Nous nous occupons de tous vos retours des Fêtes.  En savoir plus

Aperçu

Modèle # G7200S-CA Internet # 1000846226

Le banc de travail 72 po de Husky propose une surface de travail parfaite pour votre garage et tous les endroits où vous souhaitez réaliser des projets créatifs, tant à la maison quau bureau. Ses généreuses dimensions vous offrent une surface de travail lisse pour vos projets. La hauteur réglable de 28,3 po à 42,1 po par incrément de 1 po, assure votre confort, que vous travailliez près du sol, en position assise ou debout. En plus de bien supporter le poids, les pieds en acier robuste fournissent une base solide qui ne glisse pas, ne bouge pas et ne vacille pas pendant que vous êtes à luvre.

  1. Le plateau en bois massif de 1,25 pouce d'épaisseur offre une surface de travail plane pour diverses tâches
  1. Pieds réglables pour compenser les inégalités du sol
  1. Vous permet de travailler en position assise ou debout
  1. Comprend tout le matériel nécessaire à l'assemblage
  1. Acier robuste, revêtu de poudre pour une rigidité et une capacité de charge optimales
  1. À pleine hauteur, il est suffisamment haut pour que les meubles de base Husky vendus séparément puissent être placés en dessous, formant ainsi un système cohérent
  1. Mesure 72 pouces L x 24 pouces P x 42,1 pouces H (hauteur réglable)
  1. Pèse 102,8 livres
  1. Garantie limitée à vie sur le cadre ; garantie limitée d'un an sur le dessus en bois. <lt/>a href="https://www.homedepot.com/c/huskywarranty" target="_blank" style="color:#F96302 ;"<gt/>Cliquez ici pour plus d'informations.<lt/>/a<gt/>
  1. Appelez le 1-888-HD-Husky pour le service à la clientèle et le soutien.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
42.10
Hauteur de l’emballage (en pouces)
8
Largeur assemblée (en pouces)
72
Largeur de l’emballage (en pouces)
75.6
Poids assemblé (en livres)
133
Poids de l’emballage (en livres)
126
Profondeur assemblé (en pouces)
24
Profondeur de l’emballage (en pouces)
27.7

Détails

Capacité de charge totale (en livres)
3000
Famille de couleurs
Multicolore
Matériau de larmature
Acier peint
Pays d'origine
CN-China
Roulettes
Non
À lépreuve des égratignures

Garanties et certifications

Garantie à vie : Si jamais votre outil à main Husky tombe en panne, rapportez-le et nous le remplacerons gratuitement. Appelez le 1-888-HD-HUSKY (1-888-434-8759) pour le service et l'assistance.
Établi, 72 poHusky Établi, 72 poLe banc de travail 72 po de Husky propose une surface de travail parfaite pour votre garage et tous les endroits où vous souhaitez réaliser des projets créatifs, tant à la maison quau bureau. Ses généreuses dimensions vous offrent une surface de travail lisse pour vos projets. La hauteur réglable de 28,3 po à 42,1 po par incrément de 1 po, assure votre confort, que vous travailliez près du sol, en position assise ou debout. En plus de bien supporter le poids, les pieds en acier robuste fournissent une base solide qui ne glisse pas, ne bouge pas et ne vacille pas pendant que vous êtes à luvre.
Husky
1000846226
CAD3992023-01-30
Home Depot Canada
Établi, 72 po est évalué 4.8 de 5 de 1959.
  • y_2023, m_1, d_27, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_269, tr_1690
  • loc_fr_CA, sid_1000846226, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 87ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Sturdy, butcher block top, easy to assemble. I replaced the (included) adjustable feet with (not... Sturdy, butcher block top, easy to assemble. I replaced the (included) adjustable feet with (not included) casters to make the bench even better. If you choose to do this too, the threaded insert for the feet is metric 12-1.75. But your casters to match or do what I did: but casters that have a 3/4-16 stem and replace it with a 12-1.75 bolt. It will work fine. Can't blame Husky or Home Depot for not including these since descent ones would add at least $75 to the price. But at $300, pretty good buy. If I tried to build this myself, I would easily spend $300 and spend a lot of time only to end up with something that probably wouldn't be as nice.
Date de publication: 2017-12-20
Rated 1 de 5 de par Defective table, major flaw If you are checking these reviews and decide to still purchase the workbench, upon opening your product CHECK THE PRE-DRILLED HOLES on the bottom of the table first. After wasting my evening assembling the work bench I struggled with the last steps of adding the stiffeners to the front and back of the table. With a few attempts and no luck I came online to check the reviews, and discovered many people purchasing this workbench are discovering the same issue. I was excited to see this workbench on sale from $380.00 to $265.00, upon discovering this major flaw, I am convinced it's not a coincidence these tables were on sale and Home Depot is trying to get rid of their faulty products.
Date de publication: 2020-11-28
Rated 4 de 5 de par So far so good. Only had this set up for about 2 weeks. But offering initial thoughts. Set up ... So far so good. Only had this set up for about 2 weeks. But offering initial thoughts. Set up was easy and simple. Overall seems to be of good quality and build. I really like the thick and finished top. Provides a very solid surface to work on. I would comment that the legs are a little "thin" from a material stand point, as when you tighten the bolts for height adjustment, you need to only 'snug' them as they will suck in and buckle the leg, making it hard to adjust height later. Should you need to do so. I'll follow up later on after more time and use, should there be any additional feed back that is needed
Date de publication: 2019-01-08
Rated 1 de 5 de par The table bits are all very sturdy and well finished.... The table bits are all very sturdy and well finished. The work surface itself is a super strong laminate and finished with tons of polyurethane.The problem is that the front and rear rails were not drilled properly to fasten to the bottom of the work surface. It's almost like the mixed the parts up between two different tables.As I already had it assembled in my shop I decided to just live with the lack of extra rigidity. Schlepping this thing all the way back to Home depot and dealing with a crowded Covidy store wasn't going to happen.
Date de publication: 2020-07-01
Rated 5 de 5 de par Been looking for a while and put off by price. It's a workbench after all, right? But pulled the ... Been looking for a while and put off by price. It's a workbench after all, right? But pulled the trigger and happy I did. Really solid. Went together quickly. All holes aligned well. No cross threaded nuts. Very nice. Went with the casters TomG recommends. Perfect fit and make this workbench unbeatable. I see why folks use it inside. Not mine. It will work hard. Already is. Added a shelf along bottom rails. 1 inch pine works but pretty much maxed out on weight.
Date de publication: 2017-12-18
Rated 5 de 5 de par This is a great, garage workbench. Mine came out... This is a great, garage workbench. Mine came out of the box in perfect condition; packing was amazing. I did the full assembly by myself and I am 72. It is fairly heavy. Instructions are good but pay attention. Make sure youidentify the front and back of the wood top because the spacing of the bolt holes is different. Also, the legs can be attached two ways and only one way is correct so look closely at the legs and attach them according to the instructions. If you attach one leg or both legs incorrectly, you will have to take it apart and reattach correctly. Good quality parts; I was impressed.
Date de publication: 2018-10-16
Rated 5 de 5 de par Heavy Duty Design Solid design. Easy to assemble. Replaced the adjustable foot pads with a set of Home Depot Everbilt 4-inch casters. (SKU 251390) Caster 7/16-14 thread is very close to foot pad M12-1.75 thread pattern. Insert until caster bearing cap contacts each leg. No jam nut required.
Date de publication: 2016-06-14
Rated 1 de 5 de par Worst manufacturing I've seen from a Husky product. This unit is on sale for a reason. The two main issues I had with this are the adjustable legs and the pre drilled holes for the stabilizers. One of the adjustable legs was either welded wrong or had misaligned holes, so would not align up at all. This was not a deal breaker yet as I was going to see if I could get a replacement. I also noticed, after coming back from reading a review, that the pre drilled holes for the stabilizers were in different areas- I didn't think much of this at first thinking the stabilizer bars were made to fit the way they were drilled. Nope. It looks like the table was placed wrong or the preprogrammed drill program was off during manufacturing as you'll see in my pictures. It's about 2 inches off. You might get lucky and get a good bench at a great price, but you might get one like mine and have to return it after spending a lot of time trying to figure it out.
Date de publication: 2021-01-17
  • y_2023, m_1, d_27, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_269, tr_1690
  • loc_fr_CA, sid_1000846226, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 51ms
  • REVIEWS, PRODUCT

Can it be mobile with casters

Posée par: marie
Thank you! Service Caster Corp was great. I got the casters for $76 plus tax. perfect fit.
Répondue par: Bill
Date de publication: 2021-07-26

Does this come with drawers?

Does this come with drawers?
Posée par: Ray
No Drawers included Ray ...
Répondue par: Pile2023
Date de publication: 2020-10-05

If I don't need height adjustment, should I just get the fixed leg version (#G7200S1-US)? But tha...

If I don't need height adjustment, should I just get the fixed leg version (#G7200S1-US)? But that version doesn't look as sturdy it's missing some cross-leg support bars and the legs have one side that is opened (not sure if that affects my plan to add casters). Trying to figure out why this version is $75 more and 40+ pounds heavier.
Posée par: badbob001
I also found out that the adjustable version's wood top is 1.25&quot; thick while the other version is only 0.75&quot; thick.
Répondue par: badbob001
Date de publication: 2021-07-26

How many people can seat comfortably on this table? Will be using to teach craft classes.

Posée par: Baig
If you mean &quot;at&quot; this table, I'd say a minimum of three (3) per side, depending on their size of course.
Répondue par: Steve
Date de publication: 2019-02-21

Does this come with movable cabinet to be placed underneath?

Does this come with movable cabinet to be placed underneath?
Posée par: Ray
The table itself does not come with a cabinet. It comes just as it pictured. However, Husky does make cabinets (fixed and mobile) that will fit underneath nicely. I have a 5-drawer cabinet on casters that fits. It is a nice table--pretty strong as well.
Répondue par: murph
Date de publication: 2021-05-26

What is the clearance under the table? I know it is adjustable but what is the measurement from t...

What is the clearance under the table? I know it is adjustable but what is the measurement from the top of the wood surface to the bottom of the steel frame just below the wood?
Posée par: Jim
If I'm understanding your question correctly... it is 4 inches from the top of the wood surface to the bottom of the steel frame that supports the top. BTW... this is a VERY nice bench.
Répondue par: DaveK
Date de publication: 2019-12-09

Can I mount an arbor press?

Posée par: Barney
Depends on the size of the Press! I have mounted a heavy duty vice on one end and a 1/2 HP grinder to the other - the top deck is solid - not partial board - and I simply drilled into the board with no issues - used 3/8&quot; bolts in both cases.
Répondue par: DBN
Date de publication: 2021-01-02

Is the length exactly 72&quot;? Or is it slightly smaller/larger?

Is the length exactly 72&quot;? Or is it slightly smaller/larger?
Posée par: krose
The width of the top is 72&quot;. It overhangs the side supports by 2&quot; on each side.
Répondue par: ALfromCT
Date de publication: 2020-06-19
  • y_2023, m_1, d_27, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_219
  • loc_fr_CA, sid_1000846226, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 63ms
  • QUESTIONS, PRODUCT