• Panier
  • NOS PRIX SONT IMBATTABLES. NOUS LE GARANTISSONS.Certaines conditions s’appliquent

    King Xypex high'n dry, 11 kg

    Modèle nº 12051011|Nº UGS 1000410303

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # 12051011 Internet # 1000410303

    Imperméabilisez les surfaces en béton! Utilisez KING Xypex highn dry, un revêtement chimique à appliquer sur les surfaces de béton pour les rendre étanches. Offert en contenants de 5 kg et de 11 kg. KING alliez la solidité à la satisfaction depuis 1928.

    1. Revêtement d'imperméabilisation chimique de première qualité, permanent, non soluble, à appliquer sur la surface
    1. Indiqué pour imperméabiliser les murs de sous-sol, fondations, piscines et réservoirs
    1. La formation de cristaux empêche l'infiltration de l'eau par pression hydrostatique
    1. Peut être appliqué à l'intérieur ou à l'extérieur
    1. Facile à appliquer

    Spécifications

    Dimensions

    Hauteur assemblé
    11
    Hauteur de l’emballage (en pouces)
    11
    Largeur assemblée
    12
    Largeur de l’emballage (en pouces)
    12
    Poids assemblé
    24
    Poids de l’emballage (en livres)
    24
    Profondeur assemblé
    12
    Profondeur de l’emballage (en pouces)
    12

    Détails

    Matériau du pied de lampe
    Béton
    Pays d'origine
    CA-Canada
    Temps de séchage (h)
    2
    Type
    Scellants
    Utilisation suggérée
    Tout usage

    Garanties et certifications

    Ce produit est conçu pour procurer le rendement prescrit dans la présente fiche technique. Si toutefois il est utilisé dans des conditions autres que celles pour lesquelles il est destiné, ou sil est utilisé dune façon contraire aux recommandations prescrites dans la présente fiche technique, il risque de ne pas procurer le rendement prescrit aux présentes.
    Xypex high'n dry, 11 kgPhoto of productImperméabilisez les surfaces en béton! Utilisez KING Xypex highn dry, un revêtement chimique à appliquer sur les surfaces de béton pour les rendre étanches. Offert en contenants de 5 kg et de 11 kg. KING alliez la solidité à la satisfaction depuis 1928.
    King
    1000410303
    Xypex high'n dry, 11 kg est évalué 2.3 de 5 de 3.
    • y_2019, m_10, d_20, h_9
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_fr_CA, sid_1000410303, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 86ms
    • REVIEWS, PRODUCT
    Rated 1 de 5 de par Really waste of money! I followed King Xypex's instructions very carefully and applied many layers of the product interlaced by a high grade cement "Sakrete top'n bond" on the floor and wall of my basement that is leaking water. The leaking is still there after many days, even when the weather is dry. I believe King needed to listen to more cases like mine and do some on-site study of why this outrageously expensive product is not working as promised.
    Date de publication: 2015-08-20
    Rated 5 de 5 de par Lee Roberts I have used this product several times on my basement, my fish pond etc. and it's been over 14 years trouble free. I also know many contractors who use this as part of their business and swear it is simply the best concrete waterproofing product on the market.
    Date de publication: 2015-02-04
    Rated 1 de 5 de par WASTE OF MONEY!! Don't buy this stuff. It does squat!! I put some on my basement walls to stop a few moisture seeps and it did absolutely NOTHING. My neighbour used 6 of these big buckets worth of stuff (3 coats) and same conclusion... worthless!! And the packaging says you can use it to waterproof a swimming pool! Sure - if it has a plastic liner in it, maybe. This manufacture should pull this product off the shelf. I'm sure it's nothing more than cement powder- for $55 bucks?!
    Date de publication: 2010-07-24
    • y_2019, m_10, d_20, h_9
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_fr_CA, sid_1000410303, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 29ms
    • REVIEWS, PRODUCT

    We are considering using this on cider block in our warehouse. Which application method works best?

    Posée par: MARS
    Thank you for your inquiry. KING Xypex high'n dry is a surface applied chemical treatment for concrete designed to prevent water seepage due to hydrostatic pressure. The application produces a non-soluble crystalline growth within the pores of the concrete. This crystalline formation penetrates deep into the damp concrete becoming a permanent part of the structure and effectively seals it against water seepage. FEATURES & BENEFITS • Permanent waterproofing • Interior or exterior application • Easy to apply USES Ideal for waterproofing bare concrete surfaces such as basement walls, floors, tunnels, storage tanks, cisterns, ponds and swimming pools. PROCEDURES Mix and substrate temperatures should be maintained between 5 ºC and 30 ºC (40 ºF and 86 ºF) for at least 24 hours prior to and 48 hours after. Surface Preparation: Surfaces to be coated must be structurally sound and clean. Remove all delaminated or unsound concrete by chipping with a hammer and chisel or using a stiff wire brush. Clean the surface of dirt, grime, mold or any other substance that would prevent the penetration of the crystalline growth. Remove all paint. Smooth concrete must be lightly roughened or etched. Repair all cracks and holes with SAKRETE plug-tite. Clean the area with potable water, leaving the concrete saturated but free of standing water. Some very porous concretes may require several applications of water to ensure complete saturation. Mixing: Mix 5 parts of KING Xypex high'n dry with 2 parts of clean water until a creamy consistency is obtained; avoid a “soupy” mix. Mix only as much as can be applied within 10 minutes. Use immediately after mixing. If mix starts to set, agitate briefly but do not add more water. Placing: After mixing, apply KING Xypex high'n dry to prepared surface with a semi-stiff, thick bristle brush. Always dip the brush to the bottom of the mixing pail, mixing as you obtain more material to ensure that the solids do not settle. If the mixture thickens, simply re-agitate, do not add more water. In cases of strong hydrostatic pressure it may be necessary to apply more than one coat. CURING The presence of moisture is most important to produce the crystalline growth within the concrete and proper hardening of the coating. Allow KING Xypex high'n dry to set until the surface is hard to the touch approximately 1-2 hours. The treatment must be kept damp for 48 hours following application. Under normal conditions, it is sufficient to fog spray the coating 3 times a day for a minimum of 2 days. This also prevents the chalking or dusting of the coating. NOTE: For concrete structures that hold water (ponds, swimming pools, etc.) keep damp for 3 days, then allow to set (air cure) for 12 days. Flush thoroughly before filling. In hot weather above 21 °C (70 °F) care must be taken to prevent the coating from drying too quickly. Dampen the coating more frequently during the curing process than would be required under normal conditions. PAINTING Concrete must be fully cured (approximately 28 days) and dry before painting. Refer to paint manufacturer directions for application instructions.
    Répondue par: King Packaged Materials
    Date de publication: 2019-01-04

    I have just applied 2 coats of Xypex High n Dry on a damp basement, below grade concrete wall. I am planning on applying a rubberized compound (Blue Max Liquid Rubber) by Ames as added insurance. Is this OK, and how long do I need to wait?

    Posée par: Steve
    As this is a coating not supplied by KING it is recommended to refer to paint manufacturer directions for application instructions over KING Xypex. Please follow directions for Applying Xypex : Xypex Mix and substrate temperatures should be maintained between 5 ºC and 30 ºC (40 ºF and 86 ºF) for at least 24 hours prior to and 48 hours after. Surface Preparation: Surfaces to be coated must be structurally sound and clean. Remove all delaminated or unsound concrete by chipping with a hammer and chisel or using a stiff wire brush. Clean the surface of dirt, grime, mold or any other substance that would prevent the penetration of the crystalline growth. Remove all paint. Smooth concrete must be lightly roughened or etched. Repair all cracks and holes with SAKRETE plug-tite. Clean the area with potable water, leaving the concrete saturated but free of standing water. Some very porous concretes may require several applications of water to ensure complete saturation. Mixing: Mix 5 parts of KING Xypex high’n dry with 2 parts of clean water until a creamy consistency is obtained; avoid a “soupy” mix. Mix only as much as can be applied within 10 minutes. Use immediately after mixing. If mix starts to set, agitate briefl y but do not add more water. Placing: After mixing apply KING Xypex high’n dry to prepared surface with a semi-stiff, thick bristle brush. Always dip the brush to the bottom of the mixing pail, mixing as you obtain more material to ensure that the solids do not settle. If the mixture thickens, simply re-agitate, do not add more water. In cases of strong hydrostatic pressure it may be necessary to apply more than one coat. Curing: The presence of moisture is most important to produce the crystalline growth within the concrete and proper hardening of the coating. Allow KING Xypex high’n dry to set until the surface is hard to the touch approximately 1-2 hours. The treatment must be kept damp for 48 hours following application. Under normal conditions, it is sufficient to fog spray the coating 3 times a day for a minimum of 2 days. This also prevents the chalking or dusting of the coating. Note: For concrete structures that hold water (ponds, swimming pools, etc.) keep damp for 3 days, then allow to set (air cure) for 12 days. Flush thoroughly before filling. In hot weather above 21 °C (70 °F) care must be taken to prevent the coating from drying too quickly. Dampen the coating more frequently during the curing process than would be required under normal conditions. PAINTING Refer to paint manufacturer directions for application instructions.
    Répondue par: The Home Depot Canada
    Date de publication: 2018-09-17

    I wrote a negative review about this product 11 months ago but I recently discovered that the product works well if I use a different application procedure. Hence I wanted to amend my review but this attempt was disallowed. Any advice?

    Posée par: Scarborougher
    Good morning Scarborougher, We appreciate and thank you very much for your Honesty. Home Depot’s has a great, resourceful web site, unfortunately with regards to reviews we have found does not allow for follow ups or revisions to them. Thank you again. King Packaged Materials Company.
    Répondue par: King Packaged Materials
    Date de publication: 2019-02-22

    are multiple coats advised, or is one usually sufficient?

    Posée par: Anonyme
    one coat is sufficient. In cases of strong hydrostatic pressure it may be necessary to apply more than one coat.
    Répondue par: KingSakreteRep
    Date de publication: 2018-11-28

    Can this product be used on an old concrete floor which was was poured directly onto the earth and has been wicking damp ?

    Posée par: Anonyme
    Ideal for waterproofing bare concrete surfaces such as basement walls,floors, tunnels, storage tanks, cisterns, ponds, swimming pools, etc.Surface preparation: Surfaces to be coated must be structurally sound and clean. Remove all delaminated or unsound concrete by chipping with a hammer and chisel or using a stiff wire brush. Clean the surface of dirt, grime, mold or any other substance that would prevent the penetration of the crystalline growth. Remove all paint. Smooth concrete must be lightly roughened or etched. Repair all cracks and holes with SAKRETE plug-tite. Clean the area with potable water, leaving the concrete saturated but free of standing water. Some very porous concretes may require several applications of water to ensure complete saturation.
    Répondue par: KingSakreteRep
    Date de publication: 2015-06-05

    can xypex high and dry be used on a concrete wall that was previously coated with a sealant but is now leaking

    Posée par: Anonyme
    Xypex is Ideal for waterproofing BARE concrete surfaces such as basement walls, floors, tunnels, storage tanks, cisterns, ponds, swimming pools. SAKRETE Brush'n seal is recommedned over sealed walls. Cacks should be repaired using SAKRETE plug tite.
    Répondue par: KingSakreteRep
    Date de publication: 2015-06-05

    xypex high'dry

    how do I remove old paint before using above product on interior walls
    Posée par: Anonyme
    Remove paint using a mechanical means. Wire brush, scrape or a paint remover. Review the issue with your local Home Depot paint dept.
    Répondue par: KingSakreteRep
    Date de publication: 2015-06-05

    can this product be used to repair a cracked (and therefore leaking) concrete laundry tub?

    Posée par: Anonyme
    King Plug tite would work best here to repair the cracks. plug•tite is a quick-setting hydraulic cement designed to stop the fl ow of water through breaks in all concrete and masonry surfaces. FEATURES & BENEFITS • hydraulic action – expands in the crack • stops fl owing water immediately • sets in minutes • non shrinking USES Stop active water leaks through breaks in all concrete and masonry surfaces, such as basement walls or fl oors, tunnels, storage tanks, pools, pits, cisterns, construction faults and holes. May also be used on inactive leaks.
    Répondue par: King Packaged Materials
    Date de publication: 2018-01-10
    • y_2019, m_10, d_20, h_9CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_17
    • loc_fr_CA, sid_1000410303, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 113ms
    • QUESTIONS, PRODUCT
    <?xml version="1.0" encoding="utf-8"?>