L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # 49-56-9637 Internet # 1001179599

Fabriquée aux Etats-Unis, la scie à trous de Milwaukee Hole Dozer est équipée du Rip Guard, la forme de dent la plus résistante de l'industrie, soutenue par la garantie à vie limitée contre le bris de dents du Rip Guard. Chaque dent est fabriquée avec plus d'acier derrière le bord de coupe pour une plus grande résistance. La garantie Rip Guard sur les casses de dents est une première dans l'industrie des scies cloche. La résistance accrue des dents et les 8 % de cobalt donnent plus de vie aux dents, ce qui permet d'augmenter la productivité sur le chantier et de maintenir la qualité des trous. Le Hole Dozer comprend un Plug Jack, une fente d'accès qui permet un accès complet pendant le retrait du bouchon. Le Plug Jack donne un accès plus bas dans le godet pour les matériaux épais et plus haut vers les dents pour les matériaux fins. Grâce à ses multiples positions permettant d'exercer un effet de levier et à un meilleur accès au bouchon, le Plug Jack augmente la productivité et élimine les temps d'arrêt perdus entre les trous. Pour un changement rapide et sans outil, utilisez les porte-outils universels à changement rapide de Milwaukee. 49-56-7210, 49-56-7240, 49-56-7250 et 49-56-9100.

  1. Durable construction bi-métal possède 8% de cobalt pour une résistance accrue à l'usure
  1. dents en acier renforcé sont couverts par une garantie à vie limitée Rip garde contre la casse
  1. Façonnée avec des fentes diagonales de vérins de bouchon tout d'accès pour l'enlèvement rapide de matériau branché
  1. Utiliser séparément vendus Milwaukee tonnelles changement rapide (modèles 49-56-7210, 49-56-7240, 49-56-7250, 49-56-9100)
  1. Comprend : (1) (1) Scie cloche bi-métallique Dozer à trou de 3 pouces

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1.9
Hauteur de l’emballage (en pouces)
2.63
Largeur assemblée (en pouces)
3
Largeur de l’emballage (en pouces)
1.9
Poids assemblé (en livres)
0.52
Poids de l’emballage (en livres)
0.43
Profondeur assemblé (en pouces)
3
Profondeur de l’emballage (en pouces)
2.63

Détails

Arbre inclus
Non
Article individuel, Ensemble
Article individuel
Caractéristiques des accessoires pour outils à moteur
Universel
Diamètre de la mèche (en po)
3
Idéalement utilisé avec
Scies circulaires
Longueur de la mèche (en po)
1-5/8
Matériau de la mèche
Bimétal
Matériau de la pointe
Bimétal
Matériau utilisable
Acier
Nombre de pièces dans l'ensemble
1
Pays d'origine
US-United States
Type d'accessoire pour outils à moteur
Scies-cloches et accessoires
Type de mèche
Scies-cloches
Type de tige
Hex
Utilisation
Plastiques et composites, Bois, Bois incrusté de clous, Métal

Garanties et certifications

Rip Guard Garantie limitée à vie sur le bris des dents. Pour plus d'informations, veuillez appeler le 1-877-948-2360.
3 pouces. Scie cloche bimétallique pour bouteur à trousMilwaukee Tool 3 pouces. Scie cloche bimétallique pour bouteur à trousFabriquée aux Etats-Unis, la scie à trous de Milwaukee Hole Dozer est équipée du Rip Guard, la forme de dent la plus résistante de l'industrie, soutenue par la garantie à vie limitée contre le bris de dents du Rip Guard. Chaque dent est fabriquée avec plus d'acier derrière le bord de coupe pour une plus grande résistance. La garantie Rip Guard sur les casses de dents est une première dans l'industrie des scies cloche. La résistance accrue des dents et les 8 % de cobalt donnent plus de vie aux dents, ce qui permet d'augmenter la productivité sur le chantier et de maintenir la qualité des trous. Le Hole Dozer comprend un Plug Jack, une fente d'accès qui permet un accès complet pendant le retrait du bouchon. Le Plug Jack donne un accès plus bas dans le godet pour les matériaux épais et plus haut vers les dents pour les matériaux fins. Grâce à ses multiples positions permettant d'exercer un effet de levier et à un meilleur accès au bouchon, le Plug Jack augmente la productivité et élimine les temps d'arrêt perdus entre les trous. Pour un changement rapide et sans outil, utilisez les porte-outils universels à changement rapide de Milwaukee. 49-56-7210, 49-56-7240, 49-56-7250 et 49-56-9100.
Milwaukee Tool
1001179599
3 pouces. Scie cloche bimétallique pour bouteur à trous est évalué 4.7 de 5 de 409.
  • y_2024, m_2, d_24, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_24, tr_385
  • loc_fr_CA, sid_1001179599, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 72ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par Game-Changer: HOLE DOZER™ Hole Saw Bi-Metal Cups Precision and Durability Meet Perfection:The Hole Saw Bi-Metal Cups are a revelation for DIY enthusiasts and professionals. These hole saw cups exhibit exceptional durability, with their bi-metal construction ensuring that they remain sharp through countless uses on various materials. Whether cutting wood, metal, or plastic, they offer unparalleled precision, leaving smooth, splinter-free holes. Easy to use and available in a range of sizes, these cups are a valuable addition to any toolkit. While they may be a bit pricier, the quality, longevity, and precision they provide make them a wise investment, ensuring top-notch results in every project.
Date de publication: 2023-10-23
Rated 4 de 5 de par Doesn't look anything like the picture. Cuts great holes, however there was a problem. I don't ... Doesn't look anything like the picture. Cuts great holes, however there was a problem. I don't know if that problem occurred because I was drilling into something too thick or if my arbor/drill was the source of the issue. I have been using it to drill holes in a 1.5 inch thick pine board and it did catch and stall some. Not sure why that was happening but it did ruin the arbor I was using. I now have a 3 inch hole saw stuck on an arbor that had the indexing posts. The bit was installed right and the index posts were used to steady the bit. The threads are mangled and unusable for any other hole saw, I will continue to use it as is. The attached pic now shows the bit and arbor reunited for the next time I need it.
Date de publication: 2019-04-11
Rated 5 de 5 de par Worth it if you need a large hole. I’ve owned a bunch of these Milwaukee hole saws in various sizes over the years and they all seam to just work. Most of my hole boring is done in hard and soft woods, but I’ve also used these in drywall and MDF. I even used one of the diamond variants to cut some holes in tile and that too worked flawless. These do tend to be a bit pricy, but once you have buy it you’ve probably never have to buy another one again. While I haven’t used these in solid metal, I have found they cut through nails in studs with ease. The big takeaway, if Milwaukee’s name is on it, you know it will work as advertised without any issues or defects.
Date de publication: 2023-10-18
Rated 5 de 5 de par Perfect for 3" Sch40 PVC Pipe Installed new 3" Sch40 pipe - an upgrade from an undersized 1-1/2" pipe. Bit created a clean hole through vinyl siding (in reverse), two layers of 1/2" sheathing, old clap-board siding and a 2x stud on its back. All while consuming some of the existing 2" hole. It also gnawed through two 10 penny nails encountered along the way. Just hope its not dull now :)
Date de publication: 2015-04-14
Rated 5 de 5 de par You will never go wrong buying Milwalkee Tools. Very easy to set up and use. I used these hole saws to cut holes in wood flooring and for some plumbing work I did and they worked great. They easily chewed through some old 1 inch hardwood flooring with no problem whatsoever! They didn't move or dance all over the place like the competetion, where they started cutting is where they made the hole. Any holesaw will have wood stuck in the tool after use. Stuck wood in a Milwalkee hole saw no problem . The engineers at Milwalkee designed these tools with punch holes in them so that you can take a punch or screwdriver and knock the wood right out.
Date de publication: 2023-10-23
Rated 1 de 5 de par If cutting metal, look elsewhere Milwaukee is a good brand or so I thought. This saw wouldn't even cut through the sheet metal in a pickup bed to install gooseneck hitch. Don't waist your time with this if wanting to cut metal and thin metal at that.
Date de publication: 2022-03-16
Rated 1 de 5 de par I did not have success using this product I used this with a 1/2” Milwaukee 18v drill and it would not turn it at low speed and kept catching and jerking my arm violently at higher speeds. The auxiliary handle on the drill actually broke off and then the drills continued turning nearly broke my wrist when the saw caught in the wood. Milwaukee needs to specify a proper size drill and max speed for using this as a safety precaution. I literally had smoke running out of two smaller drills before switching to the Milwaukee drill. But NONE of them worked with the six inch hole saw in plywood. What a complete disappointment.
Date de publication: 2020-08-03
Rated 5 de 5 de par Yes you will use and and you will love it Amazing, 10/10 I’m out here drilling holes in things that don’t even need it. I’m putting holes out the back of my furniture to hide cables and build in wireless charging docks. It cut right through a pvc pipe cleanly and I was able to fit a connection perfectly. No jumping or chipping, sturdy and strong with a clean cut. I had tried a lime green piece of junk tool to install a new pin pad door knob and it was a mess but I got it done with this in under 10min. If you need to drill a hole out of something donut hesitate to get yourself one of these!
Date de publication: 2023-10-18
  • y_2024, m_2, d_24, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_24, tr_385
  • loc_fr_CA, sid_1001179599, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 49ms
  • REVIEWS, PRODUCT

Will this hole saw cut metal like in the side of BBQ grill

Posée par: Pappy
If the BBQ is made out of sheet metal, Yes. Just brace a block of wood to the back side to help keep the drill from wobbling and to produce a cleaner cut. Be sure to hold the drill as steady as possible as when it first grabs the metal and when it cuts through the far side it will suddenly catch. Also push gently to avoid biting into too much metal and grabbing also. If your BBQ is out of cast iron, I do not believe it will, but someone else should have better knowledge and experience.
Répondue par: ProjectsAllways3trips2HD
Date de publication: 2023-05-04

Does Home Depot have arbors for 3" Milwaukee Bi-Metal hole saw, Model # 49-56-9637 Store SKU # 229544?

Posée par: WLSmith
Hi there and thank you for your question. Yes we do carry matching arbors for the above selected Milwaukee hole saw. Arbor model # is 49-56-7240 , Store SKU# 250697. Hope this helps George How-To-Community.
Répondue par: SteelToes
Date de publication: 2023-05-02

I have 3/8 thick metal pipe I need to cut a hole in will this do it

Posée par: Jay
No it wont
Répondue par: Dan
Date de publication: 2023-05-05

Will this hole saw cut thru brick

Cutting brick
Posée par: Johannes
No. You'll need a carbide bit to do that.
Répondue par: HomeDepotCustomer
Date de publication: 2023-05-05

Will this cut through fiberglass?

Will this cut through fiberglass?
Posée par: Phil
Sometimes I run the cutter backwards to score the material. It will make a cleaner cut
Répondue par: Sparky
Date de publication: 2023-05-05

can I use the 3 in. hole saw to remove a part of a old toilets broken flange?....like a flange of...

can I use the 3 in. hole saw to remove a part of a old toilets broken flange?....like a flange off tool.
Posée par: lutin
No I wouldn't use it for that
Répondue par: Mrclean527
Date de publication: 2023-05-06

Can I use to cut through 55 gallon drum?

Posée par: Free
yes
Répondue par: HomeDepotCustomer
Date de publication: 2019-09-11

Will this hole saw cut through Stucco? It's about 3/4" thick.

Will this hole saw cut through Stucco? It's about 3/4" thick.
Posée par: Iceman
Hello! Our 3 in. Hole Dozer Bi-Metal Hole Saw (49-56-9637) is for use in metal, aluminum, plaster, drywall, wood, and wood and nails.
Répondue par: Milwaukee Tool
Date de publication: 2023-12-03
  • y_2024, m_2, d_24, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_fr_CA, sid_1001179599, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 67ms
  • QUESTIONS, PRODUCT