L'événement Stanley Days est en cours. N'attendez pas !  Magasiner l'événement.

Aperçu

Modèle # 48-44-2872 Internet # 1001342339

Nos matrices de remplacement pour tiges filetées de 1/4, 3/8 et 1/2 de pouce produisent des coupes propres et sans bavures. La géométrie de lame supérieure coupe sans effort les tiges filetées 1/4", 3/8", 1/2" en acier doux et 1/4" et les tiges filetées grossières 3/8" en acier inoxydable, sans créer de copeaux ou d'étincelles. Les matrices de coupe de tiges filetées rotatives sur quatre côtés vous permettent de couper les trois tailles de tiges filetées avec le même outil. Les marquages de taille sont clairement indiqués sur toutes les matrices de coupe-fil ainsi que sur les marquages pour le positionnement des mâchoires supérieure et inférieure. Les matrices de remplacement sont compatibles avec notre fraise à tige filetée sans balais M18 (2872-20) et notre kit de fraise à tige filetée sans balais M18 (2872-21).

  1. La géométrie optimale de la lame permet d'obtenir des coupes propres et sans bavures pour le filetage des écrous à la main.
  1. Coupe 1/4 -Inch, 3/8-Inch et 1/2 -Inchen acier doux, 1/4-Inch et 3/8 -Inchen acier inoxydable, tige filetée grossière
  1. Les matrices de coupe rotatives à quatre côtés vous permettent de couper trois tailles différentes de tiges filetées avec le même outil
  1. Les marques de taille sur les matrices doivent correspondre à la taille de la tige filetée
  1. Marques de points sur les matrices pour distinguer les matrices supérieure et inférieure Deux points sur la matrice inférieure à insérer dans la mâchoire inférieure fixe
  1. Comprend: (1) ensemble de matrices de coupe supérieure et inférieure

Spécifications

Dimensions

Hauteur assemblé (en pouces)
1
Hauteur de l’emballage (en pouces)
3.937
Largeur assemblée (en pouces)
1
Largeur de l’emballage (en pouces)
2.953
Poids assemblé (en livres)
0.07
Poids de l’emballage (en livres)
19.954
Profondeur assemblé (en pouces)
0.4
Profondeur de l’emballage (en pouces)
0.236

Détails

Pays d'origine
CN-China

Garanties et certifications

Pour plus d'informations, veuillez composer le 1-800-268-4015
Jeu de matrices de rechange 1/4", 3/8", 1/2" pour découpage de rechangeMilwaukee Tool Jeu de matrices de rechange 1/4", 3/8", 1/2" pour découpage de rechangeNos matrices de remplacement pour tiges filetées de 1/4, 3/8 et 1/2 de pouce produisent des coupes propres et sans bavures. La géométrie de lame supérieure coupe sans effort les tiges filetées 1/4", 3/8", 1/2" en acier doux et 1/4" et les tiges filetées grossières 3/8" en acier inoxydable, sans créer de copeaux ou d'étincelles. Les matrices de coupe de tiges filetées rotatives sur quatre côtés vous permettent de couper les trois tailles de tiges filetées avec le même outil. Les marquages de taille sont clairement indiqués sur toutes les matrices de coupe-fil ainsi que sur les marquages pour le positionnement des mâchoires supérieure et inférieure. Les matrices de remplacement sont compatibles avec notre fraise à tige filetée sans balais M18 (2872-20) et notre kit de fraise à tige filetée sans balais M18 (2872-21).
Milwaukee Tool
1001342339
CAD1492024-02-24
Home Depot Canada
Jeu de matrices de rechange 1/4", 3/8", 1/2" pour découpage de rechange est évalué 4.6 de 5 de 19.
  • y_2024, m_2, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_15
  • loc_fr_CA, sid_1001342339, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 72ms
  • REVIEWS, PRODUCT
Rated 5 de 5 de par This product is designed to be used with the Milwaukee Threaded Rod Cutter 2872-21. It includes a... [This review was collected as part of a promotion.] This product is designed to be used with the Milwaukee Threaded Rod Cutter 2872-21. It includes a top and bottom die for the cutter which supports 1/4 inch, 3/8 inch and 1/2 inch course thread rods. The dies are marked with a single dot for the bottom die and a double dot for the top die. These went into the threaded rod cutter easily and were an exact match to the set that was being replaced. They performed exactly as expected. The dies support the following materials: Mild Steel: 1/4"-20 3/8”-16 1/2"-13 M6x1 M8x1.25 M10x1.5 M12x1.75 Stainless Steel: 1/4"-20 3/8”-16 M6x1 M8x1.25 M10x1.5
Date de publication: 2019-04-07
Rated 4 de 5 de par I got this replacement die set as I purchased the M18 threaded rod cutter as well. As a new tool,... [This review was collected as part of a promotion.] I got this replacement die set as I purchased the M18 threaded rod cutter as well. As a new tool, I am not sure how long the life span of the cutting dies will last so I got a replacement set of dies just in case. After testing the tool cutting 3/8" mild steel threaded rod and inspected the dies, I did not see any wear after half a dozen cuts, nor did I notice any difference in time it took to cut the rod. Milwaukee doesn't state how many cuts a die will make, but I am guessing if the tool is taken care of and if the dies are not allowed to heat up from multiple cuts in a row, they will last for several hundred cuts or more. That is my assumption though.
Date de publication: 2019-04-07
Rated 5 de 5 de par Replacement die set for the excellent threaded rod cutter. Very impressed with this tool. I like ... [This review was collected as part of a promotion.] Replacement die set for the excellent threaded rod cutter. Very impressed with this tool. I like the portability of it to use at practicably any location under various configurations. A great use was for hanging trapeze supports for conduit and pipe supports. Easily set the elevation with the threaded rod and cut as required. No burrs, no wasted time - very professional job. Additionally this can be operated on a bench for multiple cuts and fabricating threaded rod for specific purposes and lengths. Great tool!
Date de publication: 2019-05-01
Rated 5 de 5 de par The 1/4", 3/8", 1/2" REPLACEMENT CUTTING DIE SET is a perfect fit on the Milwaukee M18 18-Volt Li... [This review was collected as part of a promotion.] The 1/4", 3/8", 1/2" REPLACEMENT CUTTING DIE SET is a perfect fit on the Milwaukee M18 18-Volt Lithium-Ion Cordless Brushless Threaded Rod Cutter. The grooves line up to the threads of all thread as they should. The set of cutting dies that came with my rod cutter have held up well. I wanted this replacement set as a back-up in case I chip the one on my thread cutter. If one of the cutting dies do happen to chip it will cause a burr in the threads making it difficult to install nuts.
Date de publication: 2019-03-26
Rated 5 de 5 de par I used this to cut some 1/4"-20 course threadrods. I needed the rods cut for some camera mounts t... [This review was collected as part of a promotion.] I used this to cut some 1/4"-20 course threadrods. I needed the rods cut for some camera mounts that I am building. Prior to having this, my plan was to a recip saw or a hacksaw. This cut the rod CLEANLY in about 2 seconds. There were no burrs to clean up or tend to. I found that laying the rod cutter down and operating it that way works best due to the heavy weight of the tool. Changing the cutting die was quick and easy, you have to use an allen wrench to remove the screw
Date de publication: 2019-04-02
Rated 5 de 5 de par I love how easy it is with the Milwaukee threaded rod cutter to cut rods. The cutting dies are st... [This review was collected as part of a promotion.] I love how easy it is with the Milwaukee threaded rod cutter to cut rods. The cutting dies are strong and of good quality, but nothing lasts forever if you use it regularly. So, this 1/4 IN./3/8 IN./1/2 IN. REPLACEMENT THREADED ROD CUTTING DIE SET is due at some point. The replacement is fairly easy and straight forward. Replacing the old dies with new Milwaukee dies essentially gives you a new rod cutter, at least it works like new.
Date de publication: 2019-04-02
Rated 4 de 5 de par For some reason I thought these were for threading rods these are for cutting threaded rod 1/4" t... [This review was collected as part of a promotion.] For some reason I thought these were for threading rods these are for cutting threaded rod 1/4" thru 3/8" or what would be called all-thread rod. Each insert has a 1/4" NC threaded hole in the center. The cutters come in a nice blister pack and they are very cleanly made and can also be used for cleaning up threaded rods after being cut with a hack saw. Overall these are nicely made and are made out of a very hard steel.
Date de publication: 2019-04-05
Rated 5 de 5 de par The Milwaukee Threaded rod die cutter is a great tool... Having a spare set of cutters makes it e... [This review was collected as part of a promotion.] The Milwaukee Threaded rod die cutter is a great tool... Having a spare set of cutters makes it even better, I cut a lot of 1/2 inch threaded rod (60-80 pieces) and the tool was starting to not work well and slow down. Jut remove the allen screws and pop in the new die, and it cuts just like brand new again. Well worth the money and helps you get a lot more mileage out of a great tool.
Date de publication: 2019-04-12
  • y_2024, m_2, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_15
  • loc_fr_CA, sid_1001342339, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 51ms
  • REVIEWS, PRODUCT

How many cuts do I get with 3/8 regular zinc rod with the die heads before they wear out?

Posée par: Anonyme
There is no specific amount of cuts listed before having to replace a die set.
Répondue par: MilwaukeeElectric
Date de publication: 2023-05-06

Does this actually thread and cut solid rod or does it just cut already threaded rod?

Posée par: US1A1A
cuts only
Répondue par: MilwaukeeElectric
Date de publication: 2023-05-06

does this die set come with the Allen bolts needed to mount them to tool?

I'm not 100% sure that they are Allen bolts but I figured they were because the cutter came with a allen wrench, but mine did not come with dies or bolts.
Posée par: Eddie
No, it does not come with Allen bolts.
Répondue par: Communityanswer
Date de publication: 2023-05-06

Are dies available for fine threaded rod? I cut a lot of 1/2-20 rod. I’m not seeing UNF dies?

Posée par: JSM
Hi JSM, thank you for your inquiry. Unfortunately we do not offer that size replacement die on Homedepot.com at this time. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
Répondue par: THDSupport
Date de publication: 2023-05-07

Is this brushless?

Posée par: Masterofthreads
  • y_2024, m_2, d_23, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_fr_CA, sid_1001342339, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 141ms
  • QUESTIONS, PRODUCT