Le Vendredi fou du printemps des Pros est en cours. N’attendez pas!  Magasinez maintenant
Choisissez vos options

Aperçu

Modèle # H2DMMHBI7PCC Internet # 1001004670

Les embouts pour clé à choc à entraînement de ½ po Husky sont forgés an alliage d'acier au chrome-molybdène (Cr-Mo) et conçus pour résister aux rigueurs du service sévère automobile et industriel. Les repères de taille sont gravés au laser dans les embouts pour les identifier plus facilement et plus rapidement. Les repères ne s'effaceront jamais. Les embouts pour clé à choc Husky sont conçus pour résister aux couples de serrage élevés et aux forces de choc couramment associés aux outils à choc électriques.

  1. L'ensemble comprend (7) douilles pour embouts à percussion à entraînement de 1/2 pouce : Métrique - 9, 10, 11, 12, 13, 14, 15 mm
  1. Conçue pour être utilisée avec des outils à percussion
  1. La conception industrielle en deux parties permet de retirer et de remplacer facilement l'embout hexagonal s'il est endommagé.
  1. Finition huilée à l'oxyde noir pour une résistance maximale à la corrosion
  1. Trou de goupille à la base de chaque douille permettant d'utiliser une goupille de verrouillage pour une fixation sûre sur les outils d'entraînement.
  1. Les socles de douilles sont forgés en acier allié au chrome-molybdène (Cr-Mo) pour sa solidité sous la pression des chocs et sa résistance à l'usure.
  1. Les entrées chanfreinées permettent une mise en place rapide et facile sur les outils d'entraînement et les fixations.
  1. Les grandes marques de taille estampillées permettent d'identifier facilement la taille de la douille.
  1. Un serrage excessif augmente le risque de dénuder la fixation ou d'endommager le panneton.
  1. Rail de rangement en plastique inclus pour garder toutes les douilles organisées et au même endroit
  1. Conforme ou supérieur aux normes ANSI
  1. Appelez le 1-888-HD-HUSKY pour obtenir un service et une assistance à la clientèle
  1. Garantie à vie sans questions, sans reçu requis

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1.18
Hauteur de l’emballage (en pouces)
1.18
Largeur assemblée (en pouces)
3.94
Largeur de l’emballage (en pouces)
3.94
Poids assemblé (en livres)
0.77
Poids de l’emballage (en livres)
0.77
Profondeur assemblé (en pouces)
13.78
Profondeur de l’emballage (en pouces)
13.78

Détails

Article individuel, Ensemble
Ensemble
Nombre de pièces dans l'ensemble
7
Nombre de pièces dans lensemble
7
Pays d'origine
TW-Taiwan
Taille de la prise (en po)
1/2
Taille de la prise (en po)
1/2
Étalon de mesure
Métrique
Étalon de mesure
Métrique

Garanties et certifications

Garantie à vie : Si jamais votre outil à main Husky tombe en panne, rapportez-le et nous le remplacerons gratuitement. Appelez le 1-888-HD-HUSKY (1-888-434-8759) pour le service et l'assistance.
Clé à chocs à embout hexagonal métrique de 1/2 po. Drive Metric Hex Bit Impact Socket Set with Socket Rail (7-Piece)Husky Clé à chocs à embout hexagonal métrique de 1/2 po. Drive Metric Hex Bit Impact Socket Set with Socket Rail (7-Piece)Les embouts pour clé à choc à entraînement de ½ po Husky sont forgés an alliage d'acier au chrome-molybdène (Cr-Mo) et conçus pour résister aux rigueurs du service sévère automobile et industriel. Les repères de taille sont gravés au laser dans les embouts pour les identifier plus facilement et plus rapidement. Les repères ne s'effaceront jamais. Les embouts pour clé à choc Husky sont conçus pour résister aux couples de serrage élevés et aux forces de choc couramment associés aux outils à choc électriques.
Husky
1001004670
Clé à chocs à embout hexagonal métrique de 1/2 po. Drive Metric Hex Bit Impact Socket Set with Socket Rail (7-Piece) est évalué 4.7 de 5 de 120.
  • y_2024, m_4, d_16, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_36, tr_84
  • loc_fr_CA, sid_1001004670, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 113ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Quality backed by lifetime guarantee This impact socket adapter set has met all my expectations and has been a great addition to my tools. Need to use a socket but don't have an impact wrench? Need to access a tight space or reach into a tight area? Mate one if these up with your drill or impact driver and you're in business. These all hold the respective sockets securely and mount to the impact driver snugly. While not an item i reach for frequently it sure is handy at times and I'm happy with this purchase!
Date de publication: 2022-07-03
Rated 5 de 5 de par High Quality, Great Price! [This review was collected as part of a promotion.] This is a high quality set at a value price! The sockets are made from high quality Chromoly steel (stronger than carbon steel, less brittle than chrome vanadium steel). The smaller bits are S2 steel and the larger bits are Chrome Vanadium steel. They are all printed and stamped with sizes. The printing is really nice because you can see if easily from arms length. The stamping is a great back-up though, in case the printing ever wears off. The bits are all removable via a set screw, so if you snap a bit you can replace it. Lastly, they come on nice organizer rail that can be wall mounted or sits nicely in a drawer. I would definitely recommend these!
Date de publication: 2015-12-12
Rated 5 de 5 de par Portable, fits both cars There is one most important point which is not advertised at all: It's thin-wall on the 3/4 - 16/13 socket. This one fits my both cars, and best of all, I don't need to buy an expensive thin wall socket set. Recommended.
Date de publication: 2020-06-03
Rated 5 de 5 de par Durable and high quality. [This review was collected as part of a promotion.] Have used these impact bits at work for the last week and found them so far to be pretty durable with the daily use I have put them through. Finish is the standard black oxide and will require occasional oiling to keep rust at bay. Retention of the bit portion in the holder seems to be by a set screw but I have not yet tried to see if the bit portion is removable for replacement purposes.
Date de publication: 2015-12-01
Rated 4 de 5 de par Good product, but... I bought this impact socket set to install some suspension parts on my car. They are of great quality and weight. Unfortunately, the side walls of the larger sized (21mm and up) sockets are too thick and wouldn't fit inside a strut tower (for example). I had to make a second run to get another socket (individual) to get the job done. I was thinking about returning it but I might keep the set as it is good to have. Would recommend.
Date de publication: 2017-05-01
Rated 5 de 5 de par Great Sockets! [This review was collected as part of a promotion.] Ok so these are basically the same as the SAE hex sockets I reviewed earlier, and they are another fine product. They are a well made set of impact hex bits, guaranteed forever! The kit includes a carrier for easy storage. They are of high quality and should last me the rest of my life. They have high contrast etched markings that are easy to see, a great feature! I have used these with air impact tools as well as battery powered impact tools and they performed flawlessly. Great tools at a great price!
Date de publication: 2016-08-29
Rated 4 de 5 de par Some Might Call It a 29-pc Set ! [This review was collected as part of a promotion.] SKU #1001 381 275 Made in Taiwan. Lifetime replacement guarantee. Set weighs in at 1004 gms. CR-MO chromoly steel [a family of SAE 41xx steel grades containing chromium and molybdenum having excellent strength-to-weight ratio and considerably stronger and harder than standard 1020 steel; the chromium content is not in great enough quantities to provide the corrosion resistance found in stainless steel]. 29 pieces? Well, each of the seven "sockets" are actually composed of three pieces. There are seven individual 41 mm long "bit holders"; at one end are the 1/2" drive sockets and at the other an 11 mm hex sockets. Then there are seven male bits ... 9, 10, 11, 12, 13, 14, and 15 mm on the "action end" and all 11 mm on the other male end; these 11 mm male ends insert into bit holders and are held there by an set screw requiring a 1/8" hex wrench. Then there's the 10" long plastic bit storage rack [mounting holes are 207 mm c-c] and the seven individual 'keepers' that can be slid on and off it. It is possible to "over-seat" the male bits into the bit holders; you'll know this if the set screw stands proud. Since this is the larger bit set, being "impact" bits is a no-brainer.
Date de publication: 2015-11-23
Rated 5 de 5 de par Sturdy socket set [This review was collected as part of a promotion.] This metric hex socket set is a great addition to any tool set. This set starts with size nine, and goes up to size fifteen. The sizes are both printed and engraved on the side of the socket. The sturdy build on these will provide years of use with your impact driver. The included rail is a bonus which helps to keep them organized in your toolbox. I've personally had great luck with Husky tools, and if something does go wrong, Home Depot always stands behind them.
Date de publication: 2016-09-07
  • y_2024, m_4, d_16, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_36, tr_84
  • loc_fr_CA, sid_1001004670, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

i have a husky torque wrench that failed can i bring it back

it is a husky 1/2 in torque wrench ...model 39104
Posée par: jj
I can say for sure, but for long as I can remember, HD - Husky tools are Guaranteed forever. That being said, I have had to take a few items to a HD with a tool rental/service center to get a replacement.
Répondue par: Retired297
Date de publication: 2023-05-04

can you get insert replacement first my 1/2" Allen broke now the 3/8 allen

Posée par: hugo
Hugo, Please give our customer service team a call at 1-888-HD-HUSKY (1-888-434-8759) option 2, and we will work with you to replace your damaged items.
Répondue par: Husky Mechanics Tools
Date de publication: 2023-05-07

The hex bit can be removed if damaged. What is the part number for each hex bit (9mm-15mm)?

The hex bit can be removed if damaged. What is the part number for each hex bit (9mm-15mm)?
Posée par: BobTheBuilder
Bien recitede buen protusdo
Répondue par: Blacky
Date de publication: 2022-03-03

I need the bit to fit into a small area. What is the length of the items? Thanks.

I need the bit to fit into a small area. What is the length of the items? Thanks.
Posée par: Khebre
Hey Khebre, The Husky 1/2 in. drive Impact Hex Bit Sockets are roughly 2.2 in. tall. Thanks!
Répondue par: Husky Mechanics Tools
Date de publication: 2023-05-06

I bought a Torque Wrench 1/2 inch and want to buy sockets too. I measured the hex nut on the wheels which are approx 0.75 inch which is roughly 19mm. I could not find any socket which says 19mm along with 1/2 inch socket drive. Am I missing something?

Posée par: Vaan87
Vaan87, you would be looking for a 1/2 inch Drive 3/4 inch, or 19mm Socket. IF you are changing your tires i would recommend using a deep well socket to give better clearance on the cars bumpers. . https://www.homedepot.ca/product/husky-1-2-inch-drive-3-4-inch-12-point-sae-deep-socket/1000775525 https://www.homedepot.ca/product/husky-1-2-inch-drive-19-mm-12-point-metric-deep-socket/1000774392
Répondue par: Husky Mechanics Tools
Date de publication: 2021-04-07

What is the outer diameter, at the fastener end, of the 12mm socket?

Posée par: thythy
Thythy, the OD of the 12 mm socket is 0.665 inches (16.9mm)
Répondue par: Husky Mechanics Tools
Date de publication: 2021-06-22

Will the 10 mm and 13 mm socket fit inside a shallow unsitrut? The inner dimensions is 7/8 inch or 22 MM

Posée par: M sh
Msh, The outer diameter of the 10mm socket is 0.59" (15mm) and the outer diameter of the 13mm is 0.74" (19mm). Both of these sockets should work on your 7/8" unistrut.
Répondue par: Husky Mechanics Tools
Date de publication: 2022-04-11

How deep are these sockets? could they reach 90mm

Posée par: weasrgf
Hello, the total length of these sockets is 82mm, so without an extension they would not reach 90mm.
Répondue par: Husky Mechanics Tools
Date de publication: 2024-01-16
  • y_2024, m_4, d_17, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_fr_CA, sid_1001004670, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT