Livraison gratuite de plus de 100 000 articles admissibles  En savoir plus

Aperçu

Modèle # 32807MAGSEN Internet # 1001331552

Sept tailles d'embout dans un seul outil! Toutes les tailles permettent un vissage facile à une seule main. Les formats sont interchangeables, ce qui vous assure d'avoir la grandeur dont vous avez besoin, quand vous en avez besoin. L'extrémité des tiges est chromocodée pour faciliter l'identification du format. Augmentez votre productivité et réduisez votre charge de travail avec ce tourne-écrous à embouts multiples.

  1. Sept tailles d'embout dans un seul outil pour un vissage facile à une seule main
  1. Puissants aimants à base de terres rares (1/4 po, 5/16 po, 11/32 po, 3/8 po, 1/2 po) pour maintenir solidement les écrous et les boulons en place
  1. Embouts avec ressort (7/16 po et 9/16 po) qui maintient solidement les écrous et les boulons en place sans aimant
  1. Tiges creuses (embouts de 1/4 po, 5/16 po, 3/8 po, 7/16 po et 9/16 po) pour visser des écrous sur de longs boulons ou de longues tiges filetées
  1. Manche et tiges robustes surpassant la performance de couple des tourne-écrous standard
  1. Poignée permettant l'utilisation d'une clé pour un couple supérieur lors des travaux exigeants

Spécifications

Dimensions

Hauteur assemblé (en pouces)
9.54
Hauteur de l’emballage (en pouces)
10.9
Largeur assemblée (en pouces)
1.42
Largeur de l’emballage (en pouces)
6
Poids assemblé (en livres)
1
Poids de l’emballage (en livres)
1.14
Profondeur assemblé (en pouces)
1.42
Profondeur de l’emballage (en pouces)
2

Détails

Article individuel, Ensemble
Article individuel
Caractéristiques
Porte-écrou, Magnétique, Isolé
Longueur de la queue (en po)
4
Longueur du manche (en po)
5.5
Longueur hors tout (en po)
9.54
Nombre de pièces dans lensemble
1
Pays d'origine
TW-Taiwan
Type de tête
Plusieurs embouts

Garanties et certifications

Ce produit est garanti sans défauts de matériau ou de fabrication pendant la durée de vie normale du produit. Si votre produit Klein nécessite des réparations ou si vous désirez obtenir des informations sur la façon de faire valoir vos droits en vertu des termes de la présente garantie, veuillez contacter Klein Tools au 1-800-553-4676.
Tourne-écrous 7en1Klein Tools Tourne-écrous 7en1Sept tailles d'embout dans un seul outil! Toutes les tailles permettent un vissage facile à une seule main. Les formats sont interchangeables, ce qui vous assure d'avoir la grandeur dont vous avez besoin, quand vous en avez besoin. L'extrémité des tiges est chromocodée pour faciliter l'identification du format. Augmentez votre productivité et réduisez votre charge de travail avec ce tourne-écrous à embouts multiples.
Klein Tools
1001331552
CAD41.992022-10-02
Home Depot Canada
Tourne-écrous 7en1 est évalué 4.5 de 5 de 378.
  • y_2022, m_9, d_30, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_52, tr_326
  • loc_fr_CA, sid_1001331552, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 72ms
  • REVIEWS, PRODUCT
Rated 4 de 5 de par This versatile nut driver is a solid tool to have in your toolbox. It is solidly built and has m... [This review was collected as part of a promotion.] This versatile nut driver is a solid tool to have in your toolbox. It is solidly built and has multiple common sizes to use. All the bits fit together nicely within each other for easy storage without losing any. It may take a few minutes to initially figure out how they fit together, but once you do it is easy to repeat time and again. The color coding on the shafts is helpful to remember because the laser etching of the sizes on the shiny shaft is hard to read. The rubber grip on the large handle is helps when you really need the extra grip. This product is made in Taiwan.
Date de publication: 2018-07-09
Rated 4 de 5 de par Handy as can be I work with a group of guys in a plant run E&i outfit. We discovered this tool by accident. Everyone was saying how heavy it is etc. but all of us now have one in our kits and are able to move from job to job without dragging an entire nut driver kit with us. It is super handy and the addition of the hex to help bust loose or tighten up those hard to move fasteners was a great design addition. Quality, durability, and performance are key with our guys and if the tools (yes even some of yours) are not up to those exacting standards, they either don’t get used or they fall into the murky depths of our collective shop tool box never to be seen again
Date de publication: 2022-04-09
Rated 1 de 5 de par 7-in-1 nut driver by Klein is a great concept, but it is not applicable in many situations. I ... 7-in-1 nut driver by Klein is a great concept, but it is not applicable in many situations. I forced myself to use this. Yet I found myself many times going back to the regular nut drivers. First of all it actually weighs more than a set of nut drivers by Klein or at least it feels like that. Many times I could not use it because the screws wouldn't go through the holes & two of the sizes. Are sockets & don't really work. I really like this concept but it just does not work for me. One handle with exchangeable nut driver shafts would work better. The trick is to lose weight or keep the tool the same weight. Without compromising, Thanx
Date de publication: 2019-03-28
Rated 4 de 5 de par Bulky and heavy, but it works. On a recent project I was able to screw tapcons into a wall, remov... [This review was collected as part of a promotion.] Bulky and heavy, but it works. On a recent project I was able to screw tapcons into a wall, remove the access panel on a range, and hook up the electrical cord using just this tool. The large handle gives a good grip, so I haven't had to use the bolster yet. I like how this tool includes the 11/32 that others skip---I come across that size pretty often. Although the tool is heavy and bulky, it is still smaller and lighter than having all different sizes on their own driver. It's main problem is that it's nesting design means that it can't fit into tight spaces. This problem can be eased buy using a 1/4 socket on the 1/4 drive par, but that negates the purpose of a all in one tool. A deep well socket gives even better reach. This is a good tool to throw in your tool bag, but it won't replace dedicated nut drivers.
Date de publication: 2018-07-11
Rated 5 de 5 de par Since 1979 I have come to depend on Klein Tools in one form or another. I have bought 3 nut drive... [This review was collected as part of a promotion.] Since 1979 I have come to depend on Klein Tools in one form or another. I have bought 3 nut driver sets in the past and my only problem with them is having somebody borrowing one and never returning it. Once again they have a new tool that saves space, does it job very well and will last for years to come. The materials used are top notch and even though the handle is larger than I am used to it is not over whelming. There is also 1/4” square head end (the 1/2” size attaches to it normally) can also be used to drive other sockets too (I have a 10 piece 1/4” drive MM socket set it works great with). Lastly the metal hex near the plastic handle works great to add additional torque when needed.
Date de publication: 2018-07-10
Rated 5 de 5 de par Very handy nut driver assortment that fits into my traveling tool kit perfectly. Replaced all of ... [This review was collected as part of a promotion.] Very handy nut driver assortment that fits into my traveling tool kit perfectly. Replaced all of my single nut drivers with one tool. This tool is not a light weight tool, the weight and heft really allows me to crank down on the fasteners with a much more secure grip compared too the single nut drivers. Must have for mobile tool kits or the Garage from Klein tools
Date de publication: 2018-06-27
Rated 5 de 5 de par [This review was collected as part of a promotion.] I use Klein products because they are made in USA and are well made and durability. You can ask any electrician what is the best made electrical tools they will say Klein! This 7 in 1 nut driver has it all. It has seven sizes; 1/4, 3/8, 9/16, 5/16, 7/16, 11/32 and ½ in earth magnets nut driver. It is color coded shaft ends to make it easy to identify the sizes. It has a heavy duty handle to help you torque the nuts. It also has a wrench assist on the handle to help added torque on the tougher jobs.
Date de publication: 2018-06-30
Rated 1 de 5 de par Most nut-drivers have hollow shafts so you can run the nut down unto a bolt this one does not so ... Most nut-drivers have hollow shafts so you can run the nut down unto a bolt this one does not so all it's good for is to start a nut on a bolt which is almost useless. i thought it was a nice concept but kind of useless unless your just starting a nut on a bolt.
Date de publication: 2018-10-04
  • y_2022, m_9, d_30, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_52, tr_326
  • loc_fr_CA, sid_1001331552, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 23ms
  • REVIEWS, PRODUCT

Is this tool made in America ?

Posée par: UnionMan
Yes, I believe all klein hand tools are made in the USA. But this tool specifically says on the package Made in the USA.
Répondue par: Phil
Date de publication: 2020-12-05

is this tool magnetic?

Posée par: jfellin
Yes, the Klein Tools 7-in-1 Multi-Nut Driver features strong rare earth magnets on the ¼”, 5/16”, 11/32”, 3/8”, and ½” sizes.
Répondue par: Klein Tools
Date de publication: 2019-11-03

can I get spare parts if I lose a piecerobert

can I get spare parts if I lose a piecerobert
Posée par: robert
Replacement parts for the Klein Tools 7-in-1 Heavy Duty Multi-Nut Driver are not available at this time.
Répondue par: Klein Tools
Date de publication: 2019-06-18

when are you going to have the metric version?

Posée par: Judd
The 7-in-1 Multi-Nut Driver is not available in metric at this time.
Répondue par: Klein Tools
Date de publication: 2022-06-17

How long is the handle alone with out the attachments??

Posée par: RHTA
The handle length is 6.25 in.
Répondue par: Klein Tools
Date de publication: 2022-05-19

Is this tool under the klein warranty i bought 6 motjs ago and it snapped on me

Posée par: Ed1019
For information on the warranty, please see the warranty document under Info & Guides or contact Klein Tools Customer Service 800-553-4676.
Répondue par: Klein Tools
Date de publication: 2022-04-08

Why is this shown as "assembled in USA" when it arrives without that statement, and says "made in taiwan" - I would not have bought this otherwise - I was looking for tools made in America!

Posée par: Dennis
I had the same question years ago on a product. It was assembled in the USA, yet made in China. The email I received from the US company stated the design was made in the US, they found a plant in China to make parts (Lower cost to make, lower labor) shipped the parts to the US, and paid employees to assemble the item. That’s exactly what it had on the box in big letters Assembled in the USA, and in small letters by the barcode it said made in china. I, myself was furious because I thought I was helping an American company by buying their product, which I thought it was 100% American made. 
Répondue par: Cprad007
Date de publication: 2022-02-04

Does it have hallow shafts

Posée par: Dan
Yes, the ¼”, 5/16”, 3/8”, 7/16”, and 9/16” sizes feature hollow shafts.
Répondue par: Klein Tools
Date de publication: 2021-06-14
  • y_2022, m_9, d_30, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_fr_CA, sid_1001331552, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 87ms
  • QUESTIONS, PRODUCT