits could not have been easier. Remove a circuit from its old breaker, add the provided jumper wire and route it to the new breaker on the new panel. All the wires are numbered with the circuit, not a sticker on the wire, but actually printed continuously along the length of the wire. One thing you need to supply is a 100amp breaker for your existing panel. I had a rather old existing breaker panel, and had to special order the breaker, so plan ahead. You'll need to provide 6/3 (+ground) wire that runs from the panel to the provided generator inlet, and any conduit to ensure your installation meets code. The inlet box is for exterior use. Carefully plan where you want this to be. Ideally, you don't want it to be in an area were the generator fumes could enter the house (dryer ducts, eve vents, etc). You want it to be easily accessible, so you can get the generator to the inlet in any kind of weather. The only downside I found was the supplied transfer breaker panel does not have a door, so the breakers are visible at all times. This is somewhat of an industrial look that may not be appropriate depending on where you want to locate the panel. The panel labels are also a little 'homemade looking', as though someone ran a basic template through a regular home printer. Color coded inputs on the inlet, numbered jumper wires, and a concise yet helpful manual made installation as simple as one could hope for. Having a backup power source is empowering. No more will I worry if the power goes out during a storm, never knowing if my freezer contents are going to spoil. I know that after the next outage, when my neighbors see I'm the only property for miles with lights on, they will be asking me to help them install their own.
Date de publication: 2012-11-05
Rated 5 de 5 de par Power the big and small loads in an emergency The kit is well packaged and well made. I found the instructions to be thorough yet not excessively or sparingly detailed. General note: Know your limits in electrical wiring! Though the kit is fairly concise, don’t attempt to work outside of your skill level. Check with your local permit office prior to installation as this may require a permit. I highly recommend that you download, print & thoroughly read the Generac Installation and Operating Instructions prior to purchase. These instructions are available as a free PDF download. Additional materials & tools are needed to complete the installation process. With proper preparation, the installation can be completed in 1 day. Kit can be installed flush or surface mount and accepts a wide variety of popular breaker types allowing for a number of circuit configurations. I find the dual wattmeters to be helpful in controlling your loads, prolonging generator life.
Date de publication: 2012-10-29
Rated 5 de 5 de par The "Mac Daddy" of transfer panels This kit is all you need to get your generator powering the house during a power outtage. It comes with fairly good installation instructions, but I decided to hire a professional to do the install, since I'd have to turn off the main breaker panel for the whole process, and I didn't want to have the freezer and refrigerator without power for more than a few hours. The first contractor I had come out for a quote was a licensed Generac dealer, and upon seeing which panel I had for the install exclaimed, "That thing is the mac daddy of transfer panels!" That's a direct quote, and he wasn't trying to sell me on it, since I wasn't buying it from him. The estimate he gave me was $400 for the entire install. I'm planning on getting a second quote, and getting it installed before this year's tornado season.
Date de publication: 2013-04-08
Rated 5 de 5 de par Generator Transfer Switch Everything needed to complete the project was in the box ready for installation by the electrician. All parts were high quality and I'm ready to covert power in the event of an outage.
Date de publication: 2016-08-03
  • y_2024, m_5, d_22, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_fr_CA, sid_1000788972, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 27ms
  • REVIEWS, PRODUCT

Is the transfer switch automatic on/off or manualy ?

Posée par: Aurelio
This is a manually-operated transfer device.
Répondue par: Grogan14
Date de publication: 2018-04-26

Can this be used with two apartments (separate utility hook-ups)?

Posée par: Narawntapu
Generac’s generators are designed and manufactured to back up only one utility service. If both apartments utilize two separate utility hook-ups, each would require their own generator. Any damage incurred from a configuration attempting to utilize one generator to provide back-up power to two separate utility hook-ups will not be covered under the product’s warranty, as such configurations can be dangerous and are not recommended by Generac. We recommend contacting a certified dealer for further sizing and compatibility assistance. If you need help finding a dealer in your local area, please contact Generac directly at 888-GENERAC (436-3722).
Répondue par: Generac
Date de publication: 2023-05-03

I have two 200amp panels in my home. Can I use this transfer to supply power to items in both pan...

Posée par: David
The amperage rating of a transfer switch should meet or exceed the amperage rating of your home's main panel(s).
Répondue par: Generac
Date de publication: 2023-05-04

Does it rquire 100 Amp two-pole main breaker in existing load center?

Posée par: John
As specified by the unit's spec sheet, Generac's 50-Amp GenTran Series manual transfer switch, model number 6296, will require having a 100-amp 2-pole main breaker installed in the load center during setup; this should be completed in the field by your chosen installer. If you have any other product-related comments, questions, or concerns, please contact us directly at 888-GENERAC (436-3722).
Répondue par: Generac
Date de publication: 2023-05-03

Can I use a 30amp generater with the Generac 50 AMP transfer switch?

Posée par: Stu
There is no reason you cannot do this, as long as you do not exceed the output of the generator. The 50 AMP kit total breaker rating exceeds 50AMP, you just don't use all the rated output at the same time, with a 30 AMP generator you use even less. The 50 amp kit comes with a cord to hookup to a 50 AMP outlet on your generator. You'll need to remove the 50 AMP plug (at the end that goes in to your generator) and install a 30 AMP plug instead. This kit has a NEMA 14-50 plug that goes in to a generator. Most 30 amp generators have a NEMA L14-30. So you would remove the NEMA 14-50 plug and install a NEMA L14-30 plug. FYI - when looking for a plug, a suffix denotes whether the item is a plug or receptacle. So NEMA L14-30P is a plug, whereas NEMA L14-30R is the receptacle. If you can change a plug, then you can make this work. The important factor here is you are not exceeding the rated design. Using a 50 amp generator on a 30 amp kit is bad, you are not attempting to do this. You could make your own adaptor, but you'd be buying a NEMA L14-30P and a NEMA 14-50R with a water proof housing and some cable. Much cheaper to just buy a NEMA L14-30P and swap the plug out on the supplied cable.
Répondue par: JessicaB
Date de publication: 2023-05-02

Could I use this transfer switch kit to power a food truck with a 6500W generator?

Posée par: Lloyd
To ensure that you are utilizing a transfer switch that not only meets your needs but also local codes, we would recommend working with a certified electrician in your local area. For help locating a certified party near you, contact us directly at 888-GENERAC (436-3722).
Répondue par: Generac
Date de publication: 2023-05-03
  • y_2024, m_5, d_22, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_fr_CA, sid_1000788972, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 70ms
  • QUESTIONS, PRODUCT