Le Vendredi fou du printemps des Pros est en cours. N’attendez pas!  Magasinez maintenant

Aperçu

Modèle # K2275-3 Internet # 1000521281

Le chariot de soudage Lincoln Electric d'une capacité de 80 livres offre un transport léger pour les soudeurs et des accessoires de soudage. Un accessoire parfait conçu pour les machines Weld Pak 140 HD ou Weld Pak 180 HD pour aider à garder votre zone de soudage organisée et propre.

  1. Le chariot robuste est conçu pour contenir une soudeuse, une bouteille de gaz de 80 pieds cubes et des câbles de soudage.
  1. Comprend une tablette supérieure inclinée pour un accès plus facile aux commandes de la soudeuse et un plateau inférieur pour le stockage.
  1. Comprend une poignée robuste et un cintre de fixation de câble pratique.
  1. Les roues de haute qualité roulent facilement.
  1. 80 livres de capacité.
  1. Construction métallique.

Spécifications

Dimensions

Hauteur assemblé (en pouces)
30
Hauteur de l’emballage (en pouces)
4.5
Largeur assemblée (en pouces)
38
Largeur de l’emballage (en pouces)
29
Poids assemblé (en livres)
27
Poids de l’emballage (en livres)
29
Profondeur assemblé (en pouces)
12.5
Profondeur de l’emballage (en pouces)
14.5

Détails

Pays d'origine
CA-canada
Type de produit
Accessoires

Garanties et certifications

1 an pour les défauts de fabrication
Chariot de soudageLincoln Electric Chariot de soudageLe chariot de soudage Lincoln Electric d'une capacité de 80 livres offre un transport léger pour les soudeurs et des accessoires de soudage. Un accessoire parfait conçu pour les machines Weld Pak 140 HD ou Weld Pak 180 HD pour aider à garder votre zone de soudage organisée et propre.
Lincoln Electric
1000521281
CAD187.992024-04-19
Home Depot Canada
Chariot de soudage est évalué 4.1 de 5 de 50.
  • y_2024, m_4, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_9, tr_41
  • loc_fr_CA, sid_1000521281, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 73ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Outstanding cart for a Lincoln SP-135T Just put this cart together this morning. It is perfect for the Lincoln SP-135T 110v MIG machine. The front bracket has holes that line up with existing sheet metal screws on the welder, so it's literally bolted to the cart. My waist high shielding gas bottle fits in nicely and it's trapped in place by tabs on the lower and by the hole in the upper deck and absolutely cannot fall over and no silly chain needed. Hung the leads with double sided velcro wrap from the handle. Boom. Awesome cart for a small welder.
Date de publication: 2015-12-27
Rated 5 de 5 de par Nice cart for the price. I purchased this cart for my Lincoln 180 HD weld pak, that I also purcha... Nice cart for the price. I purchased this cart for my Lincoln 180 HD weld pak, that I also purchased from Home Depot. The top is pre drilled to except the bolt hole pattern underneath the Lincon 180 HD, for a direct bolt on. Had no trouble assembling the cart. Also holds my smaller 150cu. inch cylinder on back end of cart. Have had this cart now for 6 years also, without a minutes trouble. Awesome for maneuvering the welding machine around my shop when welding on projects. Otherwise, you would be picking up and toting the welding machine and gas bottle every time you need to reposition yourself to the work. I will say for the price you can't beat this cart. Only reason I didn't give it a 5 star on quality, it is made out of a little thinner metal, and you can tell when maneuvering it around sometimes. But that does play into the overall price of it for sure, which helps keep the cost down. I could not imagine having the 180 HD weld pak, without this handy cart. Highly recommend this cart !!!!
Date de publication: 2019-04-12
Rated 1 de 5 de par to little for the money Cart is very small like working on ground. For the money i paid I thought I was getting a bigger cart. Have already bought a lot bigger cart that holds a full size bottle for a third less money. Costs too much to send back
Date de publication: 2012-01-17
Rated 3 de 5 de par Not bad for the price I bought this to hold my Lincoln 180C MIG welder, and for that purpose it's fine. It bolts up perfectly to the welder and provides a steady mount. On the other hand, the cart is made almost entirely from sheet metal and takes extra effort to assemble due to holes not lining up and tabs not being bent correctly. Like most things made of sheet metal, the holes and features aren't precisely where they're supposed to be particularly after bends are made. I also noticed the front of the bottom plate could be bolted to the vertical angled steel legs to provide a little more stability (drill two holes in each leg and add your own fasteners). The mount for the tank in the back isn't very good at all. Your tank is only held in place by three tabs in the bottom sheet metal plate. Since typical tanks have a rounded bottom they tend to jump and slide around and over the tabs. I'm probably going to weld a little more steel onto the tabs and add some material to make this a little better. The mounting location puts the tank in the middle of the cart and only an inch or so from the back of the welder, precisely where the gas line (that comes with the welder) leaves the back of the case. What a dumb design considering it's made to hold a Lincoln welder. I'm probably going to need a new hose with 90 degree fitting to remedy this interference issue. So, overall, three stars. Minus a star for the bad tank mount and location. And one more for requiring so much time to assemble. It's a decent cart, but it could be better with a few design tweaks. You're only getting your money's worth with this one and not much more than that.
Date de publication: 2014-12-31
Rated 4 de 5 de par Lincoln wire feed cart The lead time on this product was a bit long. The Lincoln welding cart is perfect for any Lincoln wire feed welder. It is also very stable with an 80 lb shielding gas tank on it.
Date de publication: 2014-03-11
Rated 2 de 5 de par Not a very stable unit, tighten the bolts to keep... Not a very stable unit, tighten the bolts to keep it from wobbling they start breaking, not bad for a $70 cart but was expecting a little more sturdy unit
Date de publication: 2019-08-28
Rated 4 de 5 de par Universal Welding Cart Two of the nuts and bolts were missing for assembly , my welder was a Hobart 140 so to secure the welder required the drilling of two additional holes in the adjustable bracket. The wheels are held in place with caps that are pressed on , at some point Im going to drill the axels and install cotter pins and washers that I feel over time will be less likely to come off. Once it’s put together it’s very solid and the paint on all the parts looks very well applied.
Date de publication: 2022-02-27
Rated 5 de 5 de par welder cart THE WELDING CART IS VERY STURDY,WHEELS ARE ALSO GOOD,THE CART FITS MY LINCOLN 180 AMP WELDER PERFECT,I RECOMMEND THIS CART
Date de publication: 2009-03-17
  • y_2024, m_4, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_9, tr_41
  • loc_fr_CA, sid_1000521281, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Does this fit the 180HD weld pak

Posée par: jason
Yes. Have had this cart for 6 years now. Mine was also pre drilled for the bolt hole pattern that is underneath the 180 HD also, for a direct bolt on. Highly recommend this cart!
Répondue par: rangermja
Date de publication: 2023-05-06

Will it fit both an argon and co2 tank?

Posée par: Supercheyman
Yes. The smaller 150cu. inch tank. And of course, only for 1 tank at a time. I have a straight Argon tank, and a uni mix tank of Argon & CO2. I just swap the tanks out from welding steel, to when I weld aluminum.
Répondue par: rangermja
Date de publication: 2023-05-06

Will this fit a 210MP ?

Posée par: Algernon
Yes the 210MP will fit on this cart. I have the same welder and cart and it fits. However, you will not be able to bolt/screw it down to the cart unless you modify the case of the welder as it does not have the screw holes. 
Répondue par: Brian
Date de publication: 2022-07-13

Does this cart work with the Lincon 140 Easy Mig welder?

Posée par: Anonyme
Yes, this cart will work with the Lincoln 140 Easy MIG welder. You can actually mount the 140 to the cart with the purchase of a few bolts/nuts from Home Depot. If you open up the door of your 140 welder you will notice a few pre-drilled holes. These holes should line up with holes that are pre-drilled into the cart. This cart will also work with most compact wire feed welders. This cart has a low profile and low centre of gravity. This minimizes any issues with the welder/cart tipping over that is typically found in other taller carts.
Répondue par: LincolnElectricExpert
Date de publication: 2013-10-23

Will this fit my Lincoln Electric Handy MIG Welder K2185-1?

Posée par: raymebaby
yes- it fits most lincoln wire feed welders
Répondue par: anchorboy
Date de publication: 2023-05-05

Does the le31 mp bolt to it?

Posée par: Charlie

What or the dimentions of this cart

What or the dimentions of this cart
Posée par: Emil

Where is it made?

Posée par: BC
  • y_2024, m_4, d_19, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_fr_CA, sid_1000521281, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 71ms
  • QUESTIONS, PRODUCT