L’événement Les journées Milwaukee est en cours. N’attendez pas!  Magasiner maintenant

Aperçu

Modèle # VDV500-820 Internet # 1001632690

Cette trousse comprend les outils nécessaires pour générer une tonalité et détecter des câbles dans les systèmes de câblage courants. Le générateur de tonalité haut de gamme est équipé de pinces à lit à clous coudés (ABN) qui se fixent solidement au câble et émet cinq tonalités distinctes. Une prise RJ11 pour connexion à un téléphone et les prises de données RJ45 servent à tester des tonalités. Le générateur vérifie également la continuité et la polarité, qui sont indiquées par des DEL clairement identifiées. La sonde repère la tonalité émise par le générateur. Le haut-parleur à volume réglable amplifie la tonalité. La prise de 3,5 mm permet de brancher un casque découte (vendu séparément) dans des endroits bruyants. La sonde est dotée dun embout durable non métallique qui se remplace sans outil. La sonde permet de tester des blocs de distribution sans perturber les autres services.

  1. Générateur de tonalité et sonde de tonalité de qualité professionnelle pour les fils hors tension
  1. Toner-Pro disposant de 5 tonalités avec des rythmes distincts, transmission jusquà 1000 pi
  1. Pinces à lit à clous coudé (ABN) robustes qui se branchent aux câbles de façon sécuritaire
  1. Prise RJ11 pour connexion à un téléphone et prises de données RJ45 pour tester des paires de conducteurs
  1. Générateur Toner-Pro testant la continuité et la polarité, qui sont indiquées par des DEL clairement identifiées
  1. La sonde Probe-Pro comprend une prise de 3,5 mm pour casque découte (non inclus) pour une utilisation dans des endroits bruyant
  1. Sonde réactive avec pointe conductrice remplaçable non métallique durable (VDV999-068) - vendue séparément.
  1. Lampe de travail sur la pointe de la sonde pour une utilisation dans les espaces sombres.
  1. Bornier sur la sonde pour confirmer la paire de tonalités
  1. Chaque outil comprend 4X piles AAA
  1. Pochette personnalisée, rembourrée, divisée et à fermeture éclair pour un rangement pratique (VDV770-500) incluse dans le kit.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
12
Hauteur de l’emballage (en pouces)
12.5
Largeur assemblée (en pouces)
7
Largeur de l’emballage (en pouces)
7
Poids assemblé (en livres)
0.82
Poids de l’emballage (en livres)
1.53
Profondeur assemblé (en pouces)
3
Profondeur de l’emballage (en pouces)
3.5

Détails

Article individuel, Ensemble
Article individuel, Ensemble
Caractéristiques
Alerte sonore
Fonction de testeur
Câbles de données et voix
Pays d'origine
CN-China
Source dalimentation
À piles
Type d'appareil numérique
Numérique
Type de batterie
Batterie remplaçable
Type de testeur
Testeurs de câblages

Garanties et certifications

Les produits Klein Tools, fabriqués et vendus à des fins commerciales ou industrielles, sont garantis sans défauts de matériaux et de fabrication pour la durée de vie normale du produit.
Kit de traçage de fils électriques Pro Tone and ProbeKlein Tools Kit de traçage de fils électriques Pro Tone and ProbeCette trousse comprend les outils nécessaires pour générer une tonalité et détecter des câbles dans les systèmes de câblage courants. Le générateur de tonalité haut de gamme est équipé de pinces à lit à clous coudés (ABN) qui se fixent solidement au câble et émet cinq tonalités distinctes. Une prise RJ11 pour connexion à un téléphone et les prises de données RJ45 servent à tester des tonalités. Le générateur vérifie également la continuité et la polarité, qui sont indiquées par des DEL clairement identifiées. La sonde repère la tonalité émise par le générateur. Le haut-parleur à volume réglable amplifie la tonalité. La prise de 3,5 mm permet de brancher un casque découte (vendu séparément) dans des endroits bruyants. La sonde est dotée dun embout durable non métallique qui se remplace sans outil. La sonde permet de tester des blocs de distribution sans perturber les autres services.
Klein Tools
1001632690
CAD1252024-07-19
Home Depot Canada
Kit de traçage de fils électriques Pro Tone and Probe est évalué 4.5 de 5 de 257.
  • y_2024, m_7, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_62, tr_195
  • loc_fr_CA, sid_1001632690, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 58ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Got the job done where others failed Needed to trace the path of a **de-energized** 120V circuit in a residential property. A couple attempts with a high end competitor yielded a sketchy signal that was eventually lost in an 8" wall. Didn't expect much from a $75 toner/probe but opted to give it a whirl based on promising reviews on various sites. Wow - found the wire immediately with a loud signal that was easy to follow. Eventually located a buried box (big no-no!) where poorly installed wire nuts had given way. Never would have found that without extensive rip outs or a costly professional grade rental. You can bet I'll be added Klein to my list of candidates to consider the next time I need a specialized tool.
Date de publication: 2020-06-29
Rated 1 de 5 de par Dud for me I bought this toner to replace my old amprobe toner that I have had for years used may be 3-5 times and now it will not tone at all, yep replaced batteries still nothing, I needed it today to try to trace some wires on a last minute service call and was not able to finish the job, so have to schedule another trip in hopes I can locate a toner that will work. I am a Klein die hard love Klein but this is was very upsetting to me. Will be contacting them tom. to see if this is a known issue or not and see what options are ahead of me. This will be the first time ever having an issue with Klein product.
Date de publication: 2022-08-16
Rated 3 de 5 de par It actually works! This is the lowest level to buy Tried the cheaper level of tone/probe device and one from Sperry with disappointment, just don't work in real life, took back to store. . This one, the Tone and Probe Pro actually works! I can trace single wire in my autos, boat, alarm system. For home electrical on unexposed wires, I need to hook the tone generator to both hot and neutral using a pigtail plug I made. But I can trace to outlets and behind most walls to the breaker box. Its a bit messy, works best on the high Hz setting. It really helps having different tone settings. If I expose wire ends though I can to single wire as if having a multimeter/continuity tester or power probe with super duper long leads.. My wish list for this though would be to have banana plugs on the tone generator so I can swap connection methods. I'll have to modify myself, thus 3 not 5 stars.
Date de publication: 2021-08-08
Rated 5 de 5 de par Life saver! [This review was collected as part of a promotion.] I purchased this about three months ago and it has already proved itself indispensable! I have used it to find buried electrical boxes, verify jumpers, and trace circuits in walls. This is an absolute must-have for troubleshooting, much faster than using a meter to test continuity. Highly recommended!
Date de publication: 2021-03-24
Rated 5 de 5 de par Invisible dog fence wire break The alternating tone feature is brilliant. With all the background noise, I found it impossible to determine the change in tone around the area of the break using a different brand tool. But with the alternating tone feature on this one, I was able to discern the wire break change in tone from background noise in less than 10 minutes. In my circumstance, I could only get signal when the tool was actually touching the wire, but still worked out great. Wasted hours using a different cheaper device before this.
Date de publication: 2021-08-09
Rated 5 de 5 de par Helped me to locate wires behind the wall. There were some 240 V wires in the breaker box. I used this Klein tracer tool to locate where the wires were originating from. It worked. I located the wires near an existing outlet. I removed the outlet box from the wall to access the 240 V wires. I was very happy with the outcome.
Date de publication: 2022-10-18
Rated 4 de 5 de par This served my needs very well. I had to tone out 70 cables in a batch of 200+ cables. Several pe... This served my needs very well. I had to tone out 70 cables in a batch of 200+ cables. Several people on You Tube gave it a bad rating but I don't see why. I was glad I bought this one. I am a contractor with 40 years of trade experience.
Date de publication: 2020-07-11
Rated 5 de 5 de par Great tool. NO regrets. This is a fantastic tool for the price. I have used it twice since purchasing to find shorts in circuits causing outlets and/or lights not to work. Klein states it can't be used for tracing wires in walls but they may want to retract that statement. I have not had any difficulty tracing lines in walls, across ceilings or wherever they go. If I had to pick something I don't like, its that the circuit being traced cannot be powered. If you have a short or open in the midpoint of the run, you might as well flip a coin to determine which direction to follow the signal. This tool has quickly become one of my favorites for the immense time and money savings it has provided. Thank you Klein for such a fine tool at a reasonable price.
Date de publication: 2023-04-25
  • y_2024, m_7, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_62, tr_195
  • loc_fr_CA, sid_1001632690, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 31ms
  • REVIEWS, PRODUCT

Will this work for continuity testing of household a/c circuits. I think i have a chewed through cable in a wall

Posée par: Marco
It only works on unpowered circuits.  If the wires are broken you will be able to see the point at which the wire is broken as long as you have access to the wire. 
Répondue par: Jim3
Date de publication: 2023-05-07

Can I trace a wire thur drywall with it

Posée par: Bulger
You can trace your wires pretty much through anything with this. I love this tester.
Répondue par: Anoble87
Date de publication: 2023-06-27

There?s NO way to turn off. Auto-Power Off: After 10 minutes of inactivity..what happens if it takes longer than 10 minutes to find a cable?

Posée par: Tomob
If you are actively using it, that keeps it on. If you set it down and do not handle it or have it connected, it auto cuts off after the prescribed time of inactivity of the device.
Répondue par: sredford
Date de publication: 2023-07-17

Can this be used to track wires underground? Or does Klein make a tool that does that? Thanks!

Posée par: UncleMatt
If you have a general idea of where each end of the cable or wire is located, this device will generate a tone signal underground. If you are attempting to locate underground wiring but are unaware of its path or destination, there are other products specifically made for this purpose.
Répondue par: Experienced With This Pro
Date de publication: 2023-05-07

Can this trace coax cable in yard?

Posée par: Jaym
It can’t be used to trace underground cables. 
Répondue par: Electrician 66
Date de publication: 2023-04-27

Will this work to test to see if the antenna cable on the roof that runs into the house down the wall to a wall connection has continuity. I'm trying to find out why my antenna is not working and need to verify it's not the cable.

Posée par: Karen
yes it will.
Répondue par: Kcrilly
Date de publication: 2023-05-07

Would this tool work in an automotive application? If I want to trace wiring behind trim panels or under carpet, in a bundle with 30-40 other wires, will I be able to trace to open circuits?

Posée par: Robcardie
The Tone and Probe kit can be used for automotive applications. Please contact Klein Tools Customer Service for assistance with your specific application.
Répondue par: Klein Tools
Date de publication: 2023-12-07

The wires can’t be live at all when using this toner? Working at a job that’s a complete mess and there’s no way of telling the wires apart. Whether it’s live or the circuit is off. Nothings labeled 

Posée par: Gre23
It works only on unlive wires.
Répondue par: Anthony
Date de publication: 2023-04-28
  • y_2024, m_7, d_19, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_41
  • loc_fr_CA, sid_1001632690, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 54ms
  • QUESTIONS, PRODUCT