• Mobile Menu
    La propreté et la sécurité de nos magasins est l'une de nos principales priorités.En savoir plus

    Milwaukee Tool Fixation à angle droit

    Modèle nº 49-22-8510|Nº UGS 1001170251

    Aperçu

    Modèle # 49-22-8510 Internet # 1001170251

    La fixation à angle droit de Milwaukee permet aux entrepreneurs d'enfoncer des vis et de percer des trous dans des zones de travail étroites et difficiles. Cet accessoire est idéal pour les perceuses sans fil et utilise des accessoires hexagonaux standard de 1/4 de pouce. Il est doté d'un boîtier entièrement métallique durable et d'engrenages en acier avec roulements à billes, ce qui permet à cet adaptateur de supporter jusqu'à 235 lb-pi de couple. La conception compacte ne mesure que 2 pouces de large, ce qui lui permet de s'adapter dans les espaces restreints où le travail est difficile à effectuer. Le mandrin à changement rapide pratique accepte les accessoires standard à entraînement hexagonal 1/4 de pouce.

    1. Conception compacte permettant de travailler dans des espaces restreints
    1. Boîtier métallique et engrenages en acier durables
    1. Capacité nominale jusqu'à 235 lb-pi de couple
    1. Accepte les mèches hexagonales standard de 1/4 de pouce

    Spécifications

    Dimensions

    Hauteur assemblé
    9.5
    Hauteur de l’emballage (en pouces)
    9.5
    Largeur assemblée
    6
    Largeur de l’emballage (en pouces)
    6
    Poids assemblé
    1.11
    Poids de l’emballage (en livres)
    1.11
    Profondeur assemblé
    1.75
    Profondeur de l’emballage (en pouces)
    1.75

    Détails

    Pays d'origine
    TW-Taiwan
    Type daccessoire
    Pleine

    Garanties et certifications

    Pour de plus amples renseignements, veuillez communiquer avec le service à la clientèle au 1 800 268-4015.
    Fixation à angle droitMilwaukee Tool Fixation à angle droitLa fixation à angle droit de Milwaukee permet aux entrepreneurs d'enfoncer des vis et de percer des trous dans des zones de travail étroites et difficiles. Cet accessoire est idéal pour les perceuses sans fil et utilise des accessoires hexagonaux standard de 1/4 de pouce. Il est doté d'un boîtier entièrement métallique durable et d'engrenages en acier avec roulements à billes, ce qui permet à cet adaptateur de supporter jusqu'à 235 lb-pi de couple. La conception compacte ne mesure que 2 pouces de large, ce qui lui permet de s'adapter dans les espaces restreints où le travail est difficile à effectuer. Le mandrin à changement rapide pratique accepte les accessoires standard à entraînement hexagonal 1/4 de pouce.
    Milwaukee Tool
    1001170251
    Fixation à angle droit est évalué 4.6 de 5 de 11.
    • y_2020, m_10, d_26, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
    • cp_1, bvpage1
    • co_hasreviews, tv_2, tr_9
    • loc_fr_CA, sid_1001170251, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 96ms
    • REVIEWS, PRODUCT
    Rated 4 de 5 de par Stupid Milwaukee - No manual on website! Great tool and well built. While paper instructions came with the tool, I wanted to download them to save on my computer. Stupid Milwaukee. Can't even post the .pdf of the 1-page instruction sheet on their website anywhere... Not even under manuals. I would have given 5-stars, but took one off for careleff online product support.
    Date de publication: 2020-07-04
    Rated 5 de 5 de par I love this right angle attachment Like most any thing you buy today you get what you pay for. I'm my work truck I say it about 95% filled with Milwaukee tools! I got this right angle attachment a year ago and it has been just the best one I ever had ever!
    Date de publication: 2020-03-08
    Rated 4 de 5 de par Heavy Duty, but had problems I have had all the light duty option out there. This by far is the best one that you can buy. I have been using it for tight spots screwing & drilling. However, the quick change chuck came completely out of the tool. I put it back in and used it a few more times. Then the same thing happened, got annoying that I couldn't finish the job I was doing. After a half dozen times of this happening, it wouldn't go back in, useless. I had to buy a new replacement. Let down because Im a huge Milwauke tool user/buyer/supporter
    Date de publication: 2020-03-01
    Rated 5 de 5 de par Owner Electric contractor. This one is it. Drilled 3/4” auger holes in 6x6’s many times. Great tool. Way to go Milwaukee.
    Date de publication: 2018-06-08
    Rated 5 de 5 de par Takes a beating! I've used this for three years now on an M18 impact, so almost 1000 inch pounds over rated for years! You can't ask for a tool to be any better!
    Date de publication: 2015-07-17
    Rated 5 de 5 de par It is a superb right angle attachment It is useful for a variety of drilling and screwdriving tasks where the length of a power tool plus drill or screwdriving bit will not fit. I adjust the adjustable, no-slip, handle to fit my needs and the angle at which I am holding the tool. The tool head (right angle gears and case) is compact yet so strong that reliability can be expected.
    Date de publication: 2014-08-30
    Rated 5 de 5 de par Does the job This tool is significantly higher priced than some similar products on the market, but in my opinion, it is very well worth the premium price. This is a high quality tool, that made short work of a deck railing project that I could not have completed without the Milwaukee right angle attachment
    Date de publication: 2013-10-31
    Rated 5 de 5 de par Right Angle Attachment Power Horse My brother and I were working on a project and he had just purchased the Right Angle Attachment. He said here try this. I used this Right Angle Attachment to mount old work boxes to wood studs and it work amazingly. It really works well with impact guns (quick plug and play) and is not phased by the impact. The design allows optimal control. It is by far the best right angle attachment I have used in my 26 years of construction (Commercial and Residental) experience.
    Date de publication: 2012-04-07
    • y_2020, m_10, d_26, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
    • cp_1, bvpage1
    • co_hasreviews, tv_2, tr_9
    • loc_fr_CA, sid_1001170251, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 26ms
    • REVIEWS, PRODUCT

    If I don't have hex-shank drill bits what would I use for a drill bit chuck for this Right Angle attachment?

    Posée par: agd21
    Hi agd21 - Hex shank drill bits are the only shanks that will fit this specific right angle attachment. Any standard drill or impact are compatible with this attachment.
    Répondue par: Milwaukee Tool Support
    Date de publication: 2020-08-21
    • y_2020, m_10, d_26, h_16CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_1
    • loc_fr_CA, sid_1001170251, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 124ms
    • QUESTIONS, PRODUCT