Livraison express en 3 heures à partir de 9,97 $*  En savoir plus

Milwaukee Tool Jeu de mèches en titane SHOCKWAVE IMPACT DUTY (23 pièces)

Modèle nº 48-89-4631|Nº UGS 1001168748

Aperçu

Modèle # 48-89-4631 Internet # 1001168748

Le jeu de mèches en titane MILWAUKEE 23 pièces SHOCKWAVE RED HELIX est conçu pour une durabilité extrême et une longue vie. La pointe QUAD EDGE offre un démarrage de précision et quatre arêtes de coupe pour créer des copeaux plus petits pour un enlèvement plus rapide et moins de chaleur, ce qui prolonge la durée de vie de la mèche. Conçues avec une hélice variable qui comprend un angle hélicoïdal agressif de 35 degrés, qui se termine à 15 degrés, ces mèches coniques avec RED HELIX permettent un enlèvement rapide des copeaux en limitant l'accumulation de chaleur pour rester plus longtemps affûtées. Les forets sont également dotés d'une toile interne ENHANCED TAPERED WEB qui augmente considérablement leur résistance, réduisant ainsi les casses prématurées. Idéales pour diverses applications, notamment le bois, les plastiques et les métaux, les mèches en titane Red Helix de Milwaukee offrent une durée de vie jusqu'à 5 fois supérieure à celle des mèches en oxyde noir.

  1. 5X Life contre les forets à oxyde noir
  1. Jambes hexagonales de 1/4 de pouce. Utilisation dans les exercices ou les conducteurs à percussion
  1. SHOCKWAVE Impact Duty Bits
  1. Pointe à point de rupture de 135 degrés
  1. Un revêtement en titane pour une plus grande longévité
  1. Idéal pour le bois, les plastiques et les métaux
  1. Mèches SHOCKWAVE incluses : (2) 1/16 pouce, (2) 5/64 pouce, (1) 3/32 pouce, (2) 7/64 pouce, (2) 1/8 pouce, (2) 9/64 pouce, (2) 5/32 pouce, (1) 11/64 pouce, (2) 3/16 pouce, (1) 13/64 pouce, (1) 7/32 pouce, (1) 15/64 pouce, (2) 1/4 pouce, (1) 5/16 pouce, (1) 3/8 pouce

Spécifications

Dimensions

Hauteur assemblé (en pouces)
10.28
Hauteur de l’emballage (en pouces)
10.28
Largeur assemblée (en pouces)
9.85
Largeur de l’emballage (en pouces)
9.85
Poids assemblé (en livres)
1.57
Poids de l’emballage (en livres)
1.57
Profondeur assemblé (en pouces)
2.76
Profondeur de l’emballage (en pouces)
2.76

Détails

Arbre inclus
Non
Article individuel, Ensemble
Ensemble
Caractéristiques des accessoires pour outils à moteur
Universel
Matériau de la mèche
Titane
Matériau de la pointe
Titane
Nombre de pièces dans l'ensemble
23
Pays d'origine
CN-China
Source dalimentation
Sans fil
Type d'accessoire pour outils à moteur
Mèches hélicoïdales
Type de mèche
Mèche pour perceuse à percussion
Type de tige
Hexagonale
Utilisation
Aluminium, Bois et métal

Garanties et certifications

Garantie limitée à vie. Pour de plus amples informations, veuillez appeler le 1-877-948-2360.
Jeu de mèches en titane SHOCKWAVE IMPACT DUTY (23 pièces)Milwaukee Tool Jeu de mèches en titane SHOCKWAVE IMPACT DUTY (23 pièces)Le jeu de mèches en titane MILWAUKEE 23 pièces SHOCKWAVE RED HELIX est conçu pour une durabilité extrême et une longue vie. La pointe QUAD EDGE offre un démarrage de précision et quatre arêtes de coupe pour créer des copeaux plus petits pour un enlèvement plus rapide et moins de chaleur, ce qui prolonge la durée de vie de la mèche. Conçues avec une hélice variable qui comprend un angle hélicoïdal agressif de 35 degrés, qui se termine à 15 degrés, ces mèches coniques avec RED HELIX permettent un enlèvement rapide des copeaux en limitant l'accumulation de chaleur pour rester plus longtemps affûtées. Les forets sont également dotés d'une toile interne ENHANCED TAPERED WEB qui augmente considérablement leur résistance, réduisant ainsi les casses prématurées. Idéales pour diverses applications, notamment le bois, les plastiques et les métaux, les mèches en titane Red Helix de Milwaukee offrent une durée de vie jusqu'à 5 fois supérieure à celle des mèches en oxyde noir.
Milwaukee Tool
1001168748
CAD56.982022-10-04
Home Depot Canada
Jeu de mèches en titane SHOCKWAVE IMPACT DUTY (23 pièces) est évalué 4.4 de 5 de 2054.
  • y_2022, m_10, d_3, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_326, tr_1728
  • loc_fr_CA, sid_1001168748, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 81ms
  • REVIEWS, PRODUCT
Rated 1 de 5 de par I purchased this set due to the name brand and THOUGHT they would be a good set of drill bits for... I purchased this set due to the name brand and THOUGHT they would be a good set of drill bits for the money. They even have written on the packaging they are made for metal. I drilled 2 holes and STARTED on the third hole and the drill bit had dulled so much I was unable to finish the hole. I had to drill a pilot hole with three sizes down, move up one size at a time, and then pushed HARD for several minutes to finish that third hole! it was just a bed frame angle iron piece I was drilling through so it was not a thick piece of metal! I am absolutely and completely disappointed in these Milwaukee drill bits and will NOT recommend these to anyone! Jerome Snider
Date de publication: 2018-05-03
Rated 5 de 5 de par Great assortment of drill bits that are stored in a durable compact case. I have been using this... Great assortment of drill bits that are stored in a durable compact case. I have been using this set for nearly a year on different materials and the bits have remained sharp and true. The 1/4" base is great in cordless drills as you don't have to expand and tighten the jaws much to fit all the various sizes. My only gripe is the bits can be difficult to remove from their slots, sometimes needing needle-nose pliers to get them out of the case. This is definitely my go-to set of drill bits and store easily in my toolbox.
Date de publication: 2018-12-04
Rated 1 de 5 de par Does not hold up to stainless steel I have always believed that Milwaukee tools were high quality. I have both their 12V Cordless Impact Driver and Drill. Also have a couple of their lights. I purchased their Shockwave drill bits and impact driver sets to use with the impact driver and drill. I had my first opportunity to use these drill bits yesterday; had to drill holes on our stainless steel baking rings. The drill bits could not even make it through 3 holes. I dug out my old Black & Decker drill bits to finish the job. Now I'm stuck with expensive and useless bits. Not recommended.
Date de publication: 2021-05-15
Rated 3 de 5 de par The drill bit itself worked well, but the 1/2" bit sheered off from the chuck area the first time... The drill bit itself worked well, but the 1/2" bit sheered off from the chuck area the first time I used it to drill into an aluminum tube. Aluminum is much to soft to have caused this bit to snap, especially on its first use. The smaller bits have held up better, but considering the fact that the largest bit, which played a large part in my determination to buy the kit only worked once, I can not recommend them. I expected better from a Shockwave set.
Date de publication: 2017-01-07
Rated 1 de 5 de par Not worth the money or frustration Have used Milwaukee tools and Accessories for years and have been satisfied with their performance so expectations were high with the shockwave drill bits. I started to use the drill bits for a barn I was building pre drilled into some wood and in less than five minutes the bit snapped grabbed another not five minutes later snapped again. Later when installing the metal roofing and pre-drilling again the same sad story but worse. Unfortunately I had purchased two kits so I was able to witness every snap of every bit I used. If this is the state of Milwaukee tools I won’t be purchasing anything with them ever again. On a side note I also used the Milwaukee 1/4” magnetic nut driver to remove some metal siding and within 1/2 hour it was stripped out...
Date de publication: 2019-11-22
Rated 2 de 5 de par I want my money back These drill bits drill nice, but when installing hardwood floor for the starter strips I drilled pilot holes for standard finish nails. I snapped 3 bits by drilling through the hardwood and accidentally hitting nails in the subfloor. After the first drill bit snapped I was very gentle about drilling subsequent holes. But unfortunately as careful as I was, I still snapped 2 additional bits. I’m going to see if Home Depot can return these for me. $45 is too much for my wallet on a product that breaks this easily.
Date de publication: 2020-03-29
Rated 5 de 5 de par This how drill bits should be done.... Popular sizes doubled up. Simple HD case with a real latch... This how drill bits should be done.... Popular sizes doubled up. Simple HD case with a real latch. Secure bit holders and maders to last.
Date de publication: 2018-10-23
Rated 5 de 5 de par Easley drilled through 1/2 steel very impressed Easley drilled through 1/2 steel very impressed
Date de publication: 2019-04-02
  • y_2022, m_10, d_3, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_326, tr_1728
  • loc_fr_CA, sid_1001168748, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 48ms
  • REVIEWS, PRODUCT

how can people be so dumb that they are wondering what to do with the oil on the packaged bits?

Posée par: rickthecaroenter
You will see people unfamiliar with tools or whatever asking head scratcher questions. I just have to try and figure out what was the context of there thought. Was it something they were unfamiliar with, was there something defective or was the product faulty. Who knows but that is why I think I see questions about products that I can't relate too or think don't make allot of sense.
Répondue par: UncleEd
Date de publication: 2021-07-05

can we use this to drill thru brick?

can we use this to drill thru brick?
Posée par: Baskar
It will destroy the bit in seconds
Répondue par: Fred
Date de publication: 2020-07-07

What are the sizes in the kit

What are the sizes in the kit
Posée par: Skip
1/8, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/8, 13/64, 7/32, 15/64, 1/4, 5/16, 3/8, 1/2
Répondue par: FishFool
Date de publication: 2020-06-11

Will these bits work for ceramic tile?

Will these bits work for ceramic tile?
Posée par: Chili
No, you need a masonary bit for ceramic tile.
Répondue par: Hootney
Date de publication: 2020-07-07

Are these bits 3/8th drive accessable for a impact drill?

Posée par: Dzullo
I wouldn't use them for that, especially if your using them on concrete. You should use concreate impact bits for that, they have a arrow-head that's made for hammering into concreate.
Répondue par: Marc
Date de publication: 2019-08-23

What is the size of the Hex Shank? Would it fit a 1/4" hex shank impact driver?

What is the size of the Hex Shank? Would it fit a 1/4" hex shank impact driver?
Posée par: Jack
yes
Répondue par: Gregory
Date de publication: 2020-07-07

can you use this drill into wood?

Posée par: john
Yes! These will drill through wood very easily.
Répondue par: AZHawg
Date de publication: 2018-04-26

Whats the need of two of the same bits? Iknow its a little convenient to have two of the same, but is it necessary?

Posée par: Paco
It’s not necessary, they generally have doubles on common sizes as the more they are used the more likely they are to break. This way there is already a backup.
Répondue par: John
Date de publication: 2021-06-26
  • y_2022, m_10, d_3, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_44
  • loc_fr_CA, sid_1001168748, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT