Achetez en ligne et ramassez en magasin ou dans le stationnement  En savoir plus

Lutron Gradateur Skylark Contour LED+ pour ampoules à DEL/halo/incand, unipolaire/3 voies, blanc

Modèle nº CTCL-153PDH-WH-C|Nº UGS 1000686637

Choisissez vos options

Aperçu

Modèle # CTCL-153PDH-WH-C Internet # 1000686637

Le gradateur Skylark Contour LED+ à glissière offre une gradation optimale de l'intensité lumineuse des ampoules à DEL. Ce gradateur fonctionne avec les ampoules à DEL à intensité variable jusqu'à un maximum de 150 W ou les ampoules incandescentes et halogènes jusqu'à un maximum de 600 W. Vous pouvez même mélanger les types d'ampoules, par exemple à DEL et halogènes, sur le même circuit. Le gradateur Contour est doté d'une glissière à bouton imperdable qui permet de régler aisément l'éclairage en fonction de vos besoins. Plaque murale Claro assortie vendue séparément.

  1. Testé sur des milliers d'ampoules et des dizaines de marques pour garantir une gradation sans vacillement
  1. Fonctionne avec les ampoules à DEL et fluocompactes à intensité variable jusqu'à un maximum de 150 W ou les ampoules incandescentes et halogènes jusqu'à un maximum de 600 W
  1. Technologie brevetée de Lutron qui optimise la plage de gradation de votre ampoule et empêche les interférences avec les autres gradateurs dans la maison
  1. Permet des installations unipolaires ou à trois voies, où les lumières sont contrôlées à partir d'un ou deux emplacements
  1. S'installe en aussi peu que 15 minutes dans les maisons de toutes époques AUCUN FIL NEUTRE REQUIS
  1. Comprend un gradateur Skylark Contour LED+ (anciennement C.L); plaque murale assortie vendue séparément

Spécifications

Dimensions

Hauteur assemblé (en pouces)
5.8
Hauteur de l’emballage (en pouces)
1.58
Largeur assemblée (en pouces)
4
Largeur de l’emballage (en pouces)
8.2
Poids assemblé (en livres)
0.26
Poids de l’emballage (en livres)
2.22
Profondeur assemblé (en pouces)
2.4
Profondeur de l’emballage (en pouces)
8.27

Détails

Ampoules compatibles
Del
Certifié
Couleur possible
Blanc
Famille de couleurs
Blanc
Intérieur/Extérieur
Pour l'intérieur
Matériau
Plastique
Pays d'origine
CN-China
Puissance (en W)
150
Quantité par paquet
1
Technologie Intelligente
Non
Tension (en V)
120
Type de commande
Multipoints
Type dinterrupteur
Plaques pour interrupteurs berceau
Utilisation
Pour l'intérieur

Garanties et certifications

Une année. 1-800-523-9466.
Gradateur Skylark Contour LED+ pour ampoules à DEL/halo/incand, unipolaire/3 voies, blancLutron Gradateur Skylark Contour LED+ pour ampoules à DEL/halo/incand, unipolaire/3 voies, blancLe gradateur Skylark Contour LED+ à glissière offre une gradation optimale de l'intensité lumineuse des ampoules à DEL. Ce gradateur fonctionne avec les ampoules à DEL à intensité variable jusqu'à un maximum de 150 W ou les ampoules incandescentes et halogènes jusqu'à un maximum de 600 W. Vous pouvez même mélanger les types d'ampoules, par exemple à DEL et halogènes, sur le même circuit. Le gradateur Contour est doté d'une glissière à bouton imperdable qui permet de régler aisément l'éclairage en fonction de vos besoins. Plaque murale Claro assortie vendue séparément.
Lutron
1000686637
CAD27.982022-08-15
Home Depot Canada
Gradateur Skylark Contour LED+ pour ampoules à DEL/halo/incand, unipolaire/3 voies, blanc est évalué 4.5 de 5 de 1199.
  • y_2022, m_8, d_14, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_133, tr_1066
  • loc_fr_CA, sid_1000686637, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 77ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par Not compatible with Philips Ambien LED MR16 When first used with this dimmer at any setting but full-on, these lights flicker and then sometimes change to about 3/4 on no matter then dimmer setting. This was with 2 tracks of 3 lamp fixtures connected. Disconnecting one or the other of the tracks gave better performance. The Philips lamps are rated 10 watts, and the dimmer is rated up to 150 watts for LED lamps, so it's odd it can't handle these two tracks at once well. Even odder, after reconnecting both tracks, the dimmer seems more stable, but will intermittently be at one of two significantly different brightness near the bottom of the slider range. The particular MR16 lamp can be found by entering 046677414962 in the search field at HomeDepot dot com. The track unit is 008938246682.
Date de publication: 2011-08-12
Rated 5 de 5 de par Looks Good & Works Flawlessly First of all, I checked the Lutron website and confirmed that my LED lamps were compatible with this dimmer. I purchased the dimmer at our local Home Depot, which had a nice display with the various Lutron products (I originally went in the store and was going to buy the Lutron Maestro but the Skylark worked out better for my needs). I installed the dimmer, which took all of about 5 minutes, and Yes you must turn off the the circuit breaker to avoid damaging the dimmer switch. And now my LED lamps are working GREAT, they dim very low with the slide all the way down. Absolutely No Flickering, No Humming/Buzzing. Very Happy with this purchase. My LED lights are Feit brand, BR30 style.
Date de publication: 2015-11-10
Rated 2 de 5 de par Wall switch dimmer for LED down lights This dimmer control needs more refined electrical engineering. We are using it to control four, 14watt retrofit LED down lights, recessed in our bathroom ceiling. At full brightness, they are brighter than the 85w reflector incandescent bulbs they replaced and we're very happy with the new lights. The problem shows up as annoying light flickering in random dimming positions. Instructions in the dimmer package instruct you adjust a small lever, on the dimmer body, to eliminate any flickering. Doesn't work well enough. You just have to avoid some dimming levels.
Date de publication: 2014-10-07
Rated 5 de 5 de par Lutron Skylark Contour C L Dimmer Replaced old dimmers with 3 new Lutron Skylark Contoour C-L dimmers due to upgrading high hat lights from incandecent to new energy efficient Cree LED inserts sold by Home Depot. The new Lutron dimmer works with dimmable LED's/CFLs and should save money and pay for themselves due to the new LED's which use significantly less energy. These dimmers also have an additional adjustment feature to futher control the light brightness level by the slide switch. Well designed to be used as either a single pole or 3-way light switch. The instructions made installation easy.
Date de publication: 2016-10-04
Rated 3 de 5 de par Maximum dimmer position does not give 100% light I just installed three of these dimmers. They are ok with the exception of one little problem: when the dimmer is on its top position to allow maximum light, it does not allow 100% of the current, so the light bulbs do not go 100% bright. We did not need to put any device to measure this because it is noticeable at bare eye. I just changed a 3-way one and a2-way one in the kitchen in the first floor and my wife noticed this issue right away. I installed a second one in the washroom upstairs and my son noticed too.
Date de publication: 2014-10-25
Rated 4 de 5 de par Good quality product I bought this because my old dimmer wasn't compatible with the LED recessed lights I purchased. Dimmer works great and easy to install. Only 2 wires plus the ground. There's an additional red wire that I believe is for a 3 way switch. The dimmer has a dial (hidden when the face plate is attached) that allows you to adjust the minimum brightness. This alleviates low-light flickering and allows the installer to preset the minimum brightness level. Very cool feature and one I wasn't expecting. I think it's priced a little too high for the simple look it provides. Other dimmers (the non LED ones) look better and are the same price as this one. Instead of almost 23 dollars, I think 18 would be a better fit.
Date de publication: 2011-09-23
Rated 4 de 5 de par It's just a dimmer switch I needed a dimmer switch for an office reception area, we had more lighting installed and it was a bit brighter than expected. While the added brightness was okay, we decided to put some control to it so the times when all the brightness wasn't needed we could 'dim' the light given by the new lights. The solution was naturally a dimmer switch, it installed easily and does what it was intended, dims and brightens at the 'slide of a switch', and there's a flip of the switch available when we want to turn off the lights w/o moving the dim slider from it's desired set position. The dimmer switch did the trick, but then, it's just a dimmer switch.
Date de publication: 2015-02-17
Rated 5 de 5 de par Works as advertised, great value! I purchased 2 of these dimmers and have each controlling 6 Ecosmart 6" LED retrofits ECO-575L. I am extremely happy with their performance and can honestly say that it is a good product. Like another reviewer said, there is an adjustment wheel, and it all depends on the dimming ability of your bulbs.
Date de publication: 2012-03-28
  • y_2022, m_8, d_14, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_133, tr_1066
  • loc_fr_CA, sid_1000686637, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • REVIEWS, PRODUCT

I have 16 six (6) in. LED canless lights in series tied to a lutron dimmer switch on a 20 amp circuit however the lutron switch is humming/buzzing. I replaced the switch but it is still humming/buzzing. Does anyone know what the issue could be?

Posée par: Kyle
Am no expert, but think the type of bulb may be the issue, Brand compatibility matters. I have buzzing with the dimmer on my 6 Feit electric LEDs in cans. Only buzzes when dimmed. Have another dimmer on a circuit for a kitchen chandelier fixture, 6 LED candle type bulbs. Never buzzing on that one.  Check online to verify compatibility of the bulb with the dimmer. 
Répondue par: Joyce
Date de publication: 2022-08-06

I have a room in which one switch controls the areas lights and other switch controls the hallway lights (same panel/ 2 light switches). Am I understanding this will allow one of the areas to dimmed (assuming proper bulbs) and other will not only onoff?

Posée par: Bobvilla
Yes
Répondue par: Max K
Date de publication: 2022-07-03

Will this work with a HALO 6 inch direst ceiling mount LCR6219FSE010MV

Posée par: Portagie68
Currently, there's no industry standard or regulation for manufacturing LEDs, which is why performance varies with dimming controls. That's why we extensively test a variety of LEDs from many different manufacturers, and offer a mobile-friendly web tool to help you select bulbs that provide the best dimming performance with your Lutron dimmers. To access the tool, please visit lutron.com/ledfinder. If you have additional questions, please reach out to our Support Team at support@lutron.com or give us a call at 1-844-LUTRON1.
Répondue par: lutron
Date de publication: 2022-07-08

Can you put (3) of these in the same gang box? I for garage light, 1 for porch lights and 1 for door light. Is it too much heat?

Posée par: JamieC
Yes, these controls can be ganged together but the metal fins on the side will need to removed. Removing the fins on the side lowers the maximum wattage the dimmer can handle if using incandescent/halogen bulbs. Please refer to the install guide for the wattage information, or give us a call at anytime 888-588-7661.
Répondue par: lutron
Date de publication: 2022-04-04

Can i run this switch for the recessed lights, and run a second switch for a ceiling fan in the same a 2 gang box?

Posée par: AndyG
Yes. That should be possible if you have the two gang box.
Répondue par: Nicholas
Date de publication: 2022-03-15

I patched a drywall right above this switch. A lot of dust got on the switch. Now the dimmer gets stuck and doesn't slide smoothly. Is there anyway to fix this?

Posée par: Bennyboy
You could try blowing it out using a can of compressed air. It's made to clean electronic equipment and would be safe for this. Good luck.
Répondue par: Fred
Date de publication: 2022-03-05

Can this be used to replace a 4-way switch in a system needing 3 switches?

Posée par: Anon
The CTCL-153P can be used in a existing 4 way application (3 switches controlling 1 light) however, it can only be installed at one of the 3 way locations. Only one dimmer will be installed in this circuit, the other devices will be the existing 3-way and 4 way switches.
Répondue par: lutron
Date de publication: 2022-02-01

does this dimmer work with Alexa?

Posée par: Norm
No. No Wi-Fi connectivity
Répondue par: Filzbert
Date de publication: 2022-01-20
  • y_2022, m_8, d_14, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_77
  • loc_fr_CA, sid_1000686637, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 87ms
  • QUESTIONS, PRODUCT