Le Vendredi fou du printemps des Pros est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # I-SLED36 Internet # 1001025110

La flexibilité et l'installation sur de longues distances sont les principales caractéristiques de nos linéaires PowerLED. Les linéaires au DEL de Illume sont disponibles en trois longueurs, 12 pouces, 24 pouces ou 36 pouces, vous pouvez ainsi facilement les ajouter à n'importe quelle configuration existante. Une connexion très discrète assure une distribution d'éclairage uniforme. Pour montage en surface seulement. Le profil très discret permet de dissimuler l'appareil derrière les garnitures d'ébénisterie courantes. Plusieurs luminaires peuvent être inter-connectés, jusqu'à 200W. Pour faciliter l'utilisation et l'installation, il est doté d'un cordon d'alimentation de 1,8 m de long et d'un interrupteur intégré au luminaire.

  1. 12 watts, 1200 lumens, blanc chaud de 3000K
  1. Transformateur DEL graduable intégré de 120V
  1. Large diffusion linéaire douce avec un rendement lumineux uniforme
  1. Émission minimale de chaleur et aucune émission de lumière UV
  1. Plus de 35 000 heures de vie utile
  1. Interconnectable jusqu'à 200W, profil bas linéaire

Spécifications

Dimensions

Hauteur assemblé (en pouces)
2
Hauteur de l’emballage (en pouces)
2
Largeur assemblée (en pouces)
2
Largeur de l’emballage (en pouces)
2
Poids assemblé (en livres)
1.3
Poids de l’emballage (en livres)
1.45
Profondeur assemblé (en pouces)
36
Profondeur de l’emballage (en pouces)
38

Détails

Caractéristiques du luminaire : À intensité variable
Ampoule comprise
ENERGY STAR®
Non
Luminosité (en lumens)
1200
Méthode de fixation
Support a visser
Pays d'origine
CN-China
Type dampoule
Del
Type de raccordement
Enfichable

Garanties et certifications

Garantie limitée de trois 3 ans
Linéaire PowerLED de 36 pouces au profil discret pour sous cabinet, 120V, fini aluminium - ENERGY STAR®Illume Linéaire PowerLED de 36 pouces au profil discret pour sous cabinet, 120V, fini aluminium - ENERGY STAR®La flexibilité et l'installation sur de longues distances sont les principales caractéristiques de nos linéaires PowerLED. Les linéaires au DEL de Illume sont disponibles en trois longueurs, 12 pouces, 24 pouces ou 36 pouces, vous pouvez ainsi facilement les ajouter à n'importe quelle configuration existante. Une connexion très discrète assure une distribution d'éclairage uniforme. Pour montage en surface seulement. Le profil très discret permet de dissimuler l'appareil derrière les garnitures d'ébénisterie courantes. Plusieurs luminaires peuvent être inter-connectés, jusqu'à 200W. Pour faciliter l'utilisation et l'installation, il est doté d'un cordon d'alimentation de 1,8 m de long et d'un interrupteur intégré au luminaire.
Illume
1001025110
CAD79.982024-04-19
Home Depot Canada
Linéaire PowerLED de 36 pouces au profil discret pour sous cabinet, 120V, fini aluminium - ENERGY STAR® est évalué 4.3 de 5 de 20.
  • y_2024, m_4, d_18, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_9, tr_11
  • loc_fr_CA, sid_1001025110, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 71ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Excellent Under Counter LED Light I bought 7 of these in various sizes to replace 15 year old fluorescent fixtures. These units are generally easy to install, link together and provide much more illumination than the fluorescent units. Having 3 colour spectrum choices is a bonus. My only criticism is that each unit comes with a 6 ft. plug in power cord. I did not need any of these as all my units are direct wire. A suggestion would be to offer these power cords as an option for those who wish to plug in. I received good information directly from the manufacturer.
Date de publication: 2020-04-27
Rated 4 de 5 de par Great replacement for old fluorescent Connected the I-120JB Junction Box to the Illume I-SLED36. Very happy with the light. I threw away the Philips screws and used some #5x5/8 wood screws with a #1 Robertson head and drilled 1/16" pilot holes. Made the installation much easier. It comes with a power cord that has an inline on/off switch that can plug into an outlet, but I already had electrical cable to a light switch, so I needed a junction box and the 60" extension cable. Snapping the light into the clips was not as easy as the instructions made it sound. I worried that I would break the light with too much force. But I finally pushed the back metal clip back a little and then it finally snapped into place. Now that it is in we are happy with how it looks. Uses half the power of the fluorescent tube that was there before and is brighter. And LED has a much longer life than the fluorescent.
Date de publication: 2018-12-31
Rated 5 de 5 de par Brilliant, bright, classy Bottom line up front: They're great. Bright, small, modern appeal. Super easy install. Each light comes with a light switch, the light itself, mounting hardware, and a light connector (so that other light bars can be plugged directly in to each other - in one spot I plugged a 36" and a 12" together to make one continuous 48" light). You'll want to buy the 60" extension cord to connect the lights together where you aren't going to plug the lights in unit-to-unit. See my included pictures, there are two 60" extension cords on either side of the microwave to "bridge the gap" where the lights aren't plugged directly in to each other. Each 12" and 24" light comes with 2 mounting brackets (each only takes one screw, which is plenty for such lightweight fixtures) and the 36" light comes with 3 mounting brackets. The Good: - Easy install, brackets can be installed at any point along the length of the light, and they swivel the light to one side - Look great, and are pretty low-profile - Very bright (brighter than my overhead lights, and they're pretty good) - Lights can be connected directly to each other, adding options for length - LED, only get a bit warm to the touch after being on a long time - Can be permanently wired-in to 120v power, although I haven't done so yet. Probably won't. Hiding excess wire was surprisingly easy, or you could cut the extension wires to required length. - You can wire together something like 200 watts of these lights, which is far more than many other LED products. Gives you the freedom to make one switch for your under-cabinet lighting, even if you need a lot of it. The Bad: - A short 6"-12" connecting wire to allow you to daisy-chain lights across a small gap should be included (such as where my microwave is). You'll need to buy the 60" 120v extension wire and either cut it to size or hide the excess wire. - The power switch isn't spectacular - but it works fine and is pretty easy to tuck away wherever you want it. Most people will likely opt to wire the lights directly to a light switch, so it shouldn't matter too much. - Would have been nice if each light could be individually turned on or off while powered serially/daisy-chained like I have. Another very minor gripe. - It would likely be pretty tricky to incorporate other products from Illume's LED product line (such as pot lights/pucks), as they use different voltages and connectors. I opted not to use any pucks. They look great, 5/5, would purchase again.
Date de publication: 2017-09-17
Rated 4 de 5 de par easy to install I bought 2 strips (different lengths) and used the direct wire in connection to install under cabinet lighting for a wet bar. The various lengths allow you to get exactly the right length to match the cabinets. The lights are dimmable so you can install a dimmer to get just the right level of lighting. The brackets allow you to mount these easily and slide them around to get the right position.
Date de publication: 2018-08-21
Rated 3 de 5 de par Great...until it wasn't Delighted with installation - a 36' and a 24" combined to provide perfect lighting in the under-cupboard space. Until less than two months after installation, the 36' died. Dead. it is first in line and the 24' still works, so it is not a faulty connection. Hoping that I can get an exchange when we are allowed to travel.
Date de publication: 2020-05-20
Rated 5 de 5 de par Illume 36” under cabinet LED Lighting The light performed as advertized. It was the best option for our project available at Home Depot with the bonus of free shipping. Installation was a bit clunky but after a few lights it became easier.
Date de publication: 2019-11-30
Rated 2 de 5 de par The actual length of the light fixture received from Home... The actual length of the light fixture received from Home Depot (36 in.) did not match the length given in the description (34 in.), so it did not fit properly under the 36 in. wide cabinet as intended. It was necessary to cut a hole in the side of the cabinet in order to install the fixture. Warning: if you intend to install this fixture under a 36 in. side upper cabinet, it will not fit, since the side panels on the cabinet reduce the useable space to 34.5 in.
Date de publication: 2022-04-06
Rated 3 de 5 de par Has 1 second lag turning on The light has 1 second lag between turning on power and light turning on. And that lag looks really bad when other lights (that turn on instantly) are wired to the same switch. I bought same exact same model of lights a year earlier and those turn on instantly.
Date de publication: 2021-09-22
  • y_2024, m_4, d_18, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_9, tr_11
  • loc_fr_CA, sid_1001025110, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 48ms
  • REVIEWS, PRODUCT

Is this a Type A LED bar, that can replace an, already wired in, 36 inch florescent light under cabinet light. 

Posée par: Seeker
Thank you for choosing Illume. This cannot be use in the current florescent installation. It can either be installed using the plug-in driver provided in the kit or as a hardwire using the junction box which goes with this linear.
Répondue par: Illume Lighting Team
Date de publication: 2022-11-07

Is this light suitable for wet locations, such as above a kitchen sink?

Posée par: Twoplanks
The 110V cable plugs straight to the fixture. I would not dare to do it unless the connection is somwhat waterproofed.
Répondue par: Robert
Date de publication: 2019-09-07

How do you remove the plastic cover so you can plug in the cord?

Posée par: Stupid
Hello and thank you for reaching Illume. Concerning the plastic end cap we added to the end of the fixture as a default protection coming out of the manufacturer, simply take a flat screwdriver to put in the slot, this will allow you to pop it out to be able to connect the wire afterward. You can always give us a call if you need more assistance. Have a great day.
Répondue par: Illume Lighting Team
Date de publication: 2024-02-12

Is the LED lamp replaceable?

Posée par: Barry
Thank you for choosing illume. None of the components in the linear can be changed. If the fixture stops working withing the warranty period, please contact us and it will be our pleasure to send you a replacement unit.
Répondue par: Illume Lighting Team
Date de publication: 2023-05-07

Where is the on/off switch for this fixture - on the fixture itself or on the cord?

Posée par: Flick
On the cord
Répondue par: Zippo 54
Date de publication: 2024-01-15

What colour temperature is the light?

Posée par: GeeK
Thank you for choosing illume® This LED strip is warm white (3000K).
Répondue par: Illume Lighting Team
Date de publication: 2019-05-05

I bought the 36" bar to replace hardwired pucks that connect to a wall switch. Do I need the Illume junction box? or can I connect directly to the wall switch?

Posée par: LLStephens
Thank you for choosing illume. For a hardwire connection you will need to purchase the I-120JB.
Répondue par: Illume Lighting Team
Date de publication: 2021-05-08

Hello, is it possible for this light to be dimmable with the plug-in installation? What components would be required? Thank you,

Posée par: Bright Light 27
Thank you for choosing illume. To be able to dimm the linears when using a plug-in driver, you will need to have a dimmable wall switch which controls the outlet which powers the fixtures.
Répondue par: Illume Lighting Team
Date de publication: 2020-09-22
  • y_2024, m_4, d_18, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_fr_CA, sid_1001025110, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 70ms
  • QUESTIONS, PRODUCT