Achetez en ligne et ramassez en magasin ou dans le stationnement  En savoir plus

Lutron Gradateur Skylark Contour LED+ pour ampoules à DEL/halo/incand, unipolaire/3 voies, amande

Modèle nº CTCL-153P-AL|Nº UGS 1001060268

Choisissez vos options

Aperçu

Modèle # CTCL-153P-AL Internet # 1001060268

Le gradateur Skylark Contour LED+ à glissière offre une gradation optimale de l'intensité lumineuse des ampoules à DEL. Ce gradateur fonctionne avec les ampoules à DEL à intensité variable jusqu'à un maximum de 150 W ou les ampoules incandescentes et halogènes jusqu'à un maximum de 600 W. Vous pouvez même mélanger les types d'ampoules, par exemple à DEL et halogènes, sur le même circuit. Le gradateur Contour est doté d'une glissière à bouton imperdable qui permet de régler aisément l'éclairage en fonction de vos besoins. Plaque murale Claro assortie vendue séparément.

  1. Testé sur des milliers d'ampoules et des dizaines de marques pour garantir une gradation sans vacillement
  1. Fonctionne avec les ampoules à DEL et fluocompactes à intensité variable jusqu'à un maximum de 150 W ou les ampoules incandescentes et halogènes jusqu'à un maximum de 600 W
  1. Technologie brevetée de Lutron qui optimise la plage de gradation de votre ampoule et empêche les interférences avec les autres gradateurs dans la maison
  1. Permet des installations unipolaires ou à trois voies, où les lumières sont contrôlées à partir d'un ou deux emplacements
  1. S'installe en aussi peu que 15 minutes dans les maisons de toutes époques AUCUN FIL NEUTRE REQUIS
  1. Comprend un gradateur Skylark Contour LED+ (anciennement C.L); plaque murale assortie vendue séparément

Spécifications

Dimensions

Hauteur assemblé (en pouces)
4.1
Hauteur de l’emballage (en pouces)
4.6
Largeur assemblée (en pouces)
2.1
Largeur de l’emballage (en pouces)
2.3
Poids assemblé (en livres)
0.1
Poids de l’emballage (en livres)
0.15
Profondeur assemblé (en pouces)
1.5
Profondeur de l’emballage (en pouces)
2.3

Détails

Ampoules compatibles
Del
Caractéristiques du commutateur
Programmable
Certifié
Couleur possible
Amande
Famille de couleurs
Beige et havane
Intensité du courant électrique (en ampères)
1.25
Intérieur/Extérieur
Pour l'intérieur
Matériau
Composite
Pays d'origine
MX-Mexico
Puissance (en W)
150
Quantité par paquet
1
Technologie Intelligente
Non
Tension (en V)
120
Type de commande
Multipoints
Type dinterrupteur
Plaques pour interrupteurs berceau
Utilisation
Pour l'intérieur

Garanties et certifications

1 an de garantie. Pour plus d'information S.V.P. appeler au 1-844-LUTRON1
Gradateur Skylark Contour LED+ pour ampoules à DEL/halo/incand, unipolaire/3 voies, amandeLutron Gradateur Skylark Contour LED+ pour ampoules à DEL/halo/incand, unipolaire/3 voies, amandeLe gradateur Skylark Contour LED+ à glissière offre une gradation optimale de l'intensité lumineuse des ampoules à DEL. Ce gradateur fonctionne avec les ampoules à DEL à intensité variable jusqu'à un maximum de 150 W ou les ampoules incandescentes et halogènes jusqu'à un maximum de 600 W. Vous pouvez même mélanger les types d'ampoules, par exemple à DEL et halogènes, sur le même circuit. Le gradateur Contour est doté d'une glissière à bouton imperdable qui permet de régler aisément l'éclairage en fonction de vos besoins. Plaque murale Claro assortie vendue séparément.
Lutron
1001060268
CAD33.782022-08-12
Home Depot Canada
Gradateur Skylark Contour LED+ pour ampoules à DEL/halo/incand, unipolaire/3 voies, amande est évalué 4.7 de 5 de 79.
  • y_2022, m_8, d_11, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_51, tr_28
  • loc_fr_CA, sid_1001060268, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 75ms
  • REVIEWS, PRODUCT
Rated 3 de 5 de par Maximum dimmer position does not give 100% light I just installed three of these dimmers. They are ok with the exception of one little problem: when the dimmer is on its top position to allow maximum light, it does not allow 100% of the current, so the light bulbs do not go 100% bright. We did not need to put any device to measure this because it is noticeable at bare eye. I just changed a 3-way one and a2-way one in the kitchen in the first floor and my wife noticed this issue right away. I installed a second one in the washroom upstairs and my son noticed too.
Date de publication: 2014-10-25
Rated 4 de 5 de par Great low dimming range! I installed four of these dimmers in my apartment. I use them to dim the lights after dusk (as recommended by sleep researchers to improve the quality of sleep). One of the dimmers is on a bare 100W bulb in a closet in my bedroom. For this one I adjusted the trim right down to the minimum dimming level. When I turn it on at minimum dimming I can only see the filament in the bulb glowing orange. At night it is just barely enough light to see what I am doing in the closet or in the small amount of light cast into the bedroom. But not enough to read anything or differentiate colors. It accomplishes exactly what I wanted. A couple of minor negatives though. The screw holes for the face plate are tapped into the aluminum cooling fins. I ended up stripping the threads in one of the holes. That was a pain. The other problem is one of the switches doesn't slide smoothly. It could be that I got a bit of drywall dust on it which is now interfering with the slider, but who knows.
Date de publication: 2017-08-26
Rated 5 de 5 de par Great dimmer switch!! Love that this dimmer switch has an On / Off button - very handy.
Date de publication: 2019-12-30
Rated 5 de 5 de par LED dimmer Easy to install, works great. I highly recommended this product.
Date de publication: 2019-11-16
Rated 5 de 5 de par Works with Dimmable LED Pot Lights Worked with dimmable LED Pot Lights, doesn't flicker anymore
Date de publication: 2020-01-09
Rated 5 de 5 de par Bon produit! Acheté pour rénovations. Fonctionne très bien avec tout
Date de publication: 2018-01-02
Rated 5 de 5 de par Works Great I installed this dimmer after I installed a new 100 watt (rated) dimmable CREE LED bulb that replaced a non-dimmable Westinghouse 100 watt (rated) CFL bulb in my living room lamp. It was a simple 2 wire hookup and installed in less than 30 minutes. It works perfectly, no flickering or loss of light output. In my experience, this type of installation sometimes runs into all kinds of problems, but this one was a breeze! I don't know how it performs with a common incandescent lamp, but I am very happy with my choices. One note: the installation instruction diagrams ARE NOT like the actual dimmer switch. The diagram appears to show the wires installed in the side of the switch, when in fact they are installed on the bottom rear. Use the RED (hot) 600VAC wire and BLACK (common) to make your two wire connection. Of course green is ALWAYS ground, if needed.
Date de publication: 2015-12-02
Rated 5 de 5 de par Great dimmer This was so easy to install took me 5 minutes to wire up. If needed there is a great how to video in the instructions. The maximum dim control is a great option because you can set it so it will only go as low as you want or all the way dim. You have to set this option before you put the wall plate back on. The slider will work but it will only dim as far as you set it.
Date de publication: 2022-01-10
  • y_2022, m_8, d_11, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_51, tr_28
  • loc_fr_CA, sid_1001060268, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 52ms
  • REVIEWS, PRODUCT

Would this dimmer switch be considered a 0 - 10 Volt, Low Voltage Dimmer? And if not, do you h...

Would this dimmer switch be considered a 0 - 10 Volt, Low Voltage Dimmer? And if not, do you have the same style dimmer that could be used where a 0 - 10 Volt, low voltage dimmer is recommended?
Posée par: Mikey
It would be best to contact the manufacture but I really don'r think it would work with a low voltage system.
Répondue par: JAMES
Date de publication: 2022-04-05

Install was easy. But when I put dimmer on its lowest setting, then later turn switch off it does not turn light back on to my last setting. I have to slide dimmer up and then back down again. It remembers brighter settings but not lowest setting. 

Posée par: Bobbs
This is a common issue with dimming LEDs. I have multiple different brands of LEDs in my home, and if you have the dimmer set too low (read step 7 https://www.lutron.com/TechnicalDocumentLibrary/0301882.pdf) then what you experienced will happen. Play around with that dial setting to find the stable minimum setting which allows the light to turn on and off without sliding the dimmer handle.
Répondue par: Drew
Date de publication: 2021-05-05

The slider is a bit clicky sometimes when sliding up and down - normal?

Posée par: smarshey
Thank you for your inquiry. Please reach out to our Support Team at support@Lutron.com or by phone at 1 (844) 588-7661 for additional assistance.
Répondue par: lutron
Date de publication: 2020-11-23

I recently had led lights installed in my living room, when I dim them 50% I hear buzzing , will this dimmer fix that problem or I need ELV dimmer ? Thanks 

Posée par: Tazz
The simple question - were the LED lights that you bought dimmable as many are not dimmable.
Répondue par: Mattie
Date de publication: 2021-02-07

Is it possible to use 2 such dimmers in a single 3 way group?

Posée par: Alex
Lutron does not recommend using two CTCL-153P dimmers on a 3-way lighting circui.t This will cause performance issues with the controls and lighting. One location must remain a standard 3-way mechanical on/off switch when using this dimmer. Instead, Lutron would recommend using the MACL-153M and companion dimmer MA-R for multi-location dimming.
Répondue par: Lutron
Date de publication: 2020-02-29

Would like a Skylark Contour C.L Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, ...

Would like a Skylark Contour C.L Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole, Almond but need it to run two 32" fans. This one says "for one fan". What is the reason it can only controlling one fan? Is there a model out there that can control two fans.
Posée par: BJ
The only fan control Lutron would offer which can control two ceiling fans would be the MA-FQ4FM-AL. An additional canopy module would need to be ordered for the second fan (model: CM-FQ1). Please see www.lutron.com/support for installation guides and specifications.
Répondue par: Lutron
Date de publication: 2018-06-25

is it available in store newark delaware

Posée par: melissa
Thank you for your recent inquiry with The Home Depot, Melissa. This dimmer is only available online and is not sold in Home Depot Stores. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Répondue par: THDSupport
Date de publication: 2016-01-18
  • y_2022, m_8, d_10, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_fr_CA, sid_1001060268, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 86ms
  • QUESTIONS, PRODUCT