• Panier
  • Legrand Wiremold Kit de cache cordons pour les systèmes audiovisuels domestiques blanc.

    Modèle nº C4050|Nº UGS 1000475511

    Aperçu
    Spécifications
    Évaluations

    Aperçu

    Modèle # C4050 Internet # 1000475511

    Dissimulent et organisent les câbles de votre système de cinéma à domicile. Les organiseurs de cordons CornerMate sont parfaits pour cacher dans les coins les cordons des appareils audio ou des systèmes de cinéma à domicile. Linstallation, en retirant la pellicule protectrice et en appuyant, est facile et rapide. Le couvercle sinverse pour que vous puissiez choisir entre un profil concave ou convexe. Peignez CornerMate pour quil sagence à vos murs. Conçu pour fonctionner avec les systèmes CableMate™ et CordMate<sup>®</sup> II afin dassurer la gestion complète de vos câbles.

    1. Kit contenant. 4 sections de 48 pouces de CordMate II, 3 sections de 48 pouces de CornerMate, 2 raccords de transition CordMate II et 2 couplages CordMate II.
    1. Peut être peint pour sagencer à votre décor.
    1. Dissimulent et organisent les câbles de votre système de cinéma à domicile.
    1. Linstallation, en retirant la pellicule protectrice et en appuyant, est facile et rapide.

    Spécifications

    Dimensions

    Hauteur assemblé
    51
    Hauteur de l’emballage (en pouces)
    51
    Largeur assemblée
    5
    Largeur de l’emballage (en pouces)
    5
    Poids assemblé
    2.75
    Poids de l’emballage (en livres)
    2.75
    Profondeur assemblé
    1.5
    Profondeur de l’emballage (en pouces)
    1.5

    Détails

    Certifié
    Oui
    Matériau
    Plastique
    Pays d'origine
    US-United States

    Garanties et certifications

    Pour obtenir de plus amples renseignements sur cette garantie, veuillez téléphoner au 1-800-723-5175.
    Kit de cache cordons pour les systèmes audiovisuels domestiques blanc.Photo of productDissimulent et organisent les câbles de votre système de cinéma à domicile. Les organiseurs de cordons CornerMate sont parfaits pour cacher dans les coins les cordons des appareils audio ou des systèmes de cinéma à domicile. Linstallation, en retirant la pellicule protectrice et en appuyant, est facile et rapide. Le couvercle sinverse pour que vous puissiez choisir entre un profil concave ou convexe. Peignez CornerMate pour quil sagence à vos murs. Conçu pour fonctionner avec les systèmes CableMate™ et CordMate<sup>®</sup> II afin dassurer la gestion complète de vos câbles.
    Legrand Wiremold
    1000475511
    Kit de cache cordons pour les systèmes audiovisuels domestiques blanc. est évalué 3.8 de 5 de 8.
    • y_2019, m_12, d_4, h_23
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_8
    • loc_fr_CA, sid_1000475511, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 58ms
    • REVIEWS, PRODUCT
    Rated 5 de 5 de par Great Great product and great customer service at home depot
    Date de publication: 2018-05-06
    Rated 4 de 5 de par Wire Management It does the job nicely. This is the second time buying it for another setup.
    Date de publication: 2016-10-11
    Rated 5 de 5 de par Worth every penny I live in an apartment and wanted to put a surround system in without drilling a lot of holes. the mix of flat and corner channels was what I needed, could have used 2more feet but this worked. I was able to put 2 speaker cables (14g) 2 cat5 cables and one coax cable through the flat channel - its a tight fit and took some fiddling but it works. There was room to spare in the corner channels. I've had the setup for 3years, adhesive is fine. About the best value out there for this much channeling.
    Date de publication: 2013-06-22
    Rated 4 de 5 de par Good wire management system Application: The wire mold cord management system was perfect for my application. I needed something removeable to hide my speaker cables. I actually only used 2-3 pieces. I fished the speaker cables behind some crown molding and it exited out at one corner. From there they cables went into the corner channel and out into a speaker connector terminal. I also had a flat channel piece that went behind my wall mounted tv to the entertainment system shelf. It was as good as I could have expected without going through drywall and drilling through studs. As far as fitment goes. I could barely fit 4 14 gauge in-wall speaker cables. In order for me to get the wire to exit the channel into the flat channel, I had to strip the "in-wall" jacket (the white jacket on the in-wall speaker cables) to get the flexibity and space to make a proper bend. The regular flat channels are also smaller than the corner channel so keep that in mind. I was actually able to fit the tv power cable, and hdmi cable and my center channel speaker cable through one of the flat covers. Unfortunately the flat channel doesn't fit directly with the wiremold receptacle box so there is a slight gap. Attaching to the wall: I first attached the corner piece using the double sided tape. Then I realized I had to remove it. It does a very good job at staying on (at least in my vertical application with the somewhat heavy speaker cable helping to hold it up). It took some careful prying to make sure it didn't peel off a layer of drywall/paint. I used drywall screws/anchors to reattach even though it had plenty of adhesiveness left. For the flat channels I used drywall screws instead of the adhesive as it was going on to a surface we just painted. Painting: I did not paint the channels. The white was clean enough for my application . Overall this is a great product. The quality is fine. It's somewhat flimsy and getting the wire in can be a pain but for a cord management system that you set once in a while it is fine. I could see some wear and tear if you are constantly opening/closing the channels. Space can be tight and you have to keep in mind that you'll need even more in order to get through some of the channel connectors.
    Date de publication: 2013-03-05
    Rated 3 de 5 de par Accessories kind of skimpy.. Not a bad option for organizing cords that may have to be later accessed. Adhesive backing sounds nice but typically wont last over a couple of years. Concern is for the quantity of connectors - there's none for the Cornermate(?), and they're not easy to find nor are they cheap!
    Date de publication: 2013-01-17
    Rated 4 de 5 de par It hids cords and snaps open and close to add more later I used this because the other wiremold products required fishing wire. It has an adhesive in the back, which over time will fail. To make this product usable, I ran it along a stud, drilled holes into it, and secured it by sinking in nails with a nail set. I later filled in the holes with spackle, and painted it the wall color. It was a pain to do this, but I know that the adhesive would fail in a few years, as it has with other wiremold products bought.
    Date de publication: 2012-09-30
    Rated 4 de 5 de par Worked as expected Pro: Easy to use and setup Cons: Could be more flexible to be able to move over trim
    Date de publication: 2012-02-08
    Rated 1 de 5 de par Get Something Else! Just got home and unpacked this thing they claim as a "kit" and I have to say there is nothing worse than getting back home only to realize that "everything needed to get the job done" is NOT included. The "corner" pieces are a joke and will require some sort of super glue to hold in place. For $30, save your money and get some cheap blow-molded plastic parts elsewhere!
    Date de publication: 2011-10-17
    • y_2019, m_12, d_4, h_23
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_8
    • loc_fr_CA, sid_1000475511, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 31ms
    • REVIEWS, PRODUCT

    Is the Wiremold 200 Wireway Electrical Code conforming (in Canada) for 120v lighting and receptacle circuits. That is CSA approved and Electrical Code

    Posée par: Anonyme
    This product is an unlisted cord cover. It is not intended to house hard wired electrical wiring. The intended use for this product is to conceal audio or home theater cords. The product has not been tested or evaluated as a surface raceway.
    Répondue par: LegrandSupport
    Date de publication: 2016-12-20
    • y_2019, m_12, d_4, h_23CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_1
    • loc_fr_CA, sid_1000475511, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 57ms
    • QUESTIONS, PRODUCT
    <?xml version="1.0" encoding="utf-8"?>