Liste d'entretien hivernal de la maison.  Magasiner les articles de l’événement!

Aperçu

Modèle # EPRI10003080/LB Internet # 1000755386

Cette porte cadre en apprêt blanc avec verre laminé blanc maximise bien la lumière naturelle. Offrant un degré d'intimité élevé, le verre laminé blanc est une alternative polyvalente à la porte à panneaux. Ce modèle de conception moderne s'agence à plusieurs styles de décoration et peut être installé dans toutes les pièces de votre maison. Les portes Milette sont fièrement fabriquées au Canada depuis plus de 50 ans. Nous utilisons que du bois de première qualité provenant de ressources durables

  1. Profil colonial
  1. Prête à peindre
  1. Porte seule, vous permet d'usinée le trou de poignée et l'emplacement des charnières à la hauteur désirée.
  1. Porte en bois avec placage. Possibilité de coupe sur hauteur: 2 1/4 po et largeur: 5/16 po
  1. Plusieurs autres essences, dimensions et options disponibles en commande spéciale. Voir détails en magasin
  1. Certifié LEED v4

Spécifications


Fini

Apprêt


Type dâme

MDF à âme pleine


Type de verre

stratifié


Style principle

Moderne/Contemporain


Taille de la porte L x H (po)

30 x 80

Dimensions

Hauteur assemblé (en pouces)
80
Hauteur de l’emballage (en pouces)
80
Largeur assemblée (en pouces)
30
Largeur de l’emballage (en pouces)
30
Poids assemblé (en livres)
43.74
Poids de l’emballage (en livres)
43.74
Profondeur assemblé (en pouces)
1.38
Profondeur de l’emballage (en pouces)
1.38

Détails

Caractéristiques
Ajustable, Verre trempé
Couleur
Blanc
Couleur possible
Blanc
Côté douverture de la porte
Ouverture universelle ou réversible
Design sur verre
Maroc
Fini
Apprêt
Matériau
MDF
Nombre de carreaux
1-Lite
Pays d'origine
CA-Canada
Quantité
1
Style principle
Moderne/Contemporain
Taille de la porte L x H (po)
30 x 80
Type de trou
Aucun trou
Type de verre
stratifié
Type dâme
MDF à âme pleine

Garanties et certifications

Garantie 1 an. Pour information, contactez notre service à la clientèle au 1-800-567-2931
30x80 Porte de style Art Déco 1 verre Laminé Blanc en Apprêt blancMilette 30x80 Porte de style Art Déco 1 verre Laminé Blanc en Apprêt blancCette porte cadre en apprêt blanc avec verre laminé blanc maximise bien la lumière naturelle. Offrant un degré d'intimité élevé, le verre laminé blanc est une alternative polyvalente à la porte à panneaux. Ce modèle de conception moderne s'agence à plusieurs styles de décoration et peut être installé dans toutes les pièces de votre maison. Les portes Milette sont fièrement fabriquées au Canada depuis plus de 50 ans. Nous utilisons que du bois de première qualité provenant de ressources durables
Milette
1000755386
30x80 Porte de style Art Déco 1 verre Laminé Blanc en Apprêt blanc est évalué 4.5 de 5 de 77.
  • y_2023, m_12, d_7, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_40, tr_37
  • loc_fr_CA, sid_1000755386, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 75ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Beautiful and easy peasy Doors look great in my application as pocket doors to bathrooms. After reading the negative comments about the challenge of removing the protective film, I watched the company's you tube video on how to remove the film. As my doors were hanging I simply started the removal by pulling the film from the bottom up and towards myself and then rolled the film up and back towards the door capturing the majority of the flakes inside the film as I rolled. Once completely removed I used my vacuum with the soft brush attachment to vacuum any pieces still held by static to the door and any pieces that had fallen to the floor. Very happy with my purchase.
Date de publication: 2020-02-01
Rated 5 de 5 de par I really like my doors I liked the the protective cover on the the glass. They were so easy to paint. It was a bit messy to remove but there was no paint to scrap off the glass. I would recommend these doors.
Date de publication: 2017-01-03
Rated 5 de 5 de par Great doors. Great product, solid construction with reasonable room top and bottom for trimming to size. I didn’t have any of the previously-mentioned issues with the opacity of the glass in the seven doors we installed. Best to take your time and work the doors outside, especially when removing the masking on the glass. One thing we noticed was that rolling or spraying a layer of paint onto the masking while painting the doors seals the primer onto it and eliminates the flaking of the factory primer when removing the masking, saving a bit of workspace cleanup.
Date de publication: 2020-10-08
Rated 4 de 5 de par The Door I love BUT.... I purchased 3 of these doors and had them professionally installed. They are a very nice interior door. The privacy glass is perfect you cannot see into the rooms. The problem I have an the frustration as I still have specs of white primer on me. Is the primer was sprayed over the protective plastic on the glass and no matter how you attempt to take it off its a MESS. Its all over my house now and hard to suck up with the vacuum as it also sticks to my flooring. Will take alot of time to clean up,
Date de publication: 2018-04-13
Rated 4 de 5 de par No mess for us We removed the plastic coating prior to installation of door after reading all the comments about the big mess. We laid the door horizontally and removed one side at at time rolling the flaking primer up in the plastic as it was rolled back. Very tidy. Too soon to tell how happy we are with the door, its not installed yet, but so far, its all good.
Date de publication: 2018-11-25
Rated 1 de 5 de par Unless you like a huge mess don't but these. The door is nice however they have a protective coating on the glass which you have to peel off. The plastic is hard to get to (or at least it was on my set) and I had to scrape a corner to try and get to the plastic so I could peel it off. Then the fun began! Since they sprayed the primer over the film, every time you pulled a piece of the plastic off a million pieces of shards of paint fell on the floor. The plastic was on very tight almost like the tightest face mask you could imagine. I would not buy these again as it was very frustrating to take off and made the biggest mess. I bought another set of doors (different brand) and they had clear plastic with not paint that peeled off very easily.
Date de publication: 2023-01-16
Rated 4 de 5 de par ~ Pre-primed and pre-masked is nice. However, the masking (cling film) goes behind the millwork. You can't get all the plastic out, all you can do is use a sharp knife to cut around the perimeter and peel off the visible part. As you peel, the primer on the masking will flake off. It will make millions of tiny fiber shaped flakes that stick to everything.
Date de publication: 2018-12-31
Rated 2 de 5 de par Poor quality control The protective coating on the glass has a layer of primer on it, so when you remove it your left with an unbelievable mess of small tiny paint particles to clean up. Factory needs to fix this .... Very disappointed with this door.
Date de publication: 2016-10-19
  • y_2023, m_12, d_7, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_40, tr_37
  • loc_fr_CA, sid_1000755386, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 55ms
  • REVIEWS, PRODUCT

What is the best way to remove the protective coating on the glass?

Posée par: Patrick
Patrick, Thank you for your inquiry. Once the door has dried from painting, cut along the protective plastic around the perimeter of glass with a sharp utility knife. To remove plastic, place a straight smooth edge against the glass, peel off one corner and pull plastic towards you. Repeat this step on opposite side of glass. You can also view our pro tips video by consulting the link below: https://www.portesmilette.com/en/pro-tips/removing-plastic-film Thank you for choosing Milette Doors. -The Milette Doors Team
Répondue par: Product Expert
Date de publication: 2021-08-26

Does Home Depot cut the hinge grooves and door handle out?

Posée par: DaveV
Hello DaveV, Milette does offer this service through our Special Order program. We will machine to your specified hinge and handle hole locations. Please ask an associate for more details. Thank you, The Milette Doors Team
Répondue par: Product Expert
Date de publication: 2022-09-26

Can you describe laminated glass? Does it have a film applied to the glass or is it a quality of the glass itself?

Posée par: Anne
The glass comes with a plastic applied to both sides to protect the glass. 
Répondue par: Changes
Date de publication: 2022-09-06

Hello, Can I cut the door 1 inch from sides. Standard size is 28" but I need a door in 26" width. Thanks

Posée par: Kamal
Hello Kamal, Our manufacturers' maximum trimming allowances for width is a total of 5/16". Milette Doors has a special order program available in store where you can order this door in a 26" width, with any prehanging options as well as factory finishing. If we can be of any additional assistance please do not hesitate to contact us at info@portesmilette.com or by phone at 1-800-567-2391 M-F 8AM-4PM EST. -The Milette Doors Team
Répondue par: Product Expert
Date de publication: 2022-07-28

Can i use 2 of those for french doors in the entrance vestibule?

Posée par: HHHGG
We used 2 doors side by side for a closet in an office. Worked well.
Répondue par: Saltspringreno
Date de publication: 2023-09-22

I'd like to cut 3" off the length of the door. Is that possible?

Posée par: Jeff
Bonjour , thanks for taking the time to write to us. In regards to your question , the maximum you can cut on our doors is 2 1/4'' total 1 3/4" from bottom and 1/2'' from the top. If you have any other questions , it will be a pleasure to assist you.
Répondue par: Product Expert
Date de publication: 2021-06-03

I purchased two of the 30" x80" doors for my bathrooms. (1) Does anyone know what's the best hinge mortise jig for cutting the hinges? I was looking at the Ryobi jig - and (2) Should I use three hinges or can I get away with two?

Posée par: elrep
Hello elrep, Milette's standard hinge machining is for a quantity of 3 hinges. We invite you to visit our machining specifications info sheet at the following link: https://www.portesmilette.com/Content/Documents/en/OptionsDispo/Specifications_133.pdf Should you have any further questions please do not hesitate to connect with us at info@portesmilette.com or at 1-800-567-2931 M-F 8AM to 4PM EST. Thank you, The Milette Doors Team
Répondue par: Product Expert
Date de publication: 2023-02-22

Do these doors come with clear glass instead of privacy glass?

Posée par: D door guy
Hello D door guy, Yes, this door model is available with clear glass as part of our special order program. Please speak with an associate to obtain a quote. Should you have any further questions don't hesitate to connect with us via email at info@portesmilette.com or calling 1-800-567-2937 M-F 8AM-4PM EST. Thank you, The Milette Doors Team
Répondue par: Product Expert
Date de publication: 2022-11-14
  • y_2023, m_12, d_7, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_fr_CA, sid_1000755386, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 81ms
  • QUESTIONS, PRODUCT