Magasinez les aubaines du Vendredi fou que vous ne voudrez pas manquer!  Magasiner les articles de l’événement

Aperçu

Modèle # 80842-10 Internet # 1000727709

Les unités de rangement au plafond HyLoft sont idéales pour le garage, le sous-sol, le grenier, le bureau, la véranda, sous les terrasses en bois ou dans toute pièce qui requiert un espace de rangement supplémentaire. La largeur et la hauteur de ce système de rangement au plafond sont réglables et peuvent être complètement personnalisées selon vos besoins. Ce système peut être utilisé avec ou sans plateforme. Vous pouvez également y ranger des outils à manche long, du bois de construction ou des kayaks.

  1. Poids maximum 90 kg (200 lb)
  1. Largeur et hauteur réglables
  1. Peinture blanche, fini poudre robuste
  1. Installation facile
  1. Toute la quincaillerie dinstallation est incluse

Spécifications

Dimensions

Hauteur assemblé (en pouces)
26
Hauteur de l’emballage (en pouces)
17
Largeur assemblée (en pouces)
33
Largeur de l’emballage (en pouces)
5.25
Poids assemblé (en livres)
6
Poids de l’emballage (en livres)
6.5
Profondeur assemblé (en pouces)
24.6
Profondeur de l’emballage (en pouces)
3.5

Détails

Caractéristiques des unités et des supports de rangement
Aucune caractéristique supplémentaire
Famille de couleurs
Blanc
Pays d'origine
CN-China
Type de montage
Montage au plafond

Garanties et certifications

Garantie à vie limitée, 800.990.6003, www.hyloft.com
Ensemble de rangement réglable au plafondHyloft Ensemble de rangement réglable au plafondLes unités de rangement au plafond HyLoft sont idéales pour le garage, le sous-sol, le grenier, le bureau, la véranda, sous les terrasses en bois ou dans toute pièce qui requiert un espace de rangement supplémentaire. La largeur et la hauteur de ce système de rangement au plafond sont réglables et peuvent être complètement personnalisées selon vos besoins. Ce système peut être utilisé avec ou sans plateforme. Vous pouvez également y ranger des outils à manche long, du bois de construction ou des kayaks.
Hyloft
1000727709
Ensemble de rangement réglable au plafond est évalué 4.3 de 5 de 132.
  • y_2022, m_11, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_129
  • loc_fr_CA, sid_1000727709, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 81ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par Good Functional Rack for the Money Rack was pretty simple to install. I made a rack above the washer/dryer to hold patio cushions. I extended it to the max 37". Had a problem drilling the holes for the lag bolts. The documentation is wrong! Haven't these people ever installed one? It says to drill a hole using a 3/16 bit for a 7/16 lag bolt! Good luck. You'll never get the bolt in. I went larger than 1/4. Use a socket wrench to tighten bolts - it's easier. Other than that, it does the job. It's strong & max weight is 250 lbs. but I would not put more than 100 on it. Nice white finish on it, all nuts & bolts are good quality. I think it's even make in USA.
Date de publication: 2012-08-23
Rated 4 de 5 de par Great for small area over garage door... This was almost perfect for the area above my open garage door. The description says that it is adjustable in height from 14 in to 23 in, but that is not quite accurate - I think the minimum height as configured is 16 inches. However, I drilled an additional screw hole on the downrod and used a hacksaw to remove 1 inch from the height and it works great. It's quite strong when mounted correctly, but make sure your mounting it directly to the rafters - drywall anchors are not going to do the trick. With a plywood base this easily holds 100 pounds, but I wouldn't push it much more - a few paint cans and tile tools is great, but I wouldn't try to put heavy duty tools or tires up there. Good luck!
Date de publication: 2011-06-27
Rated 5 de 5 de par We Created a Hanging Pot Rack We had a large, inaccessible space over stairs in the kitchen. We placed the adjustable ceiling storage racks at each end of the space, and mounted them into a ceiling beam. We purchased 2 x 10 cypress shelving (cut to length at at Home Depot), and rested it on the racks. On the underside, we hung a sturdy curtain rod with brackets, and bought 20 'S' hooks for our pots. Above the shelf we put decorative molds, and below, we hung the pots, being able to hang both the largest pot and the smallest pot at a convenient height for both, thanks to the adjustability of the racks. We would definitely recommend this product.
Date de publication: 2015-02-18
Rated 4 de 5 de par Good product for the money Instructions indicate the width of the brackets are adjustable up to 37", but if you use two fasteners at each joint as indicated, the useable width inside the brackets is 32" max. Also, the instructions indicate a maximum of 200 lbs. load for the brackets, but an adhesive sticker in the fastener package indicates a 250 lb. max. load for the brackets. I'll stick with the 200# load. Aside from those two items, the brackets seem to be well built. System is working well so far. I bought two; one over each garage stall.
Date de publication: 2013-09-27
Rated 5 de 5 de par Hiloft Garage Brackets These brackets are totally awesome. They are adjustable so fit exactly where I wanted. They are made of very high quality. Hold lots of weight. I have them lined up next to the center support beam in my garage to hold ALL my plastic tubes. The tubs are all labeled so you simply reach up and remove the tub that is needed without having to move anything. Very easy access, very organized and the space was wasted storage space to begin with. The instructions worked out wonderfully. I have plywood on top of mine. I highly recommend this product to anyone and everyone.
Date de publication: 2011-02-19
Rated 4 de 5 de par Install can be tricky. You must hit your ceiling joists perfectly otherwise you may find your sto... Install can be tricky. You must hit your ceiling joists perfectly otherwise you may find your stored items on the floor or worse on top of your car. I bought 2 sets of these. My plan was to place them parallel to each other. I purchased a 4x8 sheet of plywood from home depot and had them cut it in half lengthwise. So I had two pieces of plywood that were 2x8. Instead of mounting these hangars directly to my ceiling joists, I mounted two 2x6's each about six feet long to the joists. Each 2x6 is supported by three joists. That makes for a more secure base. I then attached the hangars directly to the 2x6's. The hangars are about 3 inches apart, that effectively gives me a 4x8 foot stotage area that is more secure and stable. These hangars are not perfect but they're pretty solid. I wouldn't overload but they will support a decent amount of weight. I would be ok with 200 pounds max. No more though. Good luck!
Date de publication: 2017-11-06
Rated 5 de 5 de par Easy to assemble and handy to use. When I moved my laundry to the garage, I needed more room in my 20 by 20 garage. I wanted to use the old laundry closet doors for shelving. I had to add four 4 foot 2 by 4s to the ceiling so I could install the brackets wide enough to accommodate the 30 inch wide doors.
Date de publication: 2013-10-29
Rated 5 de 5 de par Hyloft Ceiling Storage Rack With multiple Hyloft storge racks already installed on my garage ceiling, I chose this set of hanging supports to attach on the underside of a previously mounted rack that holds 6 large plastic storage tub/bins. I put two long, 32-inch-wide wire racks side-by-side on the brackets, and then stored long items on this lower rack. Total weight is a factor to consider, and this lower rack is so low I'd bump my head on it, so it's positioned over an approximately 5-ft.-tall clothes wardrobe unit. Installation took about 20 minutes, including loading time. An excellent solution for the price. NOTE: This item isn't in stock at the local store, so plan ahead... took 3 or 4 days for delivery. For me, a great solution at a good price in acceptable time.
Date de publication: 2014-08-12
  • y_2022, m_11, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_129
  • loc_fr_CA, sid_1000727709, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Can I mount this to a sloping ceiling, with one side of each rack shorter than the other?

Can I mount this to a sloping ceiling, with one side of each rack shorter than the other?
Posée par: GARDENNUT
Depends on the slope/pitch of your roof. There are nine adjustment holes for each ceiling leg, this should get you close to level if your pitch is not too extreme/
Répondue par: MtyMse
Date de publication: 2018-09-24

Want to convert a 14ft extension ladder to wall shelve. Can the ceiling mount be used on wall st...

Want to convert a 14ft extension ladder to wall shelve. Can the ceiling mount be used on wall studs instead of the ceiling?
Posée par: Sam
I don't know about that. If you are thinking of attaching them to the stud so that the weight is perpendicular to the connection, I would not do that. You are asking the metal right at the connection point to hold a lot of weight at an angle, as opposed to straight down. There is no support that is in line with the weight. You would need some very large anchors into the stud but the holes in the mounting plates are not big enough. Overall, I would use as intended.
Répondue par: ProfJeff
Date de publication: 2019-01-16

Can you rotate the installation direction?

The installation instructions show the "U" shaped brackets installed parallel with the ceiling joists. Can the brackets be installed perpendicular instead?
Posée par: Noremac
It shouldn't make any difference.
Répondue par: StorageMaven
Date de publication: 2019-01-16

My garage is unfinished. The pitched roof is exposed. Can I mount these on the rafters? The rafte...

My garage is unfinished. The pitched roof is exposed. Can I mount these on the rafters? The rafters are pitched at 30 degrees (+ or -). It looks line the vertical elements are adjustable but can the brackets rotate so the unit hangs straight down with the bracket attached flush with the rafter?
Posée par: Mike
Absolutely! This product is designed to work with flat or vaulted ceilings. Having the unfinished ceiling with exposed rafters means that it will be easier to locate the center of the rafters when installing.
Répondue par: Knape & Vogt
Date de publication: 2017-03-22

Can you attach plywood to the bars using screws to make it more solid?

I just noticed that the weight capacity is 250 lbs, so please disregard my last question.
Posée par: Marcus
Yes. Instead of using screws to secure the plywood, I notched the corners of the plywood so it wrapped a little bit around each vertical bracket leg. Then, I slid one end of the plywood onto a fully assembled bracket, and supported the other end of the plywood during final assembly of the second bracket. With all four corners cut this way, the plywood cannot slip off the brackets, and there are no additional screws to come loose or scratch items you place on the plywood.
Répondue par: online
Date de publication: 2021-01-05

Can I return this to a Home Depot store without a receipt?

Posée par: Neil2121
not really sure, I'd check with you're local store.
Répondue par: Rockandroller
Date de publication: 2018-02-28

Could I use a set of these to hang a HyLoft 45 in. x 15 in. shelf under a table to hold a compute...

Could I use a set of these to hang a HyLoft 45 in. x 15 in. shelf under a table to hold a computer and cables? The table top is 48" long and 24" in depth. The table is 41" tall.
Posée par: BuildingWorkTables
Thank You MTYMSE but I can't find any on the site. Our tables are 48" wide by 24" deep so the shelf would need to be 47" wide at most, and 12" - 15" deep at most to work. I needs to hang from the table top or rest on the side and back braces of the legs.
Répondue par: BuildingWorkTables
Date de publication: 2019-06-13

What is the weight capacity of this system?

Posée par: Marcus
This product can hold up to 250 lbs if evenly distributed.
Répondue par: Knape & Vogt
Date de publication: 2018-01-09
  • y_2022, m_11, d_27, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_fr_CA, sid_1000727709, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 49ms
  • QUESTIONS, PRODUCT